VMCS dump
PATCH 1/1 VMCS dump
Attached is patch for HVM guests (VMX only) that prints VMCS areas for all vcpus. A new hotkey ('v') triggers the dump.
We also print VMCS for current processor when vmenter fails.
-boris
# Add hotkey 'v' to hypervisor monitor to print VMCS areas. # When crashing domain due failed vmenter print processor's VMCS.
Signed-off-by Boris Ostrovsky [email protected]
xen/arch/x86/hvm/vmx/vmcs.c +96 -0
@@ -35,6 +35,7 @@#include <xen/event.h> #include <xen/kernel.h> #include <asm/shadow.h> +#include <xen/keyhandler.h> #if CONFIG_PAGING_LEVELS >=3 #include <asm/shadow_64.h> #endif
@@ -542,6 +543,101 @@ void arch_vmx_do_launch(struct vcpu *v)reset_stack_and_jump (vmx_asm_do_launch); } + +/* Dump a section of VMCS */ +static void print_section (char *header,uint32_t start, +uint32_t end,int incr) +{ +uint32_t addr, j; +unsigned long val; +int code; +char *fmt[4 ] = {"0x%04lx " ,"0x%016lx " ,"0x%08lx " ,"0x%016lx " }; +char *err[4 ] = {"------ " ,"------------------ " , +"---------- " ,"------------------ " }; + +/* Find width of the field (encoded in bits 14:13 of address) */ + code = (start>>13 )&3 ; + +if (header) +printk ("\t %s" , header); + +for (addr=start, j=0 ; addr<=end; addr+=incr, j++) { + +if (!(j&3 )) +printk ("\n\t\t0x%08x: " , addr); + +if (!__vmread (addr, &val)) +printk (fmt[code], val); +else +printk ("%s" , err[code]); + } + +printk ("\n" ); +} + +/* Dump current VMCS */ +void vmcs_dump_vcpu (void ) +{ +print_section ("16-bit Guest-State Fields" ,0x800 ,0x80e ,2 ); +print_section ("16-bit Host-State Fields" ,0xc00 ,0xc0c ,2 ); +print_section ("64-bit Control Fields" ,0x2000 ,0x2013 ,1 ); +print_section ("64-bit Guest-State Fields" ,0x2800 ,0x2803 ,1 ); +print_section ("32-bit Control Fields" ,0x4000 ,0x401c ,2 ); +print_section ("32-bit RO Data Fields" ,0x4400 ,0x440e ,2 ); +print_section ("32-bit Guest-State Fields" ,0x4800 ,0x482a ,2 ); +print_section ("32-bit Host-State Fields" ,0x4c00 ,0x4c00 ,2 ); +print_section ("Natural 64-bit Control Fields" ,0x6000 ,0x600e ,2 ); +print_section ("64-bit RO Data Fields" ,0x6400 ,0x640A ,2 ); +print_section ("Natural 64-bit Guest-State Fields" ,0x6800 ,0x6826 ,2 ); +print_section ("Natural 64-bit Host-State Fields" ,0x6c00 ,0x6c16 ,2 ); +} + + +static void vmcs_dump (unsigned char ch) +{ +struct domain *d; +struct vcpu *v; + +printk ("*********** VMCS Areas **************\n" ); +for_each_domain (d) { +printk ("\n>>> Domain %d <<<\n" , d->domain_id); +for_each_vcpu (d, v) { + +/* +* Presumably, if a domain is not an HVM guest, +* the very first CPU will not pass this test +*/ +if (!hvm_guest (v)) { +printk ("\t\tNot HVM guest\n" ); +break ; + } +printk ("\tVCPU %d\n" , v->vcpu_id); + +if (v != current) { +vcpu_pause (v); +__vmptrld (virt_to_maddr (v->arch.hvm_vmx.vmcs)); + } + +vmcs_dump_vcpu (); + +if (v != current) { +__vmptrld (virt_to_maddr (current->arch.hvm_vmx.vmcs)); +vcpu_unpause (v); + } + } + } + +printk ("**************************************\n" ); +} + +static int __init setup_vmcs_dump (void ) +{ +register_keyhandler ('v' , vmcs_dump,"dump Intel's VMCS" ); +return 0 ; +} + +__initcall (setup_vmcs_dump); +/* * Local variables: * mode: C
xen/arch/x86/hvm/vmx/vmx.c +4 -1
@@ -2082,7 +2082,10 @@ asmlinkage void vmx_vmexit_handler(strucHVM_DBG_LOG (DBG_LEVEL_0 ,"exit reason = %x" , exit_reason);if (exit_reason &VMX_EXIT_REASONS_FAILED_VMENTRY ) { -printk ("Failed vm entry\n" ); +printk ("Failed vm entry (reason 0x%x)\n" , exit_reason); +printk ("*********** VMCS Area **************\n" ); +vmcs_dump_vcpu (); +printk ("**************************************\n" );domain_crash_synchronous ();return ; }
xen/include/asm-x86/hvm/vmx/vmcs.h +1 -1
@@ -26,7 +26,7 @@extern int start_vmx (void );extern void stop_vmx (void ); - +extern void vmcs_dump_vcpu (void );void vmx_final_setup_guest (struct vcpu *v);void vmx_enter_scheduler (void );
_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xensource.com/xen-devel