Skip to contentSkip to conversation

Problem about LAN/DMZ

DISCUSSION Per Jørgensen 4 participants 5 messages Aug 22, 2006 – Aug 23, 2006

lore
Share & tools
lore
#0 lore raw

Hey Netfilter!
I have been studying netfilter for several days now for building my own firewall. But have ran into a problem and goes like this:
The machine Soekris 4801 Debian Sarge is my firewall
eth0 --> WAN --> Directly connected to the internet
eth1 --> LAN --> 172.16.0.0/24 --> eth1 address 0.1
eth2 --> DMZ --> 172.16.10.0/24 --> eth2 address 10.1
I have installed bind and are running perfectly and NSLOOKUP are showing the coorectly things
In the zone file I have named the servers with their external IP.

The IPTABLES script are an bash file with these rules for:
the interfaces:
lan:
$IPTABLES -A INPUT -i $LAN -m state --state NEW -j ACCEPT dmz:
$IPTABLES -A dmz -m state --state ESTABLISHED,RELATED -j ACCEPT $IPTABLES -A dmz -s $LAN_NET -m state --state NEW -j ACCEPT wan:
$IPTABLES -A wan -m state --state ESTABLISHED,RELATED -j ACCEPT

The connections:
lantowan:
$IPTABLES -A lantowan -s $LAN_NET -j ACCEPT
lantodmz:
$IPTABLES -A lantodmz -s $LAN_NET -j ACCEPT
dmztolan:
$IPTABLES -A dmztolan -o $LAN -m state --state ESTABLISHED,RELATED -j ACCEPT dmztowan:
$IPTABLES -A dmztolan -i $DMZ -o $WAN -p tcp --dport 25 -j ACCEPT
$IPTABLES -A dmztowan -o $WAN -m state --state ESTABLISHED,RELATED -j ACCEPT wantolan:
$IPTABLES -A wantolan -m state --state ESTABLISHED,RELATED -j ACCEPT
wantodmz:
## HTTP ##
$IPTABLES -t nat -A PREROUTING -d $WAN_IP -p tcp --dport 80 -j DNAT --to-destination $ATLANTIS:80 $IPTABLES -A wantodmz -d $ATLANTIS -p tcp --dport 80 -j ACCEPT
## SSH ##
$IPTABLES -t nat -A PREROUTING -d $WAN_IP -p tcp --dport 22 -j DNAT --to-destination $ATLANTIS:22 $IPTABLES -A wantodmz -s $SSH -d $ATLANTIS -p tcp --dport 22 -j ACCEPT
## SMTP ##
$IPTABLES -t nat -A PREROUTING -d $WAN_IP -p tcp --dport 25 -j DNAT --to-destination $ATLANTIS:25 $IPTABLES -A wantodmz -d $ATLANTIS -p tcp --dport 25 -j ACCEPT
## IMAP ##
$IPTABLES -t nat -A PREROUTING -d $WAN_IP -p tcp --dport 143 -j DNAT --to-destination $ATLANTIS:143 $IPTABLES -A wantodmz -d $ATLANTIS -p tcp --dport 143 -j ACCEPT

the masquerade:
$IPTABLES -t nat -A POSTROUTING -s $DMZ_NET -o $WAN -j SNAT --to-source $WAN_IP $IPTABLES -t nat -A POSTROUTING -s $LAN_NET -o $WAN -j SNAT --to-source $WAN_IP

Apending the chains:
$IPTABLES -A INPUT -i $WAN -j wan
$IPTABLES -A INPUT -i $LAN -j lan
$IPTABLES -A INPUT -i $DMZ -j dmz
$IPTABLES -A FORWARD -i $WAN -o $DMZ -j wantodmz
$IPTABLES -A FORWARD -i $WAN -o $LAN -j wantolan
$IPTABLES -A FORWARD -i $DMZ -o $WAN -j dmztowan
$IPTABLES -A FORWARD -i $DMZ -o $LAN -j dmztolan
$IPTABLES -A FORWARD -i $LAN -o $DMZ -j lantodmz
$IPTABLES -A FORWARD -i $LAN -o $WAN -j lantowan

The funny part is that it was working earliere today - And afterwards setting it all up - I did a reboot and deleted the uncommented lines - (And perhaps deleted an role) I have lost the look for where this should be - and hopefully I'll be able to get some help here???? Thanks

