Fix for longhaul deadlock ?
Hi,
VIA recently pretended to have fixed the long-known longhaul bug. I've diff'ed the longhaul.c file from kernel tree against their patched version. Result is attached. I didn't tested it and I don't pretend to understand what the patch does, but I though I just post it here in case someone more knowledgeable could kindly take a look. For reference, here is the link to VIA site : http://www.viaarena.com/default.aspx?PageID=420&OSID=30&CatID=2800
Regards,
Xavier
longhaul.c.via renamed from longhaul.c.kernel +99 -40
@@ -14,7 +14,7 @@ * until we have code that gets it right. * Version 3 of longhaul got renamed to Powersaver and redesigned * to use the POWERSAVER MSR at 0x110a. - * It is present in Ezra-T (C5M), Nehemiah (C5X) and above. + * It is present in Ezra-T (C5M), Nehemiah (C5XLOE/C5XLOH/C5P) and above. * It's pretty much the same feature wise to longhaul v2, though * there is provision for scaling FSB too, but this doesn't work * too well in practice so we don't even try to use this.
@@ -60,9 +60,12 @@ /* Module parameters */ static int dont_scale_voltage; - +#define CPUFREQ_DEBUG_DRIVER 2 +#define halt() __asm__ __volatile__("hlt": : :"memory") +#define self_halt() __asm__ __volatile__("sti; hlt": : :"memory") #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg) - +#define DEFINE_SPINLOCK(x) spinlock_t x = SPIN_LOCK_UNLOCKED +static DEFINE_SPINLOCK(disable_ratelimit_lock); /* Clock ratios multiplied by 10 */ static int clock_ratio[32];
@@ -71,24 +74,37 @@ static unsigned int highest_speed, lowest_speed; /* kHz */ static int longhaul_version; static struct cpufreq_frequency_table *longhaul_table; +static unsigned int debug; +static unsigned int debug_ratelimit = 1; +static unsigned int disable_ratelimit = 1; + +void cpufreq_debug_printk(unsigned int type, const char *prefix, const char *fmt, ...) +{ + char s[256]; + va_list args; + unsigned int len; + unsigned long flags; + + WARN_ON(!prefix); + if (type & debug) { + spin_lock_irqsave(&disable_ratelimit_lock, flags); + if (!disable_ratelimit && debug_ratelimit && !printk_ratelimit()) { + spin_unlock_irqrestore(&disable_ratelimit_lock, flags); + return; + } + spin_unlock_irqrestore(&disable_ratelimit_lock, flags); -#ifdef CONFIG_CPU_FREQ_DEBUG -static char speedbuffer[8]; + len = snprintf(s, 256, KERN_DEBUG "%s: ", prefix); -static char *print_speed(int speed) -{ - if (speed > 1000) { - if (speed%1000 == 0) - sprintf (speedbuffer, "%dGHz", speed/1000); - else - sprintf (speedbuffer, "%d.%dGHz", speed/1000, (speed%1000)/100); - } else - sprintf (speedbuffer, "%dMHz", speed); + va_start(args, fmt); + len += vsnprintf(&s[len], (256 - len), fmt, args); + va_end(args); - return speedbuffer; -} -#endif + printk(s); + WARN_ON(len < 5); + } +} static unsigned int calc_speed(int mult) {
@@ -118,10 +134,10 @@ static void do_powersaver(union msr_longhaul *longhaul, unsigned int clock_ratio_index) { - struct pci_dev *dev; + int version; unsigned long flags; unsigned int tmp_mask; - int version; + struct pci_dev *dev; int i; u16 pci_cmd; u16 cmd_state[64];
@@ -227,8 +243,8 @@ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - dprintk ("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n", - fsb, mult/10, mult%10, print_speed(speed/1000)); + dprintk ("Setting to FSB:%dMHz Mult:%d.%dx (%d)\n", + fsb, mult/10, mult%10, speed/1000); switch (longhaul_version) {
@@ -258,7 +274,8 @@ break; /* - * Longhaul v3 (aka Powersaver). (Ezra-T [C5M] & Nehemiah [C5N]) + * Longhaul v3 (aka Powersaver). (Ezra-T [C5M] & Nehemiah + * [C5XLOE/C5XLOH/C5P] * We can scale voltage with this too, but that's currently * disabled until we come up with a decent 'match freq to voltage' * algorithm.
