Generic LOGO support
PATCH 1/1 Generic LOGO support
Hello,
here a patch to allow several boards to define their own LOGO file.
At configuration time we can specify the LOGO file as follow:
wwpc1000_config : unconfig
@ >include/config.h
@echo "#define CONFIG_WWPC1000 100" >>include/config.h
@./mkconfig -a wwpc1000 mips mips wwpc1000
@echo "CROSS_COMPILE = mipsel-linux-" >>include/config.mk
@echo "LOGO = wwpc1000.bmp" >>include/config.mkCiao,
Rodolfo
Signature · 5 lines
GNU/Linux Solutions e-mail: giometti at enneenne.com Linux Device Driver giometti at gnudd.com Embedded Systems giometti at linux.it UNIX programming phone: +39 349 2432127 -------------- next part --------------
Makefile +1 -1
@@ -52,7 +52,7 @@ export TOPDIR ifeq (include/config.mk,$(wildcard include/config.mk)) # load ARCH, BOARD, and CPU configuration include include/config.mk -export ARCH CPU BOARD VENDOR SOC +export ARCH CPU BOARD VENDOR SOC LOGO ifndef CROSS_COMPILE ifeq ($(HOSTARCH),ppc) CROSS_COMPILE =
tools/Makefile +6 -4
@@ -38,8 +38,10 @@ #endif LOGO_H = $(TOPDIR)/include/bmp_logo.h -ifeq ($(LOGO_BMP),) -LOGO_BMP= logos/denx.bmp +ifeq ($(LOGO),) +LOGO_BMP= denx.bmp +else +LOGO_BMP= $(LOGO) endif #-------------------------------------------------------------------------
@@ -195,8 +197,8 @@ crc32.c: @rm -f crc32.c ln -s ../lib_generic/crc32.c crc32.c -$(LOGO_H): bmp_logo $(LOGO_BMP) - ./bmp_logo $(LOGO_BMP) >$@ +$(LOGO_H): bmp_logo logos/$(LOGO_BMP) + ./bmp_logo logos/$(LOGO_BMP) >$@ 2>/tmp/gu #########################################################################
PATCH 1/1 Generic LOGO support
Quoted 3 lines · Rodolfo Giometti
Hello,
here a patch to allow several boards to define their own LOGO file.
Sorry... the patch is wrong... here the correction.
tools/Makefile +1 -1
@@ -198,7 +198,7 @@ crc32.c: ln -s ../lib_generic/crc32.c crc32.c $(LOGO_H): bmp_logo logos/$(LOGO_BMP) - ./bmp_logo logos/$(LOGO_BMP) >$@ 2>/tmp/gu + ./bmp_logo logos/$(LOGO_BMP) >$@
Ciao,
Rodolfo
Signature · 4 lines
GNU/Linux Solutions e-mail: giometti at enneenne.com Linux Device Driver giometti at gnudd.com Embedded Systems giometti at linux.it UNIX programming phone: +39 349 2432127
PATCH 1/1 Generic LOGO support
Quoted 2 lines · In message <[email protected]> you wrote:
Sorry... the patch is wrong... here the correction.
May I ask you to debug and test your patches BEFORE posting, please? Thanks.
And then don't send bits and pieces of corrections, please repost a sane patch instead.
Best regards,
Wolfgang Denk
Signature · 4 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Ordnung ist die Lust der Vernunft,
aber Unordnung die Wonne der Phantasie - Paul ClaudelPATCH 1/1 Generic LOGO support
Quoted 3 lines · Wolfgang Denk
May I ask you to debug and test your patches BEFORE posting, please? Thanks.
Of course I did it, but... :)
Quoted 2 lines
And then don't send bits and pieces of corrections, please repost a sane patch instead.
Ok, attached.
