trying to "brute-force" my RAID 5...
Quoted 16 lines · Neil Brown
Quoted 9 lines
I have written some posts about this before... My 6 disk RAID 5 broke down because of hardware failure. When I tried to get it up'n'running again I did a --create without any missing disk, which made it rebuild. I have also lost all information about how the old RAID was set up..
I got a friend of mine to make a list of all the 6^6 combinations of dev 1 2 3 4 5 missing, and set it up this way :
Quoted 6 lines
"mdadm --create -n 6 -l 5 dev1 2 3 4 5 missing ; fdisk -l
/dev/md0; mdadm --stop/dev/md0" .
But a "cat logfile | grep Linux" of the output of this script tells me that on no of these combination does it find a valid "type 83" partition.shouldn't this work ???
Quoted 8 lines
No.
What are you expecting fdisk to tell you? fdisk lists partitions and I suspect you didn't have any partitions on
/dev/md0
More likely you want something like
fsck -n -f/dev/md0and see which one produces the least noise.
They all produce
"Bad magic number in super-block while trying to open /dev/md0" .
I tried file -s /dev/md0 also, and with one of the disk as first disk I got "ext 3 filedata (needs journal recovery) (errors)" .
but as fsck -n -f can't do anything with it, there might not be any hope ?
Or can it still be that I have some wrong setting?
Chunk size is (and was) default 64k, yes?
Sevrin
Quoted 2 lines · Sevrin Robstad
I tried file -s
/dev/md0also, and with one of the disk as first disk I got "ext 3 filedata (needs journal recovery) (errors)" .
Congratulations, you have found your first disk. Does fsck still complain about the magic number?