Symlink to Modem Vanishes
slackware 10.2 kernel 2.6.16
Quoted 8 lines · [email protected] indirectly said:
What I needed was a file named 10-local.rules placed in the /sda3/etc/udev/ rules.d subdirectory. All the file needed was the line following:
KERNEL="ttyS0", SYMLINK="modem"
Now the modem node in the /dev directory doesn't vanish anymore.
Will try it on next reboot
It does not work, NAME="/dev/ttyS0" has to be added. However doing this then there are no /dev/ttyS*. Symlink /dev/modem points to a non existing file.
Now I found that /dev/ttyS0 is a symlink to /dev/tts/0. So I changed NAME="/dev/tts/0" with the effect that then there is no /dev/tts/0 but only 1, 2 and 3.
Now I am totally confused and back to rc.local command, ln -s /dev/ttyS0 /dev/modem.
Is there somebody to whom this males sense?
Regards
Signature · 7 lines
Peter - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs
images -> DVD-slideshow ?
Howdy:
What is your suggestion for an application that will convert many (still) images into a DVD slideshow, perhaps with background music? I've been trying to obtain image2mpeg with varying sucess. I was able to get a version downloaded and compiled. I created an image (stream.ppm), but there seems to be no mention of how to get the output file onto a DVD.
If the output DVD <image> is small, can it be placed on a (650-700MB) CDROM and played on a standard DVD player? If yes, how? 'growisofs' balks at writing to my CDROM media.
I am using Slackware v10.2 and understand *.tar.gz.
I am poorer at installing *.rpm, but will try if that is the only offering of another application. *.deb, I don't know.
Regards, Chuck
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Re: images -> DVD-slideshow ?
Quoted 13 lines · chuck gelm
Howdy:
What is your suggestion for an application that will convert many (still) images into a DVD slideshow, perhaps with background music? I've been trying to obtain image2mpeg with varying sucess. I was able to get a version downloaded and compiled. I created an image (stream.ppm), but there seems to be no mention of how to get the output file onto a DVD.
If the output DVD <image> is small, can it be placed on a (650-700MB) CDROM and played on a standard DVD player? If yes, how? 'growisofs' balks at writing to my CDROM media.
Quoted 5 lines
I am using Slackware v10.2 and understand *.tar.gz.
I am poorer at installing *.rpm, but will try if that is the only offering of another application. *.deb, I don't know.Regards, Chuck
I really wish I could make a magic suggestion, as you have
done for me in the past, but my brain is in meltdown mode with this stuff..
I haven't tried slide shows yet still stuck on editing
streaming video with two, partially successful, routes: Linux Video Editor; http://lvempeg.sourceforge.net that compiles and installs under Slack10.2, but I've not, yet, been able to figure out how to actually edit videos, only preview.. It wont work with .avi files, just .vob's that I've converted with videotrans' -M flag.. (You discovered most that led up to this.) It, of course, requires a bazillion libs that, in turn, require more libs.. <grin> LVE has a DVDAuthoring-HOWTO that's interesting referring to many buzz words we're now immersed in.. Of course videotrans can convert to non muxed files; .mp2 and m2v..
Another much more powerful scheme I've installed is cinelerra:
www.cinelerra.org
the heroinewarrior.com version that only installs into FedoraCore 4, but includes all the deps in the 30mB rpm package.. I tried cinelerra tarball but never got it working under Slack10.2.. It's world class and you can do everything with it including washing dishes I think..
It requires a .vob file too and I've been able to do some simple editing but there are still many problems.. Work in progress with both of them of course.. Warp hours per usual.. The blurb says that cinelerra is "professional."
Cinelerra recommends Kino for blokes like me but I got nowhere with it, especially since it's sort of designed for digital camera to editor and back... The various codecs can drive one to drink too.. <g>
There are some tutorials about the diff between tarballs and rpm files and how to convert one scheme to the other.. I can't find it now--so what's new, eh??