Signature · 6 lines
-----------------------------
Med Venlig Hilsen
Per Jørgensen
Stud. datamatiker
Datamatiker udd. CEUS
[email protected]
#1 lore raw
Quoted 66 lines · Per Jørgensen

Hey Netfilter!
I have been studying netfilter for several days now for building my own firewall. But have ran into a problem and goes like this:
The machine Soekris 4801 Debian Sarge is my firewall
eth0 --> WAN --> Directly connected to the internet
eth1 --> LAN --> 172.16.0.0/24 --> eth1 address 0.1
eth2 --> DMZ --> 172.16.10.0/24 --> eth2 address 10.1
I have installed bind and are running perfectly and NSLOOKUP are showing the coorectly things
In the zone file I have named the servers with their external IP.

The IPTABLES script are an bash file with these rules for:
the interfaces:
lan:
$IPTABLES -A INPUT -i $LAN -m state --state NEW -j ACCEPT dmz:
$IPTABLES -A dmz -m state --state ESTABLISHED,RELATED -j ACCEPT $IPTABLES -A dmz -s $LAN_NET -m state --state NEW -j ACCEPT wan:
$IPTABLES -A wan -m state --state ESTABLISHED,RELATED -j ACCEPT

The connections:
lantowan:
$IPTABLES -A lantowan -s $LAN_NET -j ACCEPT
lantodmz:
$IPTABLES -A lantodmz -s $LAN_NET -j ACCEPT
dmztolan:
$IPTABLES -A dmztolan -o $LAN -m state --state ESTABLISHED,RELATED -j ACCEPT dmztowan:
$IPTABLES -A dmztolan -i $DMZ -o $WAN -p tcp --dport 25 -j ACCEPT $IPTABLES -A dmztowan -o $WAN -m state --state ESTABLISHED,RELATED -j ACCEPT wantolan:
$IPTABLES -A wantolan -m state --state ESTABLISHED,RELATED -j ACCEPT wantodmz:
## HTTP ##
$IPTABLES -t nat -A PREROUTING -d $WAN_IP -p tcp --dport 80 -j DNAT --to-destination $ATLANTIS:80
$IPTABLES -A wantodmz -d $ATLANTIS -p tcp --dport 80 -j ACCEPT ## SSH ##
$IPTABLES -t nat -A PREROUTING -d $WAN_IP -p tcp --dport 22 -j DNAT --to-destination $ATLANTIS:22
$IPTABLES -A wantodmz -s $SSH -d $ATLANTIS -p tcp --dport 22 -j ACCEPT ## SMTP ##
$IPTABLES -t nat -A PREROUTING -d $WAN_IP -p tcp --dport 25 -j DNAT --to-destination $ATLANTIS:25
$IPTABLES -A wantodmz -d $ATLANTIS -p tcp --dport 25 -j ACCEPT ## IMAP ##
$IPTABLES -t nat -A PREROUTING -d $WAN_IP -p tcp --dport 143 -j DNAT --to-destination $ATLANTIS:143
$IPTABLES -A wantodmz -d $ATLANTIS -p tcp --dport 143 -j ACCEPT

the masquerade:
$IPTABLES -t nat -A POSTROUTING -s $DMZ_NET -o $WAN -j SNAT --to-source $WAN_IP
$IPTABLES -t nat -A POSTROUTING -s $LAN_NET -o $WAN -j SNAT --to-source $WAN_IP

Apending the chains:
$IPTABLES -A INPUT -i $WAN -j wan
$IPTABLES -A INPUT -i $LAN -j lan
$IPTABLES -A INPUT -i $DMZ -j dmz
$IPTABLES -A FORWARD -i $WAN -o $DMZ -j wantodmz
$IPTABLES -A FORWARD -i $WAN -o $LAN -j wantolan
$IPTABLES -A FORWARD -i $DMZ -o $WAN -j dmztowan
$IPTABLES -A FORWARD -i $DMZ -o $LAN -j dmztolan
$IPTABLES -A FORWARD -i $LAN -o $DMZ -j lantodmz
$IPTABLES -A FORWARD -i $LAN -o $WAN -j lantowan

