Skip to contentSkip to conversation

And another Oops / BUG? (2.6.17.8 on VIA Epia CL6000)

DISCUSSION Udo van den Heuvel 2 participants 4 messages Aug 16, 2006 – Aug 20, 2006

lore
Share & tools
lore
#0 lore raw

Hello,

Again my CL6000 Oopsed.
Again named was involved.
Again I cannot locate the cause.
The log is below as it was pushed through ksymoops, providing a map and vlinux file.

How can I proceed to find the cause?

Kidn regards,
Udo

Aug 16 04:05:35 epia kernel: BUG: unable to handle kernel paging request
at virtual address 4e2aad0b
Aug 16 04:05:35 epia kernel:  printing eip:
Aug 16 04:05:35 epia kernel: 4e2aad0b
Aug 16 04:05:35 epia kernel: *pde = 17493067
Aug 16 04:05:35 epia kernel: *pte = 00000000
Aug 16 04:05:35 epia kernel: Oops: 0000 [#1]
Aug 16 04:05:35 epia kernel: PREEMPT
Aug 16 04:05:35 epia kernel: Modules linked in: vfat fat sg usb_storage

scsi_mod ub sch_tbf xt_string xt_MARK xt_length xt_tcpmss xt_mac xt_mark vt1211 hwmon_vid i2c_isa ipv6 ipt_ttl ipt_owner ip_nat_irc ip_conntrack_irc ipt_REDIRECT ipt_tos ip_nat_ftp ip_conntrack_ftp ip_nat_h323 ip_conntrack_h323 ipt_MASQUERADE ipt_LOG ipt_TCPMSS ipt_REJECT xt_limit xt_state ipt_TARPIT iptable_filter ipt_TOS iptable_mangle xt_NOTRACK iptable_raw binfmt_misc lp parport_pc parport nvram ehci_hcd snd_via82xx snd_ac97_codec snd_ac97_bus uhci_hcd snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd i2c_viapro

Aug 16 04:05:35 epia kernel: CPU:    0
Aug 16 04:05:35 epia kernel: EIP:
0060:[phys_startup_32+1310371083/-1073741824]    Not tainted VLI
Aug 16 04:05:35 epia kernel: EIP:    0060:[<4e2aad0b>]    Not tainted VLI
Aug 16 04:05:35 epia kernel: EFLAGS: 00010296   (2.6.17.8 #12)
Aug 16 04:05:35 epia kernel: EIP is at 0x4e2aad0b
Aug 16 04:05:35 epia kernel: eax: 00000000   ebx: 93bf9812   ecx:
0000000d   edx: 00000001
Aug 16 04:05:35 epia kernel: esi: 881a4646   edi: 28462d61   ebp:
5264e26e   esp: dbf2ff28
Aug 16 04:05:35 epia kernel: ds: 007b   es: 007b   ss: 0068
Aug 16 04:05:35 epia kernel: Process named (pid: 1613,
threadinfo=dbf2e000 task=ddf49a70)
Aug 16 04:05:35 epia kernel: Stack: a8eeb915 ac5f96d2 a6a7fa48 07747a07
2e8a8f29 0b278443 f4d0058f 5ddb9729
Aug 16 04:05:35 epia kernel:        e5192a07 f5a4118b 0c192206 1735c0fb
f5e9cf9a f49cf89e a781aef5 8ed4bd64
Aug 16 04:05:35 epia kernel:        3a730230 b41b1fcf f03ef9a4 a23392c2
ee21f54a 1136953c c5eb4177 59fc2579
Aug 16 04:05:36 epia kernel: Call Trace:
Reading Oops report from the terminal
Aug 16 04:05:35 epia kernel: BUG: unable to handle kernel paging request
at virtual address 4e2aad0bAug 16 04:05:36 epia kernel:  <c0103675>
show_stack_log_lvl+0x85/0x90  <c010380b> show_registers+0x14b/0x1c0
Aug 16 04:05:36 epia kernel:  <c01039e2> die+0x162/0x240  <c010f7d1>
do_page_fault+0x441/0x524
Aug 16 04:05:36 epia kernel:  <c010308f> error_code+0x4f/0x60
Aug 16 04:05:36 epia kernel: Code:  Bad EIP value.
Aug 16 04:05:36 epia kernel: EIP:
[phys_startup_32+1310371083/-1073741824] 0x4e2aad0b SS:ESP 0068:dbf2ff28
Aug 16 04:05:36 epia kernel: EIP: [<4e2aad0b>] 0x4e2aad0b SS:ESP