Not much help, I know, but, just perhaps it might ring a bell somewhere.. Best..
Signature · 7 lines
Hal - in Terra Alta, WV/US - Slackware GNU/Linux 10.1 (2.4.29) . - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs
Re: images -> DVD-slideshow ?
Quoted 48 lines · Hal MacArgle
Quoted 13 lines · chuck gelm
Howdy:
What is your suggestion for an application that will convert many (still) images into a DVD slideshow, perhaps with background music? I've been trying to obtain image2mpeg with varying sucess. I was able to get a version downloaded and compiled. I created an image (stream.ppm), but there seems to be no mention of how to get the output file onto a DVD.
If the output DVD <image> is small, can it be placed on a (650-700MB) CDROM and played on a standard DVD player? If yes, how? 'growisofs' balks at writing to my CDROM media.
Quoted 5 lines
I am using Slackware v10.2 and understand *.tar.gz.
I am poorer at installing *.rpm, but will try if that is the only offering of another application. *.deb, I don't know.Regards, Chuck
I really wish I could make a magic suggestion, as you have
done for me in the past, but my brain is in meltdown mode with this stuff..I haven't tried slide shows yet still stuck on editing
streaming video with two, partially successful, routes: Linux Video Editor; http://lvempeg.sourceforge.net that compiles and installs under Slack10.2, but I've not, yet, been able to figure out how to actually edit videos, only preview.. It wont work with .avi files, just .vob's that I've converted with videotrans' -M flag.. (You discovered most that led up to this.) It, of course, requires a bazillion libs that, in turn, require more libs.. <grin> LVE has a DVDAuthoring-HOWTO that's interesting referring to many buzz words we're now immersed in.. Of course videotrans can convert to non muxed files; .mp2 and m2v..Another much more powerful scheme I've installed is cinelerra:
www.cinelerra.org
the heroinewarrior.com version that only installs into FedoraCore 4, but includes all the deps in the 30mB rpm package.. I tried cinelerra tarball but never got it working under Slack10.2.. It's world class and you can do everything with it including washing dishes I think..It requires a .vob file too and I've been able to do some simple editing but there are still many problems.. Work in progress with both of them of course.. Warp hours per usual.. The blurb says that cinelerra is "professional."
Quoted 4 lines
Cinelerra recommends Kino for blokes like me but I got nowhere with it, especially since it's sort of designed for digital camera to editor and back... The various codecs can drive one to drink too.. <g>
Lovely, lively,
It was indeed hard to get started.
There is a list on cinelerra where you could get much info.
There is a link to a slackware site on www.cinelerra.org if you do "wget -r -np to that site" you should get most of the dependencies. If you have any problems please email me privately on [email protected] or ask on the cinelerra mailing list.
I have manged to get cinelerra up working (without the bottle);-) And once you get on it then it is like opium.
You cannot get off it again.;-)
It really is pro.
I will have a look at lvempeg.sf.net
It sounds interesting and challenging
There is also a interface for making dvd's but i have not mastered yet. May be in about 1-2 weeks I should be able to help.
Mettavihari
Signature · 11 lines
A saying of the Buddha from: http://metta.lk/ Streaming Dhamma Video from: http://dharmavahini.tv/ The craving of the heedless man grows like a Maluva (all entangling) creeper. He runs hither and thither (from one life to another) like a monkey in the forest looking for fruit. Random Dhammapada Verse 334 - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs
Re: images -> DVD-slideshow ?
Howdy, Fellows:
Thanks for the hints, but 'cinelerra' is much, much more complex than what I want or need. Those suggestions are video editors, movie editors, ...
All I want to do is make a slide show of my still images and put them on a DVD, perhaps with background music, to play on a television DVD player.
Again, thanks,
Chuck
Quoted 50 lines · Bhikkhu Mettavihari
Quoted 43 lines · Hal MacArgle
Quoted 13 lines · chuck gelm
Howdy:
What is your suggestion for an application that will convert many (still) images into a DVD slideshow, perhaps with background music? I've been trying to obtain image2mpeg with varying sucess. I was able to get a version downloaded and compiled. I created an image (stream.ppm), but there seems to be no mention of how to get the output file onto a DVD.