Quoted 5 lines

The funny part is that it was working earliere today - And afterwards setting it all up - I did a reboot and deleted the uncommented lines
- (And perhaps deleted an role) I have lost the look for where this
should be - and hopefully I'll be able to get some help here????
Thanks

I have reordered and hopefuly repaired your script and added some comments:

#eth0 --> WAN --> Directly connected to the internet #eth1 --> LAN --> 172.16.0.0/24 --> eth1 address 0.1 #eth2 --> DMZ --> 172.16.10.0/24 --> eth2 address 10.1

$IPTABLES -F nat
$IPTABLES -X nat 2>/dev/null

$IPTABLES -F filter
$IPTABLES -X filter 2>/dev/null

$IPTABLES -P nat PREROUTING ACCEPT
$IPTABLES -P nat POSTROUTING ACCEPT
$IPTABLES -P nat OUTPUT ACCEPT

$IPTABLES -P filter INPUT DROP
$IPTABLES -P filter FORWARD DROP
$IPTABLES -P filter OUTPUT ACCEPT

## COMMON ##

$IPTABLES -X connected 2>/dev/null
$IPTABLES -A connected -m state --state ESTABLISHED,RELATED -j ACCEPT

## NAT ##

# PREROUTING #

$IPTABLES -t nat -A PREROUTING -d $WAN_IP -p tcp -m multiport --dports 22,25,80,143 -j DNAT --to-destination $ATLANTIS #$IPTABLES -t nat -A PREROUTING -d $WAN_IP -p tcp --dport 22 -j DNAT --to-destination $ATLANTIS:22 #$IPTABLES -t nat -A PREROUTING -d $WAN_IP -p tcp --dport 25 -j DNAT --to-destination $ATLANTIS:25 #$IPTABLES -t nat -A PREROUTING -d $WAN_IP -p tcp --dport 80 -j DNAT --to-destination $ATLANTIS:80 #$IPTABLES -t nat -A PREROUTING -d $WAN_IP -p tcp --dport 143 -j DNAT --to-destination $ATLANTIS:143

# POSTROUTING #

$IPTABLES -t nat -A POSTROUTING -o $WAN -j SNAT --to-source $WAN_IP #$IPTABLES -t nat -A POSTROUTING -s $DMZ_NET -o $WAN -j SNAT --to-source $WAN_IP #$IPTABLES -t nat -A POSTROUTING -s $LAN_NET -o $WAN -j SNAT --to-source $WAN_IP

## FILTER ##

# INPUT #

$IPTABLES -A INPUT -j connected
$IPTABLES -A INPUT -j ACCEPT ! -i $WAN

#$IPTABLES -A wan -m state --state ESTABLISHED,RELATED -j ACCEPT #$IPTABLES -A INPUT -i $WAN -j wan

#$IPTABLES -A INPUT -i $LAN -m state --state NEW -j ACCEPT #$IPTABLES -A INPUT -i $LAN -j lan

#$IPTABLES -A dmz -m state --state ESTABLISHED,RELATED -j ACCEPT
#$IPTABLES -A dmz -s $LAN_NET -m state --state NEW -j ACCEPT #?????????? Interface=DMZ AND Source=172.16.0.0/24 ???????????? #$IPTABLES -A INPUT -i $DMZ -j dmz

# FORWARD #

$IPTABLES -A FORWARD -j connected

$IPTABLES -X atlantis 2>/dev/null
$IPTABLES -A atlantis
$IPTABLES -A atlantis -p tcp --dport 22 -s $SSH -j ACCEPT $IPTABLES -A atlantis -p tcp --dport 25 -j ACCEPT $IPTABLES -A atlantis -p tcp --dport 80 -j ACCEPT $IPTABLES -A atlantis -p tcp --dport 143 -j ACCEPT $IPTABLES -X wantodmz 2>/dev/null
$IPTABLES -A wantodmz -d $ATLANTIS -j atlantis $IPTABLES -A FORWARD -i $WAN -o $DMZ -j wantodmz

#$IPTABLES -A wantolan -m state --state ESTABLISHED,RELATED -j ACCEPT #$IPTABLES -A FORWARD -i $WAN -o $LAN -j wantolan

#$IPTABLES -A dmztowan -o $WAN -m state --state ESTABLISHED,RELATED -j ACCEPT #$IPTABLES -A FORWARD -i $DMZ -o $WAN -j dmztowan