0068:dbf2ff28

Aug 16 04:05:35 epia kernel: 4e2aad0b
Aug 16 04:05:35 epia kernel: *pde = 17493067
Aug 16 04:05:35 epia kernel: Oops: 0000 [#1]
Aug 16 04:05:35 epia kernel: CPU:    0
Aug 16 04:05:35 epia kernel: EIP:
0060:[phys_startup_32+1310371083/-1073741824]    Not tainted VLI
Aug 16 04:05:35 epia kernel: EIP:    0060:[<4e2aad0b>]    Not tainted VLI
Using defaults from ksymoops -t elf32-i386 -a i386
Aug 16 04:05:35 epia kernel: EFLAGS: 00010296   (2.6.17.8 #12)
Aug 16 04:05:35 epia kernel: eax: 00000000   ebx: 93bf9812   ecx:
0000000d   edx: 00000001
Aug 16 04:05:35 epia kernel: esi: 881a4646   edi: 28462d61   ebp:
5264e26e   esp: dbf2ff28
Aug 16 04:05:35 epia kernel: ds: 007b   es: 007b   ss: 0068
Aug 16 04:05:35 epia kernel: Stack: a8eeb915 ac5f96d2 a6a7fa48 07747a07
2e8a8f29 0b278443 f4d0058f 5ddb9729
Aug 16 04:05:35 epia kernel:        e5192a07 f5a4118b 0c192206 1735c0fb
f5e9cf9a f49cf89e a781aef5 8ed4bd64
Aug 16 04:05:35 epia kernel:        3a730230 b41b1fcf f03ef9a4 a23392c2
ee21f54a 1136953c c5eb4177 59fc2579
Aug 16 04:05:36 epia kernel: Call Trace:
Aug 16 04:05:36 epia kernel:  <c0103675> show_stack_log_lvl+0x85/0x90
<c010380b> show_registers+0x14b/0x1c0
Aug 16 04:05:36 epia kernel:  <c01039e2> die+0x162/0x240  <c010f7d1>
do_page_fault+0x441/0x524
Aug 16 04:05:36 epia kernel:  <c010308f> error_code+0x4f/0x60
Aug 16 04:05:36 epia kernel: Code:  Bad EIP value.
Quoted 7 lines
Quoted 7 lines

EIP; 4e2aad0b <phys_startup_32+4e1aad0b/c0000000> <=====

ebx; 93bf9812 <phys_startup_32+93af9812/c0000000>
esi; 881a4646 <phys_startup_32+880a4646/c0000000>
edi; 28462d61 <phys_startup_32+28362d61/c0000000>
ebp; 5264e26e <phys_startup_32+5254e26e/c0000000>
esp; dbf2ff28 <pg0+1badef28/3fbad400>

Trace; c0103675 <show_stack_log_lvl+85/90>
Trace; c01039e2 <die+162/240>
Trace; c010308f <error_code+4f/60>

Aug 16 04:05:36 epia kernel: EIP:
[phys_startup_32+1310371083/-1073741824] 0x4e2aad0b SS:ESP 0068:dbf2ff28
Aug 16 04:05:36 epia kernel: EIP: [<4e2aad0b>] 0x4e2aad0b SS:ESP

0068:dbf2ff28

#1 lore raw
Quoted 1 line · Udo van den Heuvel

Hello,

Greetings,

Quoted 10 lines

Again my CL6000 Oopsed.
Again named was involved.
Again I cannot locate the cause.
The log is below as it was pushed through ksymoops, providing a map and vlinux file.

How can I proceed to find the cause?

Kidn regards,
Udo

(these oopsen would be a heck of a lot easier to look at if the timestamp junk was stripped off)

Quoted 4 lines
Aug 16 04:05:35 epia kernel: BUG: unable to handle kernel paging request
at virtual address 4e2aad0b
Aug 16 04:05:35 epia kernel:  printing eip:
Aug 16 04:05:35 epia kernel: 4e2aad0b

The oops doesn't help much. Once again, eip is in lala land, not the kernel.

Given that you're the only person posting this kind of explosion, I would cast a very skeptical glance toward my hardware. I'd suggest reverting to a known good kernel first, to verify that you really don't have a hardware problem cropping up.

After I did that, I'd enable stack check thingies under kernel hacking, and if that didn't turn up anything, I'd try slab and page allocator debugging options and hope to catch someone scribbling where they're not supposed to.

-Mike

#2 lore raw
Quoted 7 lines · Mike Galbraith
Quoted 4 lines · Udo van den Heuvel

Again my CL6000 Oopsed.

How can I proceed to find the cause?

(these oopsen would be a heck of a lot easier to look at if the timestamp junk was stripped off)

Will try to do that next time.

Quoted 2 lines

The oops doesn't help much. Once again, eip is in lala land, not the kernel.

Hmm. At least that is consistent, as is the named involvement and the rest of the effects.

Quoted 4 lines

Given that you're the only person posting this kind of explosion, I would cast a very skeptical glance toward my hardware. I'd suggest reverting to a known good kernel first, to verify that you really don't have a hardware problem cropping up.

How long should I run a 2.6.16.* kernel to be sure enough it is not my hardware?

Quoted 4 lines

After I did that, I'd enable stack check thingies under kernel hacking, and if that didn't turn up anything, I'd try slab and page allocator debugging options and hope to catch someone scribbling where they're not supposed to.

OK, will try that.

#3 lore raw
Quoted 8 lines · Udo van den Heuvel
Quoted 4 lines · Mike Galbraith

Given that you're the only person posting this kind of explosion, I would cast a very skeptical glance toward my hardware. I'd suggest reverting to a known good kernel first, to verify that you really don't have a hardware problem cropping up.

How long should I run a 2.6.16.* kernel to be sure enough it is not my hardware?

Hard to say. I'd run it at least twice as long as your longest explosion free interval.

-Mike