Lost HD Partition
Thanks all!
mount -t ext2 /dev/hda6 /mnt/test
mount: wrong fs type, bad option, bad superblock on /dev/hda6,
missing codepage or other error
Yes I am sure that the partition was formated as ext3, then this does not work according to Chuck since these filesystems depend on the superblock.
Trying Hal's suggestion:
/sbin/e2fsck -b 32768 /dev/hda6
e2fsck 1.38 (30-Jun-2005)/sbin/e2fsck: Invalid argument while trying to open /dev/hda6
The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
/sbin/mke2fs -n /dev/hda6
mke2fs 1.38 (30-Jun-2005)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
244320 inodes, 487966 blocks
24398 blocks (5.00%) reserved for the super user
First data block=0
15 block groups
32768 blocks per group, 32768 fragments per group
16288 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912
Trying these backup superblocks /sbin/e2fsck -b * /dev/hda6, I get with each: Invalid argument while trying to open /dev/hda6
Since apparently the superblock is corrupted and the partion has not been formated since, therefore the data should still be on the disk. So what other alternate superblock can be tried?
Yet
The superblock could not be read or does not describe a correct ext2
filesystem.
It seems I am kind of stuck.
Regards
Peter
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 32 lines · Peter
Trying Hal's suggestion:
/sbin/e2fsck-b 32768/dev/hda6
e2fsck 1.38 (30-Jun-2005)/sbin/e2fsck: Invalid argument while trying to open/dev/hda6The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
/sbin/mke2fs-n/dev/hda6mke2fs 1.38 (30-Jun-2005)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
244320 inodes, 487966 blocks
24398 blocks (5.00%) reserved for the super user
First data block=0
15 block groups
32768 blocks per group, 32768 fragments per group
16288 inodes per group
Superblock backups stored on blocks:32768, 98304, 163840, 229376, 294912Trying these backup superblocks
/sbin/e2fsck-b */dev/hda6, I get with
each: Invalid argument while trying to open/dev/hda6
Quoted 8 lines
Since apparently the superblock is corrupted and the partion has not been formated since, therefore the data should still be on the disk. So what other alternate superblock can be tried?
Yet
The superblock could not be read or does not describe a correct ext2 filesystem.It seems I am kind of stuck.
Bummer.. Really grabbing at straws: What might happen if you
booted the machine with a rescue disk that ran a kernel from RAM then use dd to copy the contents of hda6 to another clean drive fitted, temporarily, in the machine?? Since hda6 is a virtual partition, copying it to a primary partition may work?? Depends on how important that partition is I guess..
If all those superblock backups are corrupted, it seems
nothing would work though.. I don't think 'sfdisk' will help in this case either.. Good Luck..
Signature · 7 lines
Hal - in Terra Alta, WV/US - Slackware GNU/Linux 10.1 (2.4.29) . - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs