e1000 problems in 2.6.18-rc1-mm1
PPC64 lpar (power4)
Works fine in -git4
(http://test.kernel.org/abat/40893/debug/console.log)
Finds the e1000
Intel(R) PRO/1000 Network Driver - version 7.1.9-k2
Copyright (c) 1999-2006 Intel Corporation.
e1000: 0002:21:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:02:55:d3:37:4a
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
....
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
7[?25l[1A[80C[10D[1;32mdone[m8[?25h eth0 device: Intel Corp. 82545EM Gigabit Ethernet Controller (Copper) (rev 01)
eth0 configuration: eth-id-00:02:55:d3:37:4a
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
eth0 IP address: 9.47.92.101/247[?25l[1A[80C[10D[1;32mdone[m8[?25h tunl0
tunl0 No configuration found for tunl0
7[?25l[1A[80C[10D[1munused[m8[?25hSetting up service network . . . .
. . . . . . . . . . . .7[?25l[80C[10D[1;32mdone[m8[?25h
-----------------------------------------------
In -mm1 it seems to not find the e1000:
(http://test.kernel.org/abat/40934/debug/console.log)
Intel(R) PRO/1000 Network Driver - version 7.1.9-k2
Copyright (c) 1999-2006 Intel Corporation.
e1000: 0002:21:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:02:55:d3:37:4a
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
...
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/87[?25l[1A[80C[10D[1;32mdone[m8[?25h eth0
eth0 No configuration found for eth0
7[?25l[1A[80C[10D[1munused[m8[?25h tunl0
tunl0 No configuration found for tunl0
7[?25l[1A[80C[10D[1munused[m8[?25hWaiting for mandatory devices: eth-id-00:02:55:d3:37:4a 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
eth-id-00:02:55:d3:37:4a No interface found
7[?25l[1A[80C[10D[1;31mfailed[m8[?25hSetting up service network . . .
. . . . . . . . . . . . .7[?25l[80C[10D[1;31mfailed[m8[?25h
Quoted 48 lines · On Wed, 12 Jul 2006 10:11:26 -0700 Martin Bligh wrote:
PPC64 lpar (power4)
Works fine in -git4
(http://test.kernel.org/abat/40893/debug/console.log)
Finds the e1000Intel(R) PRO/1000 Network Driver - version 7.1.9-k2
Copyright (c) 1999-2006 Intel Corporation.
e1000: 0002:21:01.0:e1000_probe: (PCI-X:133MHz:64-bit) 00:02:55:d3:37:4a
e1000: eth0:e1000_probe: Intel(R) PRO/1000 Network Connection....
Setting up network interfaces:
lo lo IP address: 127.0.0.1/8 7[?25l[1A[80C[10D[1;32mdone[m8[?25h eth0 device: Intel Corp. 82545EM Gigabit Ethernet Controller (Copper) (rev 01) eth0 configuration: eth-id-00:02:55:d3:37:4a e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex eth0 IP address: 9.47.92.101/247[?25l[1A[80C[10D[1;32mdone[m8[?25h tunl0
tunl0 No configuration found for tunl0
7[?25l[1A[80C[10D[1munused[m8[?25hSetting up service network . . . .
. . . . . . . . . . . .7[?25l[80C[10D[1;32mdone[m8[?25h-----------------------------------------------
In -mm1 it seems to not find the e1000:
(http://test.kernel.org/abat/40934/debug/console.log)Intel(R) PRO/1000 Network Driver - version 7.1.9-k2
Copyright (c) 1999-2006 Intel Corporation.
e1000: 0002:21:01.0:e1000_probe: (PCI-X:133MHz:64-bit) 00:02:55:d3:37:4a
e1000: eth0:e1000_probe: Intel(R) PRO/1000 Network Connection...
Setting up network interfaces:
lo lo IP address: 127.0.0.1/87[?25l[1A[80C[10D[1;32mdone[m8[?25h eth0
eth0 No configuration found for eth0
7[?25l[1A[80C[10D[1munused[m8[?25h tunl0
tunl0 No configuration found for tunl0
7[?25l[1A[80C[10D[1munused[m8[?25hWaiting for mandatory devices:
eth-id-00:02:55:d3:37:4a
19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Quoted 4 lines
eth-id-00:02:55:d3:37:4a No interface found7[?25l[1A[80C[10D[1;31mfailed[m8[?25hSetting up service network . . .
. . . . . . . . . . . . .7[?25l[80C[10D[1;31mfailed[m8[?25h
-
lkml thread:
Subject: Re: 2.6.18-rc1-mm1: /sys/class/net/ethN becoming symlink befuddled /sbin/ifup
akpm's answer:
I'd be suspecting ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.18-rc1/2.6.18-rc1-mm1/broken-out/gregkh-driver-network-class_device-to-device.patch.
already confirmed:
Yeah, that and gregkh-driver-class_device_rename-remove.patch brought it back to reality.
---
~Randy