Skip to contentSkip to conversation

hw/arm/aspeed: fix connect_serial_hds_to_uarts

PATCH Applied kenneth_jia--- via 3 participants 6 messages Dec 12, 2024 – Dec 13, 2024 Arm/Aspeed machine support

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 hw/arm/aspeed: fix connect_serial_hds_to_uarts

From 24d3badbbb9dcc0d220609a7dd30f8da5002cba7 Mon Sep 17 00:00:00 2001
From: Kenneth Jia <[email protected]>
Date: Thu, 12 Dec 2024 20:42:04 +0800
Subject: [PATCH] hw/arm/aspeed: fix connect_serial_hds_to_uarts

In the loop, we need ignore the index increase when uart == uart_chosen We should increase the index only after we allocate a serial.

---
hw/arm/aspeed.c | 4 ++--

1 file changed, 2 insertions(+), 2 deletions(-)
hw/arm/aspeed.c +2 -2
index 556498f2a0..d8cb2d1429 100644
@@ -364,11 +364,11 @@ static void connect_serial_hds_to_uarts(AspeedMachineState *bmc)
     int uart_chosen = bmc->uart_chosen ? bmc->uart_chosen : amc->uart_default;
 
     aspeed_soc_uart_set_chr(s, uart_chosen, serial_hd(0));
-    for (int i = 1, uart = sc->uarts_base; i < sc->uarts_num; i++, uart++) {
+    for (int i = 1, uart = sc->uarts_base; i < sc->uarts_num; uart++) {
         if (uart == uart_chosen) {
             continue;
         }
-        aspeed_soc_uart_set_chr(s, uart, serial_hd(i));
+        aspeed_soc_uart_set_chr(s, uart, serial_hd(i++));
     }

}

--
2.34.1

Reviewed-by on v1 1/1
#1 lore raw

Hello Kenneth,

Quoted 6 lines · Kenneth Jia(贾纪东_华硕上海)

From 24d3badbbb9dcc0d220609a7dd30f8da5002cba7 Mon Sep 17 00:00:00 2001

From: Kenneth Jia <[email protected]>

Date: Thu, 12 Dec 2024 20:42:04 +0800

Quoted 7 lines

Subject: [PATCH]    hw/arm/aspeed: fix connect_serial_hds_to_uarts

   In the loop, we need ignore the index increase when uart == uart_chosen

   We should increase the index only after we allocate a serial.

Could you please tell us a bit on your test environment ? I am interested to know how you found the issue.

Also, please use "git send-email" to send patches.

Anyhow,

Fixes d2b3eaefb4d7 ("aspeed: Refactor UART init for multi-SoC machines")

Thanks,

C.

Quoted 43 lines

---

hw/arm/aspeed.c | 4 ++--

1 file changed, 2 insertions(+), 2 deletions(-)
hw/arm/aspeed.c +0 -0

index 556498f2a0..d8cb2d1429 100644

--- a/hw/arm/aspeed.c

+++ b/hw/arm/aspeed.c

hw/arm/aspeed.c +1 -1
@@ -364,11 +364,11 @@ static void connect_serial_hds_to_uarts(AspeedMachineState *bmc)
 
      int uart_chosen = bmc->uart_chosen ? bmc->uart_chosen : amc->uart_default;
 
      aspeed_soc_uart_set_chr(s, uart_chosen, serial_hd(0));
 
-    for (int i = 1, uart = sc->uarts_base; i < sc->uarts_num; i++, uart++) {
 
+    for (int i = 1, uart = sc->uarts_base; i < sc->uarts_num; uart++) {
 
          if (uart == uart_chosen) {
 
              continue;

         }

-        aspeed_soc_uart_set_chr(s, uart, serial_hd(i));

+        aspeed_soc_uart_set_chr(s, uart, serial_hd(i++));

     }

}

--

2.34.1

Reviewed-by Cédric Le Goater
#2 lore raw

We plans to use a relatively large number of UART connections, and currently test all UARTs that can be used.
When we use qumu for simulation, the problem was discovered.
The current code does not allocate char devices with index 5 (label serial5).
And even if there are more serial devices, the last one (UAR12) is not connected to serial.

Add debug information to watch:

hw/arm/aspeed.c +1 -0
index 556498f2a0..786df450ed 100644
@@ -369,6 +369,7 @@ static void connect_serial_hds_to_uarts(AspeedMachineState *bmc)
             continue;
         }
         aspeed_soc_uart_set_chr(s, uart, serial_hd(i));
+       printf("uart %d char index %d name %s\n", uart-sc->uarts_base, i, serial_hd(i)?serial_hd(i)->filename:"null");
     }
 }
 

Test command

        ~/office_qemu/build/qemu-system-arm -m 1G -M ast2600-evb,fmc-model=mx66l1g45g -nographic \
        -drive file=./${evb}.bin,format=raw,if=mtd,unit=0 \
        -drive file=./emmc1.bin,format=raw,if=sd,unit=2 \
        -net nic -net nic -net nic -net nic \
        -net user,hostfwd=::2443-:443,hostfwd=::2242-:22,hostfwd=udp::2623-:623 \
        -serial pty \
        -serial pty \
        -serial pty \
        -serial pty \
        -serial pty \
        -serial pty \
        -serial pty \
        -serial pty \
        -serial pty \
        -serial pty \
        -serial pty \
        -serial pty \
        -serial pty \
        -serial pty

Output Log:

