Skip to contentSkip to conversation

SATA status report updated

DISCUSSION Jeff Garzik 2 participants 3 messages May 15, 2006 libata

lore
Share & tools
lore
#1 lore raw
Quoted 1 line · Jeff Garzik

I've updated the http://linux-ata.org/ status pages with the recent work by Tejun Heo and others.

Thanks for your list, but I'm missing the SATA chipset that our Asus-Boxes got:

0000:00:14.1 IDE interface: ATI Technologies Inc ATI Dual Channel Bus Master PCI IDE Controller (PCI-ID 1002:4349)

Or is this something different like an IDE chipset with included SATA bridges or so?

It is supported through the atiixp ide driver, but only really slow (10mb/s) - the same disks attached to an Intel SATA port give 30-40mb/s.

c'ya
sven

Signature · 2 lines
The Internet treats censorship as a routing problem, and routes around it.
(John Gilmore on http://www.cygnus.com/~gnu/)
#2 lore raw
Quoted 4 lines · Sven-Haegar Koch
Quoted 1 line · Jeff Garzik

I've updated the http://linux-ata.org/ status pages with the recent work by Tejun Heo and others.

Quoted 8 lines

Thanks for your list, but I'm missing the SATA chipset that our Asus-Boxes got:

0000:00:14.1 IDE interface: ATI Technologies Inc ATI Dual Channel Bus Master PCI IDE Controller (PCI-ID 1002:4349)

Or is this something different like an IDE chipset with included SATA bridges or so?

It is supported through the atiixp ide driver, but only really slow (10mb/s) - the same disks attached to an Intel SATA port give 30-40mb/s.

Should be ahci or sata_sil driver?

Jeff