If the output DVD <image> is small, can it be placed on a (650-700MB) CDROM and played on a standard DVD player? If yes, how? 'growisofs' balks at writing to my CDROM media.
Quoted 7 lines
I am using Slackware v10.2 and understand *.tar.gz.
I am poorer at installing *.rpm, but will try if that is the only offering of another application. *.deb, I don't know.Regards, Chuck
I haven't tried slide shows yet still stuck on editing
streaming video with two, partially successful, routes: Linux Video Editor; http://lvempeg.sourceforge.net that compiles and installs under Slack10.2, but I've not, yet, been able to figure out how to actually edit videos, only preview.. It wont work with .avi files, just .vob's that I've converted with videotrans' -M flag.. (You discovered most that led up to this.) It, of course, requires a bazillion libs that, in turn, require more libs.. <grin> LVE has a DVDAuthoring-HOWTO that's interesting referring to many buzz words we're now immersed in.. Of course videotrans can convert to non muxed files; .mp2 and m2v..Another much more powerful scheme I've installed is cinelerra:
www.cinelerra.org
the heroinewarrior.com version that only installs into FedoraCore 4,
but includes all the deps in the 30mB rpm package.. I tried cinelerra tarball but never got it working under Slack10.2.. It's world class
and you can do everything with it including washing dishes I think..The blurb says that cinelerra is "professional."Quoted 4 lines
Cinelerra recommends Kino for blokes like me but I got nowhere with it, especially since it's sort of designed for digital camera to editor and back... The various codecs can drive one to drink too..
Quoted 8 lines
There is a list on cinelerra where you could get much info.
There is a link to a slackware site on www.cinelerra.org It really is pro.
I will have a look at lvempeg.sf.net
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Re: images -> DVD-slideshow ?
In reply to Bhikkhu MettavihariQuoted 7 lines · Hal MacArgle
Quoted 6 lines
Another much more powerful scheme I've installed is cinelerra:
www.cinelerra.org
the heroinewarrior.com version that only installs into FedoraCore 4, but includes all the deps in the 30mB rpm package.. I tried cinelerra tarball but never got it working under Slack10.2..
Update: Compiled, not without some warnings, to Slackware10.2
with the "test26.s" kernel, rather than the default 2.4.31, that failed, previously..
So far it works very well for what I've tried and there have
been no surprises that I experienced with FC4.. My favourite Slackware, to the rescue.. <grin>
Signature · 7 lines
Hal - in Terra Alta, WV/US - Slackware GNU/Linux 10.1 (2.4.29) . - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs
Re: images -> DVD-slideshow ?
In reply to Bhikkhu MettavihariQuoted 8 lines · Bhikkhu Mettavihari
Lovely, lively,
It was indeed hard to get started.
There is a list on cinelerra where you could get much info.There is a link to a slackware site on www.cinelerra.org if you do "wget -r -np to that site" you should get most of the dependencies. If you have any problems please email me privately on [email protected] or ask on the cinelerra mailing list.
Greetings and -- Appreciate!! Will try the above. Thanks..
Let me get some more time with the successfully compiled tarball on Slackware10.2, test26.s kernel.. I'm sure I'll have some queries.. Didn't know there was a list. Missed that.. <grin> I was able to fetch the 300, or so, pages of HTML docs.. Plenty of studying..
Quoted 2 lines
I will have a look at lvempeg.sf.net
It sounds interesting and challenging
Be __very__ interested in hearing if you are able to load a
file into it.. I sure missed something.. Trouble is; cinelerra spoils one though..
Quoted 2 lines
There is also a interface for making dvd's but i have not mastered yet. May be in about 1-2 weeks I should be able to help.
Burning DVD's that play on a stand alone consumer player not
a problem as Chuck and Ray figured out a few weeks ago.. At least from captured .avi files, non edited..
