Skip to contentSkip to conversation

can not starting kernel

U-Boot-Users cpjzjut 4 participants 4 messages Jun 6, 2006 – Jun 7, 2006

lore
Share & tools
lore

cpjzjut

author
#0 lore raw

uboot can't starting kernel.It likes this,can anyone help me out?

Thank you.

S3C2410 # printenv

bootargs=noinitrd root=/dev/ram init=/linuxrc console=ttyS0

bootcmd=tftp 30008000; bootm 30008000

bootdelay=10

baudrate=115200

ethaddr=08:00:3e:26:0a:5b

ipaddr=10.0.0.110

serverip=10.0.0.155

netmask=255.255.255.0

bootfile="uimage.bin"

stdin=serial

stdout=serial

stderr=serial

Environment size: 283/131068 bytes

S3C2410 # tftp 30008000 uimage.bin

TFTP from server 10.0.0.155; our IP address is 10.0.0.110

Filename 'uimage.bin'.

Load address: 0x30008000

Loading: #################################################################

         #################################################################

         ############

done

Bytes transferred = 723556 (b0a64 hex)

S3C2410 # bootm 30008000

## Booting image at 30008000 ...

Image Name: linux kernel

Created: 2006-06-06 9:05:42 UTC

Image Type: ARM Linux Kernel Image (uncompressed)

Data Size: 723492 Bytes = 706.5 kB

Load Address: 30008000

Entry Point: 30008000

Verifying Checksum ... OK

XIP Kernel Image ... OK

Starting kernel ...

undefined instruction

pc : [<30008008>]    lr : [<33f911b0>]

sp : 33f3fa34 ip : 00000001 fp : 00000002

r10: 30008000 r9 : 33e6ffc8 r8 : 33f33fdc

r7 : 33f93080 r6 : 33f99aa8 r5 : 30008040 r4 : 00000000

r3 : 30008000 r2 : 30000100 r1 : 000000c1 r0 : 33f3fc14

Flags: nZCv IRQs off FIQs off Mode SVC_32

Resetting CPU ...

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20060606/b3793370/attachment.htm

#2 lore raw
In reply to cpjzjut
Quoted 36 lines · cpjzjut

uboot can't starting kernel.It likes this,can anyone help me out?
Thank you.

S3C2410 # printenv
bootargs=noinitrd root=/dev/ram init=/linuxrc console=ttyS0 bootcmd=tftp 30008000; bootm 30008000 bootdelay=10
baudrate=115200
ethaddr=08:00:3e:26:0a:5b
ipaddr=10.0.0.110
serverip=10.0.0.155
netmask=255.255.255.0
bootfile="uimage.bin"
stdin=serial
stdout=serial
stderr=serial

Environment size: 283/131068 bytes

S3C2410 # tftp 30008000 uimage.bin
TFTP from server 10.0.0.155; our IP address is 10.0.0.110 Filename 'uimage.bin'.
Load address: 0x30008000
Loading:
#################################################################

#################################################################

          ############
 done
 Bytes transferred = 723556 (b0a64 hex)
 S3C2410 # bootm 30008000
 ## Booting image at 30008000 ...
    Image Name:   linux kernel
    Created:      2006-06-06   9:05:42 UTC
    Image Type:   ARM Linux Kernel Image (uncompressed)
    Data Size:    723492 Bytes = 706.5 kB
Quoted 5 lines

Load Address: 30008000
Entry Point: 30008000
Verifying Checksum ... OK
XIP Kernel Image ... OK

You are trying to extract your kernel to the same address which it is downloaded to (0x30008000). This will not work, as it will overwrite itself as you try to extract it. You need to either a) change your download address or b) change your load address/entry point. Solution
(a) is most likely the correct answer.

Quoted 11 lines

Starting kernel ...

undefined instruction

 pc : [<30008008>]    lr : [<33f911b0>]
 sp : 33f3fa34  ip : 00000001  fp : 00000002
 r10: 30008000  r9 : 33e6ffc8  r8 : 33f33fdc
 r7 : 33f93080  r6 : 33f99aa8  r5 : 30008040  r4 : 00000000
 r3 : 30008000  r2 : 30000100  r1 : 000000c1  r0 : 33f3fc14
 Flags: nZCv  IRQs off  FIQs off  Mode SVC_32
 Resetting CPU ...
#3 lore raw
Quoted 11 lines · In message <[email protected]> you…
Quoted 11 lines

## Booting image at 30008000 ...

    Image Name:   linux kernel
    Created:      2006-06-06   9:05:42 UTC
    Image Type:   ARM Linux Kernel Image (uncompressed)
    Data Size:    723492 Bytes = 706.5 kB

Load Address: 30008000
Entry Point: 30008000
Verifying Checksum ... OK
XIP Kernel Image ... OK

Quoted 3 lines

You are trying to extract your kernel to the same address which it is downloaded to (0x30008000). This will not work, as it will overwrite itself as you try to extract it. You need to either a) change your

Well, are you sure? The image is marked as XIP, but I have to admit that I don't know what this means on ARM; but there seem to be more things wrong - image size is 706 kB, which would allow for a compressed 2.4 Linux kernel - but AFAIK there was no support for XIP in 2.4 fro ARM, and especially there cannot be any XIP from a compressed image.

I guess the main problem is that this is no plain code but a compressed image despite the header information; and if the load / EP addresses are correct is yet another issue.

Best regards,

Wolfgang Denk

Signature · 5 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If you believe that feeling bad or worrying long enough will change a
past or future event, then you are residing on another planet with  a
different reality system.