$IPTABLES -X dmztolan 2>/dev/null
#$IPTABLES -A dmztolan -o $LAN -m state --state ESTABLISHED,RELATED -j ACCEPT
#$IPTABLES -A dmztolan -i $DMZ -o $WAN -p tcp --dport 25 -j ACCEPT # !!!! NEVER GET USED !!!! -o $LAN OR -o $WAN ?????? $IPTABLES -A dmztolan -i $DMZ -p tcp --dport 25 -j ACCEPT # THIS WORKS !!!
$IPTABLES -A FORWARD -i $DMZ -o $LAN -j dmztolan

$IPTABLES -X lantodmz 2>/dev/null
$IPTABLES -A lantodmz -s $LAN_NET -j ACCEPT
$IPTABLES -A FORWARD -i $LAN -o $DMZ -j lantodmz

$IPTABLES -X lantowan 2>/dev/null
$IPTABLES -A lantowan -s $LAN_NET -j ACCEPT
$IPTABLES -A FORWARD -i $LAN -o $WAN -j lantowan

Swifty

#2 lore raw

Gáspár Lajos skrev:

Quoted 166 lines
Quoted 66 lines · Per Jørgensen

Hey Netfilter!
I have been studying netfilter for several days now for building my own firewall. But have ran into a problem and goes like this:
The machine Soekris 4801 Debian Sarge is my firewall
eth0 --> WAN --> Directly connected to the internet
eth1 --> LAN --> 172.16.0.0/24 --> eth1 address 0.1
eth2 --> DMZ --> 172.16.10.0/24 --> eth2 address 10.1
I have installed bind and are running perfectly and NSLOOKUP are showing the coorectly things
In the zone file I have named the servers with their external IP.

The IPTABLES script are an bash file with these rules for:
the interfaces:
lan:
$IPTABLES -A INPUT -i $LAN -m state --state NEW -j ACCEPT dmz:
$IPTABLES -A dmz -m state --state ESTABLISHED,RELATED -j ACCEPT $IPTABLES -A dmz -s $LAN_NET -m state --state NEW -j ACCEPT wan:
$IPTABLES -A wan -m state --state ESTABLISHED,RELATED -j ACCEPT

The connections:
lantowan:
$IPTABLES -A lantowan -s $LAN_NET -j ACCEPT
lantodmz:
$IPTABLES -A lantodmz -s $LAN_NET -j ACCEPT
dmztolan:
$IPTABLES -A dmztolan -o $LAN -m state --state ESTABLISHED,RELATED -j ACCEPT dmztowan:
$IPTABLES -A dmztolan -i $DMZ -o $WAN -p tcp --dport 25 -j ACCEPT $IPTABLES -A dmztowan -o $WAN -m state --state ESTABLISHED,RELATED -j ACCEPT wantolan:
$IPTABLES -A wantolan -m state --state ESTABLISHED,RELATED -j ACCEPT wantodmz:
## HTTP ##
$IPTABLES -t nat -A PREROUTING -d $WAN_IP -p tcp --dport 80 -j DNAT --to-destination $ATLANTIS:80
$IPTABLES -A wantodmz -d $ATLANTIS -p tcp --dport 80 -j ACCEPT ## SSH ##
$IPTABLES -t nat -A PREROUTING -d $WAN_IP -p tcp --dport 22 -j DNAT --to-destination $ATLANTIS:22
$IPTABLES -A wantodmz -s $SSH -d $ATLANTIS -p tcp --dport 22 -j ACCEPT ## SMTP ##
$IPTABLES -t nat -A PREROUTING -d $WAN_IP -p tcp --dport 25 -j DNAT --to-destination $ATLANTIS:25
$IPTABLES -A wantodmz -d $ATLANTIS -p tcp --dport 25 -j ACCEPT ## IMAP ##
$IPTABLES -t nat -A PREROUTING -d $WAN_IP -p tcp --dport 143 -j DNAT --to-destination $ATLANTIS:143
$IPTABLES -A wantodmz -d $ATLANTIS -p tcp --dport 143 -j ACCEPT

the masquerade:
$IPTABLES -t nat -A POSTROUTING -s $DMZ_NET -o $WAN -j SNAT --to-source $WAN_IP
$IPTABLES -t nat -A POSTROUTING -s $LAN_NET -o $WAN -j SNAT --to-source $WAN_IP