Best,
Signature · 7 lines
Hal - in Terra Alta, WV/US - Slackware GNU/Linux 10.1 (2.4.29) . - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs
Re: images -> DVD-slideshow ?
In reply to chuck gelmQuoted 13 lines · chuck gelm
Howdy:
What is your suggestion for an application that will convert many (still) images into a DVD slideshow, perhaps with background music? I've been trying to obtain image2mpeg with varying sucess. I was able to get a version downloaded and compiled. I created an image (stream.ppm), but there seems to be no mention of how to get the output file onto a DVD.
If the output DVD <image> is small, can it be placed on a (650-700MB) CDROM and played on a standard DVD player? If yes, how? 'growisofs' balks at writing to my CDROM media.
Quoted 5 lines
I am using Slackware v10.2 and understand *.tar.gz.
I am poorer at installing *.rpm, but will try if that is the only offering of another application. *.deb, I don't know.Regards, Chuck
I once had to create the same and decided to use mplayer/mencoder, as i like to automate things if possible.
As a start:
#Create an uncompressed avi-file from all the PNG files in the current directory (fps defines the time)
mencoder mf://*.png -mf w=800:h=600:fps=25:type=png -ovc raw -oac copy -o output.avi
#Now add sound using:
mencoder output.avi -audiofile audio.wav -oac copy -ovc copy -o output_waudio.avi
#and now encode it into a dvd/svcd compliant format using:
13.6.5.1. PAL DVD
mencoder -oac lavc -ovc lavc -of mpeg -mpegopts format=dvd -vf
scale=720:576,\
harddup -srate 48000 -af lavcresample=48000 -lavcopts vcodec=mpeg2video:\
vrc_buf_size=1835:vrc_maxrate=9800:vbitrate=5000:keyint=15:acodec=ac3:\
abitrate=192:aspect=16/9 -ofps 25 \
-o movie.mpg movie.avi
13.6.5.5. PAL SVCD
mencoder -oac lavc -ovc lavc -of mpeg -mpegopts format=xsvcd -vf \ scale=480:576,harddup -srate 44100 -af lavcresample=44100 -lavcopts \ vcodec=mpeg2video:mbd=2:keyint=15:vrc_buf_size=917:vrc_minrate=600:\ vbitrate=2500:vrc_maxrate=2500:acodec=mp2:abitrate=224 -ofps 25 \ -o movie.mpg movie.avi
You need to adjust the filenames as i just copied the stuff from the mencoder manual, which you really should read, it's very interesting and tells a lot of stuff about various video-formats.
Greets, Chris
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 10 lines · On Fri, 02 Jun 2006 14:08:22 +0800 Peter <[email protected]> wrote:
slackware 10.2 kernel 2.6.16
Quoted 6 lines · [email protected] indirectly said:
What I needed was a file named 10-local.rules placed in the /sda3/etc/udev/ rules.d subdirectory. All the file needed was the line following:
KERNEL="ttyS0", SYMLINK="modem"
Now the modem node in the /dev directory doesn't vanish anymore.
Quoted 9 lines
Quoted 1 line
Will try it on next reboot
It does not work, NAME="/dev/ttyS0" has to be added. However doing this then there are no
/dev/ttyS*. Symlink/dev/modempoints to a non existing file.Now I found that
/dev/ttyS0is a symlink to/dev/tts/0. So I changed NAME="/dev/tts/0" with the effect that then there is no/dev/tts/0but only 1, 2 and 3.
I finally solved it, the file /etc/udev/rules.d/10-local.rules reads now:
KERNEL="ttyS0",NAME="tts/0",SYMLINK="modem"
and after reboot this morning:
ls -l /dev/modem
lrwxrwxrwx 1 root root 5 2006-06-03 15:26 /dev/modem -> tts/0
and efax, vbox for which I need the modem mostly work.
Regards
Signature · 6 lines
Peter - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs