SATA status report updated
Updated the SATA status report(s) found at
http://linux-ata.org/
In particular, I created a matrix of drivers and features, to give people an idea of fine-grained driver status:
http://linux-ata.org/driver-status.html#matrix
As always, comments, questions, and additions are welcome.
Jeff
Quoted 4 lines · Jeff Garzik
Updated the SATA status report(s) found at
http://linux-ata.org/
Quoted 8 lines
In particular, I created a matrix of drivers and features, to give people an idea of fine-grained driver status:
http://linux-ata.org/driver-status.html#matrix
As always, comments, questions, and additions are welcome.
Jeff
Jeff / Tejun,
Great work. If the feedback about reversion issues continues to be as minimal as it currently is it appears you appear to have rolled out a great enhancement with minimal errors introduced. I expect to be using sata/e-sata much more extensively now that this new EH process is in place.
Any practical experience about which PCI controllers and/or enclosures would be best to get if I wanted to use e-Sata and the hotplug/warmplug logic?
I have about 20 computers I would like to be able to plug e-Sata drives into so I could move the drives around as needed.
The computers will be a mix of Linux (2.6.18+) and Windows 2K/XP/2003.
Greg
Signature · 3 lines
Greg Freemyer The Norcross Group Forensics for the 21st Century
Quoted 21 lines · Greg Freemyer
Quoted 4 lines · Jeff Garzik
Updated the SATA status report(s) found at
http://linux-ata.org/Quoted 8 lines
In particular, I created a matrix of drivers and features, to give people an idea of fine-grained driver status:
http://linux-ata.org/driver-status.html#matrix
As always, comments, questions, and additions are welcome.
Jeff
Jeff / Tejun,
Great work. If the feedback about reversion issues continues to be as minimal as it currently is it appears you appear to have rolled out a great enhancement with minimal errors introduced. I expect to be using sata/e-sata much more extensively now that this new EH process is in place.
Quoted 3 lines
Any practical experience about which PCI controllers and/or enclosures would be best to get if I wanted to use e-Sata and the hotplug/warmplug logic?
I primarily work on sil controllers and ICH7R piix/ahci because I have access to the hardware and docs. So, those tend to get new features first and get a lot of testing.
If you're planning on using Port Multiplier, sil3124/32 would be the best bet ATM.
Signature · 1 line
tejun
Quoted 10 lines · Jeff Garzik
Updated the SATA status report(s) found at
http://linux-ata.org/In particular, I created a matrix of drivers and features, to give people an idea of fine-grained driver status:
http://linux-ata.org/driver-status.html#matrix
As always, comments, questions, and additions are welcome.
You mention that the Intel 31244 docs are likely available. They are:
http://www.intel.com/design/storage/manuals/273603.htm
mh
Signature · 1 line
Martin Hicks || [email protected] || PGP/GnuPG: 0x4C7F2BEE