osk5912 boot failure with u-boot 1.1.4
hi,
i compiled u-boot 1.1.4 with ELDK 4.0 and put it to my osk5912. but now my board does not boot anymore. how can i fix this?
if i boot my board with u-boot 1.1.2 there is a conflict with the machine number. the u-boot machine number is 3 and the kernel machine number is 203?? can i change the machine number in u-boot?
regards
martin
______________________________________________________________________
XXL-Speicher, PC-Virenschutz, Spartarife & mehr: Nur im WEB.DE Club! Jetzt gratis testen! http://freemail.web.de/home/landingpad/?mc=021130
Quoted 6 lines · Martin Margraf
hi,
i compiled u-boot 1.1.4 with ELDK 4.0 and put it to my osk5912. but now my board does not boot anymore. how can i fix this?
You need to compile u-boot 1.1.4 using eldk-3.1.1. I have tested it and it works fine.
-------------------------------------------------------DISCLAIMER------------------------------------------------------
The information transmitted herewith is confidential and proprietary information intended only for use by the individual or entity to which it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any review, retransmission, dissemination, distribution, copying or other use of, or taking of any action in reliance upon this information is strictly prohibited. If you have received this communication in error, please contact the sender and delete the material from your computer.
---------------------------------------------------------------------------------------------------------------------------