Ciao,
Rodolfo
Signature · 5 lines
GNU/Linux Solutions e-mail: giometti at enneenne.com Linux Device Driver giometti at gnudd.com Embedded Systems giometti at linux.it UNIX programming phone: +39 349 2432127 -------------- next part --------------
Makefile +1 -1
@@ -52,7 +52,7 @@ export TOPDIR ifeq (include/config.mk,$(wildcard include/config.mk)) # load ARCH, BOARD, and CPU configuration include include/config.mk -export ARCH CPU BOARD VENDOR SOC +export ARCH CPU BOARD VENDOR SOC LOGO ifndef CROSS_COMPILE ifeq ($(HOSTARCH),ppc) CROSS_COMPILE =
tools/Makefile +6 -4
@@ -38,8 +38,10 @@ #endif LOGO_H = $(TOPDIR)/include/bmp_logo.h -ifeq ($(LOGO_BMP),) -LOGO_BMP= logos/denx.bmp +ifeq ($(LOGO),) +LOGO_BMP= denx.bmp +else +LOGO_BMP= $(LOGO) endif #-------------------------------------------------------------------------
@@ -195,8 +197,8 @@ crc32.c: @rm -f crc32.c ln -s ../lib_generic/crc32.c crc32.c -$(LOGO_H): bmp_logo $(LOGO_BMP) - ./bmp_logo $(LOGO_BMP) >$@ +$(LOGO_H): bmp_logo logos/$(LOGO_BMP) + ./bmp_logo logos/$(LOGO_BMP) >$@ #########################################################################
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: Digital signature
Url : http://lists.denx.de/pipermail/u-boot/attachments/20060713/65e55afd/attachment.pgp
PATCH 1/1 Generic LOGO support
Quoted 5 lines · In message <[email protected]> you wrote:
Quoted 3 lines
And then don't send bits and pieces of corrections, please repost a sane patch instead.
Ok, attached.
Where is the CHANGELOG message, and your Signed-off-by line?
Also, I cannot find any cleanup code for make clen?
Best regards,
Wolfgang Denk
Signature · 4 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Schshschshchsch. -- The Gorn, "Arena", stardate 3046.2
PATCH 1/1 Generic LOGO support
Quoted 2 lines · Wolfgang Denk
Where is the CHANGELOG message, and your Signed-off-by line?
CHANGELOG:
Support for per board logo definition.
NOTE:
At configuration time we can specify the LOGO file as follow:
wwpc1000_config : unconfig
@ >include/config.h
@echo "#define CONFIG_WWPC1000 100" >>include/config.h
@./mkconfig -a wwpc1000 mips mips wwpc1000
@echo "CROSS_COMPILE = mipsel-linux-" >>include/config.mk
@echo "LOGO = wwpc1000.bmp" >>include/config.mkQuoted 1 line
Also, I cannot find any cleanup code for make clen?
What do you mean? My patch doesn't change file "include/bmp_logo.h" generation... maybe there is a previous bug during "make clean"? I'll check it.
Ciao,
Rodolfo
Signature · 11 lines
GNU/Linux Solutions e-mail: giometti at enneenne.com Linux Device Driver giometti at gnudd.com Embedded Systems giometti at linux.it UNIX programming phone: +39 349 2432127 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: Digital signature Url : http://lists.denx.de/pipermail/u-boot/attachments/20060713/b5bbf93b/attachment.pgp
[U-Boot-Users] Does the UBoot-1.1.4 support the RMII on PPC440GP?
In reply to Wolfgang DenkI still failed to bring up my ethernet on my custom PPC440GP board,
1. auto-negotiations timeout
2. wrong speed(10M), and wrong mode (half duplex)
Can anyone tell me how the drivers for PPC440GP RMII interface goes, thanks a lot!
Below is my logs:
u-boot => tftp 0x100000 tmp.img
Trying ppc_4xx_eth0
the ZMII_FER = 0xe0000780
the ZMII_SSR = 0xe0000784
Waiting for PHY auto negotiation to complete..... TIMEOUT !
done
ENET Speed is 10 Mbps - HALF duplex connection
Using ppc_4xx_eth0 device
TFTP from server 192.168.65.235; our IP address is 192.168.65.239 Filename 'tmp.img'.
Load address: 0x100000
Loading: T T T T T T T
Thanks in advance!
- Denny
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20060713/bd51fc77/attachment.htm