@@ -280,6 +297,7 @@ * Centaur decided to make life a little more tricky. * Only longhaul v1 is allowed to read EBLCR BSEL[0:1]. * Samuel2 and above have to try and guess what the FSB is. + #define hlt() __asm__ __volatile__("hlt": : :"memory") * We do this by assuming we booted at maximum multiplier, and interpolate * between that value multiplied by possible FSBs and cpu_mhz which * was calculated at boot time. Really ugly, but no other way to do this.
@@ -329,6 +347,7 @@ unsigned int eblcr_fsb_table_v1[] = { 66, 133, 100, -1 }; unsigned int eblcr_fsb_table_v2[] = { 133, 100, -1, 66 }; + unsigned long deviceid=0,cpufreqdiv=0; // FSB 200 MHz switch (longhaul_version) { case TYPE_LONGHAUL_V1: case TYPE_LONGHAUL_V2:
@@ -377,19 +396,59 @@ * We're possibly using something undocumented and unsupported, * But it works, so we don't grumble. */ - minmult=40; - maxmult=longhaul_get_cpu_mult(); - /* Starting with the 1.2GHz parts, theres a 200MHz bus. */ - if ((cpu_khz/1000) > 1200) - fsb = 200; - else - fsb = eblcr_fsb_table_v2[longhaul.bits.MaxMHzFSB]; - break; - } +/* VIA improved the 200MHz FSB by Eddy Fu (2005-05-18) */ + // started + __asm__ ( + "movl $0x80000200, %%eax\n\r" + "movl $0x0cf8, %%edx\n\r" + "outl %%eax, %%dx\n\r" + + "movl $0x0cfc, %%edx\n\r" + "inl %%dx, %%eax\n\r" + "movl %%eax, %0\n\r" + :"=m" (deviceid) + ); + // printk("deviceid=%lx\n",deviceid); + if (deviceid == 0x22591106) { + // Read System Frequency Divider Rx54[7:5] + + __asm__ ( + "movl $0x80000254, %%eax\n\r" + "movl $0x0cf8, %%edx\n\r" + "outl %%eax, %%dx\n\r" + + "movl $0x0cfc, %%edx\n\r" + "inl %%dx, %%eax\n\r" + "andl $0x000000e0, %%eax\n\r" + "movl %%eax, %0\n\r" + :"=m" (cpufreqdiv) + ); + // dprintk("cpufreqdiv = %lx\n", cpufreqdiv); + if (cpufreqdiv == 0x00) + fsb = 100; + if (cpufreqdiv == 0x20) + fsb = 133; + if (cpufreqdiv == 0x40) + fsb = 200; + // dprintk ("VIA Nehemiah CPU's FSB=%d.\n", fsb); + } + else + { + rdmsrl (MSR_VIA_LONGHAUL, longhaul.val); + fsb = eblcr_fsb_table_v2[longhaul.bits.MaxMHzFSB]; + } + minmult=40; + maxmult=longhaul_get_cpu_mult(); + // dprintk ("VIA Nehemiah CPU's maxmult = %d .\n", maxmult); + // dprintk ("VIA Nehemiah CPU's FSB = %d .\n", fsb); + // finished + break; + } + } - dprintk ("MinMult:%d.%dx MaxMult:%d.%dx\n", + printk (KERN_INFO PFX "MinMult: %d.%d x MaxMult: %d.%d x\n", minmult/10, minmult%10, maxmult/10, maxmult%10); if (fsb == -1) {
@@ -399,9 +458,9 @@ highest_speed = calc_speed(maxmult); lowest_speed = calc_speed(minmult); - dprintk ("FSB:%dMHz Lowest speed: %s Highest speed:%s\n", fsb, - print_speed(lowest_speed/1000), - print_speed(highest_speed/1000)); + printk (KERN_INFO PFX "FSB: %d MHz Lowest speed: %d Highest speed: %d\n", fsb, + lowest_speed/1000, + highest_speed/1000); if (lowest_speed == highest_speed) { printk (KERN_INFO PFX "highestspeed == lowest, aborting.\n");
@@ -467,11 +526,11 @@ } if (vrmrev==0) { - dprintk ("VRM 8.5\n"); + dprintk ("VRM 8.5 \n"); memcpy (voltage_table, vrm85scales, sizeof(voltage_table)); numvscales = (voltage_table[maxvid]-voltage_table[minvid])/25; } else { - dprintk ("Mobile VRM\n"); + dprintk ("Mobile VRM \n"); memcpy (voltage_table, mobilevrmscales, sizeof(voltage_table)); numvscales = (voltage_table[maxvid]-voltage_table[minvid])/5; }
