Skip to contentSkip to conversation

Remove default_ldt, and simplify ldt-setting.

PATCH In review Jeremy Fitzhardinge 3 participants 4 messages Aug 24, 2006

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Remove default_ldt, and simplify ldt-setting.

(This is the replacement for kill-default_ldt.patch.)

Remove default_ldt, and simplify ldt-setting.

This patch removes the default_ldt[] array, as it has been unused since iBCS stopped being supported. This means it is now possible to actually set an empty LDT segment.

In order to deal with this, the set_ldt_desc/load_LDT pair has been replaced with a single set_ldt() operation which is responsible for both setting up the LDT descriptor in the GDT, and reloading the LDT register. If there are no LDT entries, the LDT register is loaded with a NULL descriptor.

---

arch/i386/kernel/ldt.c         |    4 ---
arch/i386/kernel/traps.c       |    3 --
include/asm-i386/desc.h        |   50 +++++++++++++++-------------------------
include/asm-i386/mmu_context.h |    4 +--
4 files changed, 22 insertions(+), 39 deletions(-)
arch/i386/kernel/ldt.c +0 -0
diff -r 9d2218382a52 arch/i386/kernel/ldt.c
@@ -160,16 +160,14 @@ static int read_default_ldt(void __user {
	int err;
	unsigned long size;

- void *address;

	err = 0;
-	address = &default_ldt[0];
	size = 5*sizeof(struct desc_struct);
	if (size > bytecount)
		size = bytecount;

	err = size;
-	if (copy_to_user(ptr, address, size))
+	if (clear_user(ptr, size))
		err = -EFAULT;

	return err;
arch/i386/kernel/traps.c +0 -0
diff -r 9d2218382a52 arch/i386/kernel/traps.c
@@ -58,9 +58,6 @@

#include "mach_traps.h"

asmlinkage int system_call(void);
-
-struct desc_struct default_ldt[] = { { 0, 0 }, { 0, 0 }, { 0, 0 },
- { 0, 0 }, { 0, 0 } };

/* Do we ignore FPU interrupts ? */
char ignore_fpu_irq = 0;

include/asm-i386/desc.h +0 -0
diff -r 9d2218382a52 include/asm-i386/desc.h
@@ -33,11 +33,6 @@ static inline struct desc_struct *get_cp
	return (struct desc_struct *)per_cpu(cpu_gdt_descr, cpu).address;
}

-/*
- * This is the ldt that every process will get unless we need
- * something other than this.
- */
-extern struct desc_struct default_ldt[];
extern struct desc_struct idt_table[];
extern void set_intr_gate(unsigned int irq, void * addr);

@@ -65,7 +60,6 @@ static inline void pack_gate(__u32 *a, _
#define DESCTYPE_S 0x10 /* !system */

#define load_TR_desc() __asm__ __volatile__("ltr %w0"::"q" (GDT_ENTRY_TSS*8)) -#define load_LDT_desc() __asm__ __volatile__("lldt %w0"::"q" (GDT_ENTRY_LDT*8))

#define load_gdt(dtr) __asm__ __volatile("lgdt %0"::"m" (*dtr)) #define load_idt(dtr) __asm__ __volatile("lidt %0"::"m" (*dtr)) @@ -115,13 +109,20 @@ static inline void __set_tss_desc(unsign

	write_gdt_entry(get_cpu_gdt_table(cpu), entry, a, b);
}

-static inline void set_ldt_desc(unsigned int cpu, void *addr, unsigned int entries) +static inline void set_ldt(void *addr, unsigned int entries)
{
- __u32 a, b;
- pack_descriptor(&a, &b, (unsigned long)addr,
- entries * sizeof(struct desc_struct) - 1,
- DESCTYPE_LDT, 0);
- write_gdt_entry(get_cpu_gdt_table(cpu), GDT_ENTRY_LDT, a, b);
+ if (likely(entries == 0))
+ __asm__ __volatile__("lldt %w0"::"q" (0));
+ else {
+ unsigned cpu = smp_processor_id();
+ __u32 a, b;
+
+ pack_descriptor(&a, &b, (unsigned long)addr,
+ entries * sizeof(struct desc_struct) - 1,
+ DESCTYPE_LDT, 0);
+ write_gdt_entry(get_cpu_gdt_table(cpu), GDT_ENTRY_LDT, a, b);
+ __asm__ __volatile__("lldt %w0"::"q" (GDT_ENTRY_LDT*8));
+ } }