Apending the chains:
$IPTABLES -A INPUT -i $WAN -j wan
$IPTABLES -A INPUT -i $LAN -j lan
$IPTABLES -A INPUT -i $DMZ -j dmz
$IPTABLES -A FORWARD -i $WAN -o $DMZ -j wantodmz
$IPTABLES -A FORWARD -i $WAN -o $LAN -j wantolan
$IPTABLES -A FORWARD -i $DMZ -o $WAN -j dmztowan
$IPTABLES -A FORWARD -i $DMZ -o $LAN -j dmztolan
$IPTABLES -A FORWARD -i $LAN -o $DMZ -j lantodmz
$IPTABLES -A FORWARD -i $LAN -o $WAN -j lantowan

Quoted 3 lines

The funny part is that it was working earliere today - And afterwards setting it all up - I did a reboot and deleted the uncommented lines - (And perhaps deleted an role) I have lost the look for where this should be - and hopefully I'll be able to get some help here???? Thanks

I have reordered and hopefuly repaired your script and added some comments:

#eth0 --> WAN --> Directly connected to the internet #eth1 --> LAN --> 172.16.0.0/24 --> eth1 address 0.1 #eth2 --> DMZ --> 172.16.10.0/24 --> eth2 address 10.1

$IPTABLES -F nat
$IPTABLES -X nat 2>/dev/null

$IPTABLES -F filter
$IPTABLES -X filter 2>/dev/null

$IPTABLES -P nat PREROUTING ACCEPT
$IPTABLES -P nat POSTROUTING ACCEPT
$IPTABLES -P nat OUTPUT ACCEPT

$IPTABLES -P filter INPUT DROP
$IPTABLES -P filter FORWARD DROP
$IPTABLES -P filter OUTPUT ACCEPT

## COMMON ##

$IPTABLES -X connected 2>/dev/null
$IPTABLES -A connected -m state --state ESTABLISHED,RELATED -j ACCEPT

## NAT ##

# PREROUTING #

$IPTABLES -t nat -A PREROUTING -d $WAN_IP -p tcp -m multiport --dports 22,25,80,143 -j DNAT --to-destination $ATLANTIS #$IPTABLES -t nat -A PREROUTING -d $WAN_IP -p tcp --dport 22 -j DNAT --to-destination $ATLANTIS:22
#$IPTABLES -t nat -A PREROUTING -d $WAN_IP -p tcp --dport 25 -j DNAT --to-destination $ATLANTIS:25
#$IPTABLES -t nat -A PREROUTING -d $WAN_IP -p tcp --dport 80 -j DNAT --to-destination $ATLANTIS:80
#$IPTABLES -t nat -A PREROUTING -d $WAN_IP -p tcp --dport 143 -j DNAT --to-destination $ATLANTIS:143

# POSTROUTING #

$IPTABLES -t nat -A POSTROUTING -o $WAN -j SNAT --to-source $WAN_IP #$IPTABLES -t nat -A POSTROUTING -s $DMZ_NET -o $WAN -j SNAT --to-source $WAN_IP
#$IPTABLES -t nat -A POSTROUTING -s $LAN_NET -o $WAN -j SNAT --to-source $WAN_IP

## FILTER ##

# INPUT #

$IPTABLES -A INPUT -j connected
$IPTABLES -A INPUT -j ACCEPT ! -i $WAN

#$IPTABLES -A wan -m state --state ESTABLISHED,RELATED -j ACCEPT #$IPTABLES -A INPUT -i $WAN -j wan

#$IPTABLES -A INPUT -i $LAN -m state --state NEW -j ACCEPT #$IPTABLES -A INPUT -i $LAN -j lan

#$IPTABLES -A dmz -m state --state ESTABLISHED,RELATED -j ACCEPT
#$IPTABLES -A dmz -s $LAN_NET -m state --state NEW -j ACCEPT #?????????? Interface=DMZ AND Source=172.16.0.0/24 ???????????? #$IPTABLES -A INPUT -i $DMZ -j dmz