@@ -578,17 +637,17 @@ numscales=32; switch (c->x86_mask) { case 0 ... 1: - cpuname = "C3 'Nehemiah A' [C5N]"; + cpuname = "C3 'Nehemiah A' [C5XLOE]"; memcpy (clock_ratio, nehemiah_a_clock_ratio, sizeof(nehemiah_a_clock_ratio)); memcpy (eblcr_table, nehemiah_a_eblcr, sizeof(nehemiah_a_eblcr)); break; case 2 ... 4: - cpuname = "C3 'Nehemiah B' [C5N]"; + cpuname = "C3 'Nehemiah B' [C5XLOH]"; memcpy (clock_ratio, nehemiah_b_clock_ratio, sizeof(nehemiah_b_clock_ratio)); memcpy (eblcr_table, nehemiah_b_eblcr, sizeof(nehemiah_b_eblcr)); break; case 5 ... 15: - cpuname = "C3 'Nehemiah C' [C5N]"; + cpuname = "C3 'Nehemiah C' [C5P]"; memcpy (clock_ratio, nehemiah_c_clock_ratio, sizeof(nehemiah_c_clock_ratio)); memcpy (eblcr_table, nehemiah_c_eblcr, sizeof(nehemiah_c_eblcr)); break;
_______________________________________________
Cpufreq mailing list
[email protected]
http://lists.linux.org.uk/mailman/listinfo/cpufreq
Quoted 9 lines · Xavier Bachelot
Hi,
VIA recently pretended to have fixed the long-known longhaul bug. I've diff'ed the
longhaul.cfile from kernel tree against their patched version. Result is attached. I didn't tested it and I don't pretend to understand what the patch does, but I though I just post it here in case someone more knowledgeable could kindly take a look.
For reference, here is the link to VIA site :
http://www.viaarena.com/default.aspx?PageID=420&OSID=30&CatID=2800
*sigh*, I've now seen three separate 'fixes' for this driver, all different, and all of them against some ancient version of the driver, which makes creating diffs painful.
I'm in the process of moving house, but once I'm moved into my new place, putting my via machines back in working order and getting this driver ship-shape again is pretty high on my todo list.
Dave
Signature · 1 line
http://www.codemonkey.org.uk
Quoted 15 lines · Dave Jones
Quoted 9 lines · Xavier Bachelot
Hi,
VIA recently pretended to have fixed the long-known longhaul bug. I've diff'ed the
longhaul.cfile from kernel tree against their patched version. Result is attached. I didn't tested it and I don't pretend to understand what the patch does, but I though I just post it here in case someone more knowledgeable could kindly take a look.
For reference, here is the link to VIA site :
http://www.viaarena.com/default.aspx?PageID=420&OSID=30&CatID=2800*sigh*, I've now seen three separate 'fixes' for this driver, all different, and all of them against some ancient version of the driver, which makes creating diffs painful.
Quoted 6 lines
I'm in the process of moving house, but once I'm moved into my new place, putting my via machines back in working order and getting this driver ship-shape again is pretty high on my todo list.
Dave
Nice to know it's on your todo list :-) Count me as a beta tester, especially if you plan to push a kernel with longhaul fixes to rawhide. A follow-up on this thread or a note sent to cpufreq ml would be much appreciated, as I'm not tracking rawhide closely though.
Cheers,
Xavier