Skip to contentSkip to conversation

Patch approvation procedure

U-Boot-Users Marco Cavallini 3 participants 6 messages Jul 14, 2006 – Jul 19, 2006

lore
Share & tools
lore
#0 lore raw

Hi,
Just for curiosity I'd like to know (and understand) what is the patch approvation procedure.
For example I posted a PXA270 MAINSTONE patch on 9/3/06 and then Wolfgang added it with the new system on 1/4/06 [DNX#2006040142000295] Which are the requirements for approvation and subsequent insertion in the development tree ?
TIA

Signature · 5 lines
Marco Cavallini
Koan s.a.s. - Bergamo - ITALIA
Embedded and Real-Time Software Engineering
Tel. +39-(0)35-255.235 - Fax +39-178-223.9748
www.KoanSoftware.com   |    www.KaeilOS.com
#1 lore raw
Quoted 3 lines · In message <[email protected]> you wrote:

Just for curiosity I'd like to know (and understand) what is the patch approvation procedure.

There is no formal procedure, I'm afraid. We just work on this as time permits.

Quoted 4 lines

For example I posted a PXA270 MAINSTONE patch on 9/3/06 and then Wolfgang added it with the new system on 1/4/06 [DNX#2006040142000295] Which are the requirements for approvation and subsequent insertion in the development tree ?

There is only one requirement: free time for this type of work - free time for me or one of the other guys (Stefan, Heiko) who do this.

Best regards,

Wolfgang Denk

Signature · 3 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A list is only as strong as its weakest link.            -- Don Knuth
#2 lore raw

[U-Boot-Users] When copy whole u-boot to new directory, it's shows some error!

Mr. Wolfgang
I do with these steps, it shows some error like this:
1) Build a config successful
2) Then Copy whole u-boot directory to a diferrent directory, and remove old directory.
3) make clean
4) make some_config
5) make dep
6) make
./bmp_logo logos/denx.bmp

Quoted 1 line

/home/mqy/LinuxDEV/mg-filesystem/u-boot/include/bmp_logo.h

make[1]: Leaving directory `/home/mqy/LinuxDEV/mg-filesystem/u-boot/tools' make -C examples all
make[1]: Entering directory `/home/mqy/LinuxDEV/mg-filesystem/u-boot/examples'
make[1]: *** no rule can build ?hello_world.o? need ? /home/mqy/LinuxDEV/AT9200/DataFlash-Ver/u-boot/include/common.h? stopped make[1]: Leaving directory `/home/mqy/LinuxDEV/mg-filesystem/u-boot/examples'
make: *** [examples] error 2

And I checked the error directory's .depend file, it shows that the
common.h reference to old
directory, it looks like that "make clean" or "make unconfig" can't fix it.
After I add a new command in the "clean" section of "Makefile", and
repeat once again, it's all
ok!
This is the command:
rm -rf find ./ -name .depend

Cordially,
KylongMu

#3 lore raw

[U-Boot-Users] When copy whole u-boot to new directory, it's shows some error!

Quoted 6 lines · In message <[email protected]> you wrote:

I do with these steps, it shows some error like this:
1) Build a config successful
2) Then Copy whole u-boot directory to a diferrent directory, and remove old directory.
3) make clean

Why don't you perform the steps exactly as documented in the manual?

See http://www.denx.de/wiki/view/DULG/UBootConfiguration

Wow. Today is a real "RTFM" day, it seems :-(

Best regards,

Wolfgang Denk

Signature · 3 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"The whole world is about three drinks behind."     - Humphrey Bogart
#4 lore raw

[U-Boot-Users] When copy whole u-boot to new directory, it's shows some error

Quoted 4 lines

From: Wolfgang Denk <[email protected]>
To: "Kylong Mu" <[email protected]>
CC: U-Boot-Users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] When copy whole u-boot to new directory,it's

shows some error!

Quoted 7 lines

Date: Wed, 19 Jul 2006 17:35:18 +0200

Quoted 4 lines · In message <[email protected]> you wrote:

I do with these steps, it shows some error like this:
1) Build a config successful
2) Then Copy whole u-boot directory to a diferrent directory, and

remove

Quoted 10 lines
Quoted 2 lines

old directory.
3) make clean

Why don't you perform the steps exactly as documented in the manual?

See http://www.denx.de/wiki/view/DULG/UBootConfiguration

Wow. Today is a real "RTFM" day, it seems :-(

Sorry for make it with diferrent way, I'm just want try to add my board
configs and
see how uboot's makefile works.

Cordially,
KylongMu

#5 lore raw

[U-Boot-Users] When copy whole u-boot to new directory, it's shows some error

Quoted 4 lines · In message <[email protected]> you wrote:

Sorry for make it with diferrent way, I'm just want try to add my board
configs and
see how uboot's makefile works.

This is no reason for not following the instructions in the manual - and then complaining if it doesn't work.

Doctor, it hurts when I poke into my eye with a spoon. Don't do it, then!

Best regards,

Wolfgang Denk

Signature · 3 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Sorry, but my karma just ran over your dogma.