Skip to contentSkip to conversation

Using at91 with a different parallel flash request for help

U-Boot-Users Roman Kolesnikov 1 participant 1 message Jun 10, 2006

lore
Share & tools
lore
#0 lore raw

Hello,
I am using a similar to at91rm9200ek board. The board is very similar to that of at91rm9200ek, except that the framebuffer is off and few other minor changes.

I am also using an atmel parallel flash. It is 8 MB = 4M x16 by Atmel at49bv6416c. When I boot u boot 1.1.4 my sdram shows up (all 32MB) but my bank 1 shows 0.

I am reading the board setup files and flash.c, but I am not shure what specifically to look for.

Please advice,
Roman