# FORWARD #

$IPTABLES -A FORWARD -j connected

$IPTABLES -X atlantis 2>/dev/null
$IPTABLES -A atlantis
$IPTABLES -A atlantis -p tcp --dport 22 -s $SSH -j ACCEPT $IPTABLES -A atlantis -p tcp --dport 25 -j ACCEPT $IPTABLES -A atlantis -p tcp --dport 80 -j ACCEPT $IPTABLES -A atlantis -p tcp --dport 143 -j ACCEPT $IPTABLES -X wantodmz 2>/dev/null
$IPTABLES -A wantodmz -d $ATLANTIS -j atlantis $IPTABLES -A FORWARD -i $WAN -o $DMZ -j wantodmz

#$IPTABLES -A wantolan -m state --state ESTABLISHED,RELATED -j ACCEPT #$IPTABLES -A FORWARD -i $WAN -o $LAN -j wantolan

#$IPTABLES -A dmztowan -o $WAN -m state --state ESTABLISHED,RELATED -j ACCEPT #$IPTABLES -A FORWARD -i $DMZ -o $WAN -j dmztowan

$IPTABLES -X dmztolan 2>/dev/null
#$IPTABLES -A dmztolan -o $LAN -m state --state ESTABLISHED,RELATED -j ACCEPT
#$IPTABLES -A dmztolan -i $DMZ -o $WAN -p tcp --dport 25 -j ACCEPT # !!!! NEVER GET USED !!!! -o $LAN OR -o $WAN ?????? $IPTABLES -A dmztolan -i $DMZ -p tcp --dport 25 -j ACCEPT # THIS WORKS !!!
$IPTABLES -A FORWARD -i $DMZ -o $LAN -j dmztolan

$IPTABLES -X lantodmz 2>/dev/null
$IPTABLES -A lantodmz -s $LAN_NET -j ACCEPT
$IPTABLES -A FORWARD -i $LAN -o $DMZ -j lantodmz

Quoted 5 lines

$IPTABLES -X lantowan 2>/dev/null
$IPTABLES -A lantowan -s $LAN_NET -j ACCEPT
$IPTABLES -A FORWARD -i $LAN -o $WAN -j lantowan

Swifty

Thanks Swifty!
As I can see from your writing there´s still a lot of rewriting still for mee to do! I will try your script when I come home from school!

I added following line in my script late last night and got it to work. $IPTABLES -t nat -A POSTROUTING -s $LAN_NET -d $ATLANTIS -j SNAT --to $WAN_IP

But still I can see that there´s a lot to learn still for me - Good for me I have now ordered the book from O´reilly Thanks
Per Jørgensen

#3 lore raw

P-O-M - cvs server down?

In reply to Per Jørgensen

Hi,

Is the cvs server down? From two machines on different ISP's (one in Canada and the other in Columbia) I've tried to check out netfilter in order to run P-O-M and I'm getting 'connection refused' I can ping 'pserver.netfilter.org' which leads me to believe the cvs server isn't running:

% cvs -d :pserver:[email protected]:/cvspublic login Logging in to :pserver:[email protected]:2401/cvspublic CVS password:
cvs [login aborted]: connect to pserver.netfilter.org(213.95.27.115):2401
failed: Connection refused

I'm following the information found on:

http://www.netfilter.org/documentation/HOWTO//netfilter-extensions-HOWTO-2.h
tml#ss2.1

Which worked before. :)

Cheers,
---
Pablo Sanchez - Blueoak Database Engineering, Inc

Ph:    819.459.1926          Toll free:  888.459.1926
Cell:  819.918.9731                Pgr:  [email protected]
Fax:   603.720.7723 (US)
#4 lore raw

RE: P-O-M - cvs server down?

Quoted 16 lines

Hi,

Is the cvs server down? From two machines on different ISP's (one in Canada and the other in Columbia) I've tried to check out netfilter in order to run
P-O-M and I'm getting 'connection refused' I can ping 'pserver.netfilter.org' which leads me to believe the cvs server isn't running:

% cvs -d :pserver:[email protected]:/cvspublic login Logging in to :pserver:[email protected]:2401/cvspublic CVS password:
cvs [login aborted]: connect to pserver.netfilter.org(213.95.27.115):2401
failed: Connection refused

Quoted 6 lines

I'm following the information found on:

http://www.netfilter.org/documentation/HOWTO//netfilter-extens
ions-HOWTO-2.h tml#ss2.1

Which worked before. :)

Netfilter has switched from CVS to SVN.

http://www.netfilter.org/downloads.html#svn

Gr,
Rob