mpt fusion - move fc event/reset handling to mptfc

@@ -1188,7 +1188,6 @@
 	ioc->pcidev = pdev;
 	ioc->diagPending = 0;
 	spin_lock_init(&ioc->diagLock);
-	spin_lock_init(&ioc->fc_rescan_work_lock);
 	spin_lock_init(&ioc->initializing_hba_lock);
 
 	/* Initialize the event logging.

@@ -1841,14 +1840,6 @@
 			mpt_findImVolumes(ioc);
 
 		} else if (ioc->bus_type == FC) {
-			/*
-			 *  Pre-fetch FC port WWN and stuff...
-			 *  (FCPortPage0_t stuff)
-			 */
-			for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) {
-				(void) mptbase_GetFcPortPage0(ioc, ii);
-			}
-
 			if ((ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) &&
 			    (ioc->lan_cnfg_page0.Header.PageLength == 0)) {
 				/*

@@ -4174,108 +4165,6 @@
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
- *	mptbase_GetFcPortPage0 - Fetch FCPort config Page0.
- *	@ioc: Pointer to MPT_ADAPTER structure
- *	@portnum: IOC Port number
- *
- *	Return: 0 for success
- *	-ENOMEM if no memory available
- *		-EPERM if not allowed due to ISR context
- *		-EAGAIN if no msg frames currently available
- *		-EFAULT for non-successful reply or no reply (timeout)
- */
-int
-mptbase_GetFcPortPage0(MPT_ADAPTER *ioc, int portnum)
-{
-	ConfigPageHeader_t	 hdr;
-	CONFIGPARMS		 cfg;
-	FCPortPage0_t		*ppage0_alloc;
-	FCPortPage0_t		*pp0dest;
-	dma_addr_t		 page0_dma;
-	int			 data_sz;
-	int			 copy_sz;
-	int			 rc;
-	int			 count = 400;
-
-
-	/* Get FCPort Page 0 header */
-	hdr.PageVersion = 0;
-	hdr.PageLength = 0;
-	hdr.PageNumber = 0;
-	hdr.PageType = MPI_CONFIG_PAGETYPE_FC_PORT;
-	cfg.cfghdr.hdr = &hdr;
-	cfg.physAddr = -1;
-	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
-	cfg.dir = 0;
-	cfg.pageAddr = portnum;
-	cfg.timeout = 0;
-
-	if ((rc = mpt_config(ioc, &cfg)) != 0)
-		return rc;
-
-	if (hdr.PageLength == 0)
-		return 0;
-
-	data_sz = hdr.PageLength * 4;
-	rc = -ENOMEM;
-	ppage0_alloc = (FCPortPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma);
-	if (ppage0_alloc) {
-
- try_again:
-		memset((u8 *)ppage0_alloc, 0, data_sz);
-		cfg.physAddr = page0_dma;
-		cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
-
-		if ((rc = mpt_config(ioc, &cfg)) == 0) {
-			/* save the data */
-			pp0dest = &ioc->fc_port_page0[portnum];
-			copy_sz = min_t(int, sizeof(FCPortPage0_t), data_sz);
-			memcpy(pp0dest, ppage0_alloc, copy_sz);
-
-			/*
-			 *	Normalize endianness of structure data,
-			 *	by byte-swapping all > 1 byte fields!
-			 */
-			pp0dest->Flags = le32_to_cpu(pp0dest->Flags);
-			pp0dest->PortIdentifier = le32_to_cpu(pp0dest->PortIdentifier);
-			pp0dest->WWNN.Low = le32_to_cpu(pp0dest->WWNN.Low);
-			pp0dest->WWNN.High = le32_to_cpu(pp0dest->WWNN.High);
-			pp0dest->WWPN.Low = le32_to_cpu(pp0dest->WWPN.Low);
-			pp0dest->WWPN.High = le32_to_cpu(pp0dest->WWPN.High);
-			pp0dest->SupportedServiceClass = le32_to_cpu(pp0dest->SupportedServiceClass);
-			pp0dest->SupportedSpeeds = le32_to_cpu(pp0dest->SupportedSpeeds);
-			pp0dest->CurrentSpeed = le32_to_cpu(pp0dest->CurrentSpeed);
-			pp0dest->MaxFrameSize = le32_to_cpu(pp0dest->MaxFrameSize);
-			pp0dest->FabricWWNN.Low = le32_to_cpu(pp0dest->FabricWWNN.Low);
-			pp0dest->FabricWWNN.High = le32_to_cpu(pp0dest->FabricWWNN.High);
-			pp0dest->FabricWWPN.Low = le32_to_cpu(pp0dest->FabricWWPN.Low);
-			pp0dest->FabricWWPN.High = le32_to_cpu(pp0dest->FabricWWPN.High);
-			pp0dest->DiscoveredPortsCount = le32_to_cpu(pp0dest->DiscoveredPortsCount);
-			pp0dest->MaxInitiators = le32_to_cpu(pp0dest->MaxInitiators);
-
-			/*
-			 * if still doing discovery,
-			 * hang loose a while until finished
-			 */
-			if (pp0dest->PortState == MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN) {
-				if (count-- > 0) {
-					msleep_interruptible(100);
-					goto try_again;
-				}
-				printk(MYIOC_s_INFO_FMT "Firmware discovery not"
-							" complete.\n",
-						ioc->name);
-			}
-		}
-
-		pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma);
-	}
-
-	return rc;
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
  *	mptbase_sas_persist_operation - Perform operation on SAS Persitent Table
  *	@ioc: Pointer to MPT_ADAPTER structure
  *	@sas_address: 64bit SAS Address for operation.

