libata: replace ap->hard_port_no with ap->port_no , take #2

@@ -447,7 +447,7 @@ static void piix_pata_cbl_detect(struct 
 		goto cbl40;
 
 	/* check BIOS cable detect results */
-	mask = ap->hard_port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC;
+	mask = ap->port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC;
 	pci_read_config_byte(pdev, PIIX_IOCFG, &tmp);
 	if ((tmp & mask) == 0)
 		goto cbl40;

@@ -473,7 +473,7 @@ static int piix_pata_prereset(struct ata
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
 
-	if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->hard_port_no])) {
+	if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no])) {
 		ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n");
 		ap->eh_context.i.action &= ~ATA_EH_RESET_MASK;
 		return 0;

@@ -509,7 +509,7 @@ static int piix_sata_prereset(struct ata
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
 	const unsigned int *map = ap->host_set->private_data;
-	int base = 2 * ap->hard_port_no;
+	int base = 2 * ap->port_no;
 	unsigned int present_mask = 0;
 	int port, i;
 	u8 pcs;

@@ -578,7 +578,7 @@ static void piix_set_piomode (struct ata
 	unsigned int pio	= adev->pio_mode - XFER_PIO_0;
 	struct pci_dev *dev	= to_pci_dev(ap->host_set->dev);
 	unsigned int is_slave	= (adev->devno != 0);
-	unsigned int master_port= ap->hard_port_no ? 0x42 : 0x40;
+	unsigned int master_port= ap->port_no ? 0x42 : 0x40;
 	unsigned int slave_port	= 0x44;
 	u16 master_data;
 	u8 slave_data;

@@ -596,10 +596,10 @@ static void piix_set_piomode (struct ata
 		/* enable PPE, IE and TIME */
 		master_data |= 0x0070;
 		pci_read_config_byte(dev, slave_port, &slave_data);
-		slave_data &= (ap->hard_port_no ? 0x0f : 0xf0);
+		slave_data &= (ap->port_no ? 0x0f : 0xf0);
 		slave_data |=
 			(timings[pio][0] << 2) |
-			(timings[pio][1] << (ap->hard_port_no ? 4 : 0));
+			(timings[pio][1] << (ap->port_no ? 4 : 0));
 	} else {
 		master_data &= 0xccf8;
 		/* enable PPE, IE and TIME */

@@ -629,9 +629,9 @@ static void piix_set_dmamode (struct ata
 {
 	unsigned int udma	= adev->dma_mode; /* FIXME: MWDMA too */
 	struct pci_dev *dev	= to_pci_dev(ap->host_set->dev);
-	u8 maslave		= ap->hard_port_no ? 0x42 : 0x40;
+	u8 maslave		= ap->port_no ? 0x42 : 0x40;
 	u8 speed		= udma;
-	unsigned int drive_dn	= (ap->hard_port_no ? 2 : 0) + adev->devno;
+	unsigned int drive_dn	= (ap->port_no ? 2 : 0) + adev->devno;
 	int a_speed		= 3 << (drive_dn * 4);
 	int u_flag		= 1 << drive_dn;
 	int v_flag		= 0x01 << drive_dn;

@@ -5216,7 +5216,6 @@ static void ata_host_init(struct ata_por
 	ap->host_set = host_set;
 	ap->dev = ent->dev;
 	ap->port_no = port_no;
-	ap->hard_port_no = port_no;
 	ap->pio_mask = ent->pio_mask;
 	ap->mwdma_mask = ent->mwdma_mask;
 	ap->udma_mask = ent->udma_mask;

@@ -333,7 +333,6 @@ struct ata_probe_ent {
 	struct scsi_host_template *sht;
 	struct ata_ioports	port[ATA_MAX_PORTS];
 	unsigned int		n_ports;
-	unsigned int		hard_port_no;
 	unsigned int		pio_mask;
 	unsigned int		mwdma_mask;
 	unsigned int		udma_mask;

@@ -484,7 +483,6 @@ struct ata_port {
 	unsigned long		flags;	/* ATA_FLAG_xxx */
 	unsigned int		id;	/* unique id req'd by scsi midlyr */
 	unsigned int		port_no; /* unique port #; from zero */
-	unsigned int		hard_port_no;	/* hardware port #; from zero */
 
 	struct ata_prd		*prd;	 /* our SG list */
 	dma_addr_t		prd_dma; /* and its DMA mapping */