Skip to contentSkip to conversation

AMD AM2 Sempron vs. Athlon - Confused

DISCUSSION Marc Perkel 3 participants 3 messages Jun 29, 2006

lore
Share & tools
lore
#0 lore raw

I'm confused and I thought if anyone would know it would be people here.

So - in the AM2 world, what's the difference between Sempron and Athlon processors? I look at the specs and they look really similar. Pricing is even weirder with lower spec Semprons costing more than higher spec Athlons?

And - can Linux kernels run on these new processors and motherboards or is this just too new to mess with?

#1 lore raw
Quoted 4 lines · Marc Perkel

I'm confused and I thought if anyone would know it would be people here.

So - in the AM2 world, what's the difference between Sempron and Athlon processors?

That I'm aware of, Semprons have smaller L2 caches. You want an Athlon.

Quoted 3 lines

I look at the specs and they look really similar. Pricing is even weirder with lower spec Semprons costing more than higher spec Athlons?

I've not seen this, but my understanding is that AMD's PR numbering scheme can't be used to compare between processor lines. i.e., a Sempron 3000+ is not faster than an Athlon 2800+..

Quoted 2 lines

And - can Linux kernels run on these new processors and motherboards or is this just too new to mess with?

Should just work. I've seen Linux booted on an AM2 board, but I don't currently own one.

Signature · 5 lines
Cheers,
Alistair.

Final year Computer Science undergraduate.
1F2 55 South Clerk Street, Edinburgh, UK.
#2 lore raw
In reply to Marc Perkel
Quoted 2 lines · Marc Perkel

And - can Linux kernels run on these new processors and motherboards or is this just too new to mess with?

I have an MSI K9N Ultra 2F mobo here and it does work fine - not counting some kernel warnings such as:

ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
Error attaching device data
Error attaching device data
ACPI: PCI Root Bridge [PCI0] (0000:00)

PCI: Setting latency timer of device 0000:00:0b.0 to 64 pcie_portdrv_probe->Dev[0374:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
PCI: Setting latency timer of device 0000:00:0c.0 to 64 pcie_portdrv_probe->Dev[0374:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
PCI: Setting latency timer of device 0000:00:0d.0 to 64 pcie_portdrv_probe->Dev[0378:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
PCI: Setting latency timer of device 0000:00:0e.0 to 64 pcie_portdrv_probe->Dev[0375:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
PCI: Setting latency timer of device 0000:00:0f.0 to 64 pcie_portdrv_probe->Dev[0377:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability
(apparently about PCI bridges).

Main differences betweem AM2 vs. S939 are that you have to use DDR2 RAM, and AM2s are usually less power hungry (thus cooler).

Signature · 1 line
Krzysztof Halasa