@@ -6483,7 +6372,6 @@
 EXPORT_SYMBOL(mpt_alloc_fw_memory);
 EXPORT_SYMBOL(mpt_free_fw_memory);
 EXPORT_SYMBOL(mptbase_sas_persist_operation);
-EXPORT_SYMBOL(mptbase_GetFcPortPage0);
 
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/

@@ -1027,7 +1027,6 @@
 extern void	 mpt_free_fw_memory(MPT_ADAPTER *ioc);
 extern int	 mpt_findImVolumes(MPT_ADAPTER *ioc);
 extern int	 mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
-extern int	 mptbase_GetFcPortPage0(MPT_ADAPTER *ioc, int portnum);
 
 /*
  *  Public data decl's...

227 lines not on this page · raw message

@@ -2521,18 +2521,6 @@
 			hd->cmdPtr = NULL;
 		}
 
-		/* 7. FC: Rescan for blocked rports which might have returned.
-		 */
-		if (ioc->bus_type == FC) {
-			spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags);
-			if (ioc->fc_rescan_work_q) {
-				if (ioc->fc_rescan_work_count++ == 0) {
-					queue_work(ioc->fc_rescan_work_q,
-						   &ioc->fc_rescan_work);
-				}
-			}
-			spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags);
-		}
 		dtmprintk((MYIOC_s_WARN_FMT "Post-Reset complete.\n", ioc->name));
 
 	}

@@ -2546,7 +2534,6 @@
 {
 	MPT_SCSI_HOST *hd;
 	u8 event = le32_to_cpu(pEvReply->Event) & 0xFF;
-	unsigned long flags;
 
 	devtverboseprintk((MYIOC_s_INFO_FMT "MPT event (=%02Xh) routed to SCSI host driver!\n",
 			ioc->name, event));

@@ -2569,14 +2556,6 @@
 		break;
 
 	case MPI_EVENT_RESCAN:				/* 06 */
-		spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags);
-		if (ioc->fc_rescan_work_q) {
-			if (ioc->fc_rescan_work_count++ == 0) {
-				queue_work(ioc->fc_rescan_work_q,
-					   &ioc->fc_rescan_work);
-			}
-		}
-		spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags);
 		break;
 
 		/*