QEMU 9.2.50 monitor - type 'help' for more information char device redirected to /dev/pts/6 (label serial0) char device redirected to /dev/pts/7 (label serial1) char device redirected to /dev/pts/8 (label serial2) char device redirected to /dev/pts/9 (label serial3) char device redirected to /dev/pts/10 (label serial4) char device redirected to /dev/pts/11 (label serial5) char device redirected to /dev/pts/12 (label serial6) char device redirected to /dev/pts/13 (label serial7) char device redirected to /dev/pts/14 (label serial8) char device redirected to /dev/pts/15 (label serial9) char device redirected to /dev/pts/16 (label serial10) char device redirected to /dev/pts/17 (label serial11) char device redirected to /dev/pts/19 (label serial12) char device redirected to /dev/pts/21 (label serial13) char device redirected to /dev/pts/22 (label serial14) uart 0 char index 1 name pty:/dev/pts/7
uart 1 char index 2 name pty:/dev/pts/8
uart 2 char index 3 name pty:/dev/pts/9
uart 3 char index 4 name pty:/dev/pts/10
uart 5 char index 6 name pty:/dev/pts/12
uart 6 char index 7 name pty:/dev/pts/13
uart 7 char index 8 name pty:/dev/pts/14
uart 8 char index 9 name pty:/dev/pts/15
uart 9 char index 10 name pty:/dev/pts/16 uart 10 char index 11 name pty:/dev/pts/17 uart 11 char index 12 name pty:/dev/pts/19 (qemu)

Issue:
/dev/pts/17 (label serial11) is not connected to a UART, UART12 is not connect to a serial device.

-----邮件原件-----
发件人: Cédric Le Goater <[email protected]>
发送时间: 2024年12月13日 15:19
收件人: Kenneth Jia(贾纪东_华硕上海) <[email protected]>; '[email protected]' <[email protected]> 抄送: 'Cédric Le Goater' <[email protected]>; 'Philippe Mathieu-Daudé' <[email protected]

Quoted 9 lines

Subject: [PATCH]    hw/arm/aspeed: fix connect_serial_hds_to_uarts

   In the loop, we need ignore the index increase when uart ==
uart_chosen

   We should increase the index only after we allocate a serial.

Could you please tell us a bit on your test environment ? I am interested to know how you found the issue.

Also, please use "git send-email" to send patches.

Anyhow,

Fixes d2b3eaefb4d7 ("aspeed: Refactor UART init for multi-SoC machines")

Thanks,

C.

Quoted 41 lines

---

hw/arm/aspeed.c | 4 ++--

1 file changed, 2 insertions(+), 2 deletions(-)
hw/arm/aspeed.c +0 -0

index 556498f2a0..d8cb2d1429 100644

--- a/hw/arm/aspeed.c

+++ b/hw/arm/aspeed.c

hw/arm/aspeed.c +3 -2
@@ -364,11 +364,11 @@ static void 
 connect_serial_hds_to_uarts(AspeedMachineState *bmc)
 
      int uart_chosen = bmc->uart_chosen ? bmc->uart_chosen : 
 amc->uart_default;
 
      aspeed_soc_uart_set_chr(s, uart_chosen, serial_hd(0));
 
-    for (int i = 1, uart = sc->uarts_base; i < sc->uarts_num; i++, 
 uart++) {
 
+    for (int i = 1, uart = sc->uarts_base; i < sc->uarts_num; uart++) 
+{
 
          if (uart == uart_chosen) {
 
              continue;
 
          }
 
-        aspeed_soc_uart_set_chr(s, uart, serial_hd(i));
 
+        aspeed_soc_uart_set_chr(s, uart, serial_hd(i++));
 
      }
Quoted 6 lines

}

--

2.34.1

<p></p>

#3 lore raw
Quoted 2 lines · Kenneth Jia(贾纪东_华硕上海)

We plans to use a relatively large number of UART connections, and currently test all UARTs that can be used.
When we use qumu for simulation, the problem was discovered.

Which QEMU machine are you using ?

Thanks,

C.

#4 lore raw
Quoted 1 line

Which QEMU machine are you using ?

ast2600-evb

Thanks,

Kenneth

-----邮件原件-----
发件人: Cédric Le Goater <[email protected]>
发送时间: 2024年12月13日 17:57
收件人: Kenneth Jia(贾纪东_华硕上海) <[email protected]>; '[email protected]' <[email protected]>
抄送: 'Cédric Le Goater' <[email protected]>; 'Philippe Mathieu-Daudé' <[email protected]>; 'Jamin Lin' <[email protected]>; 'Andrew Jeffery' <[email protected]>; 'Gavin Shan' <[email protected]>; 'open list:All patches CC here' <[email protected]> 主题: Re: 答复: [PATCH] hw/arm/aspeed: fix connect_serial_hds_to_uarts

External email : Ensure your email is secure before opening links and attachments.

Quoted 2 lines · Kenneth Jia(贾纪东_华硕上海)

We plans to use a relatively large number of UART connections, and currently test all UARTs that can be used.
When we use qumu for simulation, the problem was discovered.

Which QEMU machine are you using ?

Thanks,

C.

<p></p>

#5 lore raw
In reply to kenneth_jia--- via
Quoted 6 lines · Kenneth Jia(贾纪东_华硕上海)

From 24d3badbbb9dcc0d220609a7dd30f8da5002cba7 Mon Sep 17 00:00:00 2001

From: Kenneth Jia <[email protected]>

Date: Thu, 12 Dec 2024 20:42:04 +0800

Quoted 8 lines

Subject: [PATCH]    hw/arm/aspeed: fix connect_serial_hds_to_uarts

   In the loop, we need ignore the index increase when uart == uart_chosen

   We should increase the index only after we allocate a serial.

Applied to aspeed-next.

Thanks,

C.