Skip to contentSkip to conversation

osk5912 boot failure with u-boot 1.1.4

DISCUSSION Martin Margraf 3 participants 3 messages May 31, 2006

lore
Share & tools
lore
#0 lore raw

so, i compiled u-boot 1.1.4 (latest version from ftp://ftp.denx.de/pub/u-boot and with the patches available from http://omap.spectrumdigital.com/osk5912/osk5912_faq.html)
and my 2.6.16.18 kernel with ELDK 3.1.1 and i get the following error.

#OMAP5912 OSK # bootm 0x100000
### Booting image at 00100000 ...

#   Image Name:   Linux Kernel Image
#   Image Type:   ARM Linux Kernel Image (gzip compressed)
#   Data Size:    1155123 Bytes =  1.1 MB
#   Load Address: 10c08000

# Entry Point: 10c08000
# Verifying Checksum ... OK
# Uncompressing Kernel Image ... OK
#
#Starting kernel ...
#
#Uncompressing Linux.............................................................................. done, booting the kernel. #
#Error: unrecognized/unsupported machine ID (r1 = 0x00000003).
#
#Available machine support:
#
#ID (hex) NAME
#00000203 TI-OSK
#
#Please check your kernel config and/or bootloader.

these are the settings i made in the kernel .config:

system core type:
CONFIG_ARCH_OMAP=y
omap core type:
CONFIG_ARCH_OMAP16XX=y
omap board type:
#CONFIG_MACH_OMAP_OSK=y

regards

martin
__________________________________________________________________________
Erweitern Sie FreeMail zu einem noch leistungsstärkeren E-Mail-Postfach! Mehr Infos unter http://freemail.web.de/home/landingpad/?mc=021131

#1 lore raw

Hi Martin,

Quoted 4 lines · Martin Margraf

so, i compiled u-boot 1.1.4 (latest version from ftp://ftp.denx.de/pub/u-boot and with the patches available from
http://omap.spectrumdigital.com/osk5912/osk5912_faq.html) and my 2.6.16.18 kernel with ELDK 3.1.1 and i get the following error.

I think I mentioned this a few times on this list. Please *don't* use any older versions of U-Boot. Even not 1.1.4 release from end of last year. Please use current top-of-git tree version:

http://www.denx.de/en/Software/GIT

I integrated the patches from Spectrumdigital a few weeks ago in this version. For those without git access I attached the OMAP5912OSK binary.

Hope this helps.

Best regards,
Stefan

#2 lore raw
In reply to Martin Margraf
Quoted 5 lines · Martin Margraf

#Error: unrecognized/unsupported machine ID (r1 = 0x00000003).

#00000203 TI-OSK

these are the settings i made in the kernel .config:

Your u-boot passes wrong machine ID to kernel (3, should be 0x203). So your kernel should be correct, but your u-boot seems to be wrong. Looking at

http://www.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=blob;h=6993b136eebbf10cfdf1c678958ab4b6d3162577;hb=392c252efd5d2e67b47ebeb3b7e4f42e7e3d5127;f=board/omap5912osk/omap5912osk.c

recent u-boot passes the correct number if build correctly. Do you really built u-boot with

make omap5912osk_config
make

?

Regards

Dirk