2.6.17-rc5 - S3 & WOL working

Hi All,

first of all a big thanks to all. I had a big problem to wake my system from S3 via WOL (magig packet). I've installed kernel-2.6.17-rc5 and it seems(*) all problems are gone.
I confirm a working S3 in combination with wake on lan (WOL).
My system is an Abit NF7 with an nVidia 5200. Driver is 'NVIDIA-Linux-x86-1.0-8762-pkg1.run'. NvAGP is set to "1" in xorg.conf, Agpgart is turned on in kernel though. Don't know whether one still need "CONFIG_X86_UP_IOAPIC=y" in kernel config, but if anybody has problems with WOL and S3, this setting seems to help at least one person, as far as I know. Btw. I've never managed to get a Radeon to work with S3 and KDE. Once I saw a very weird method to wake up a Radeon, I decided to buy an nNvidia.

Well, since I don't know the reason why it's working now, my thanks goes to Mr. Unknown.

Thanks again. Regards,

Andreas

--------
P.S. * have still to use this, else system is dead on resume from S3

####ide-acpi-udma6 patch for kernel 2.6.17-rc5####

@@ -1248,7 +1248,8 @@
       rqpm.pm_step = ide_pm_state_start_resume;
       rqpm.pm_state = PM_EVENT_ON;
 
-       return ide_do_drive_cmd(drive, &rq, ide_head_wait);
+       (void) ide_do_drive_cmd(drive, &rq, ide_head_wait);
+       return set_xfer_rate(drive, XFER_UDMA_6);
 

}

#################################