#define set_tss_desc(cpu,addr) __set_tss_desc(cpu, GDT_ENTRY_TSS, addr) @@ -153,35 +154,22 @@ static inline void set_ldt_desc(unsigned

static inline void clear_LDT(void)
{
- int cpu = get_cpu();
-
- set_ldt_desc(cpu, &default_ldt[0], 5);
- load_LDT_desc();
- put_cpu();
+ set_ldt(NULL, 0);
}

/*
* load one particular LDT into the current CPU
*/
-static inline void load_LDT_nolock(mm_context_t *pc, int cpu) +static inline void load_LDT_nolock(mm_context_t *pc) {
- void *segments = pc->ldt;
- int count = pc->size;
-
- if (likely(!count)) {
- segments = &default_ldt[0];
- count = 5;
- }
-
- set_ldt_desc(cpu, segments, count);
- load_LDT_desc();
+ set_ldt(pc->ldt, pc->size);
}

static inline void load_LDT(mm_context_t *pc)
{
- int cpu = get_cpu();
- load_LDT_nolock(pc, cpu);
- put_cpu();
+ preempt_disable();
+ load_LDT_nolock(pc);
+ preempt_enable();
}

static inline unsigned long get_desc_base(unsigned long *desc)

include/asm-i386/mmu_context.h +0 -0
diff -r 9d2218382a52 include/asm-i386/mmu_context.h
@@ -44,7 +44,7 @@ static inline void switch_mm(struct mm_s
		 * load the LDT, if the LDT is different:
		 */
		if (unlikely(prev->context.ldt != next->context.ldt))
-			load_LDT_nolock(&next->context, cpu);
+			load_LDT_nolock(&next->context);
	}
#ifdef CONFIG_SMP
	else {
@@ -56,7 +56,7 @@ static inline void switch_mm(struct mm_s
			 * tlb flush IPI delivery. We must reload %cr3.
			 */
			load_cr3(next->pgd);
-			load_LDT_nolock(&next->context, cpu);
+			load_LDT_nolock(&next->context);
		}
	}

#endif

Acked-by on v1 1/1
#1 lore raw
Quoted 14 lines · Jeremy Fitzhardinge

(This is the replacement for kill-default_ldt.patch.)

Remove default_ldt, and simplify ldt-setting.

This patch removes the default_ldt[] array, as it has been unused since iBCS stopped being supported. This means it is now possible to actually set an empty LDT segment.

In order to deal with this, the set_ldt_desc/load_LDT pair has been replaced with a single set_ldt() operation which is responsible for both setting up the LDT descriptor in the GDT, and reloading the LDT register. If there are no LDT entries, the LDT register is loaded with a NULL descriptor.

Quoted 3 lines

This looks good.

Zach

#2 lore raw
In reply to Jeremy Fitzhardinge
Quoted 4 lines · Jeremy Fitzhardinge

(This is the replacement for kill-default_ldt.patch.)

Remove default_ldt, and simplify ldt-setting.

Quoted 8 lines

This patch removes the default_ldt[] array, as it has been unused since iBCS stopped being supported. This means it is now possible to actually set an empty LDT segment.

In order to deal with this, the set_ldt_desc/load_LDT pair has been replaced with a single set_ldt() operation which is responsible for both setting up the LDT descriptor in the GDT, and reloading the LDT register.

Looks good.

Quoted 2 lines

If there are no LDT entries, the LDT register is loaded with a NULL descriptor.

x86-64 currently doesn't do this -- do you see an particular advantage in it?

-Andi

#3 lore raw
Quoted 7 lines · Andi Kleen
Quoted 4 lines

If there are no LDT entries, the LDT register is loaded with a NULL descriptor.

x86-64 currently doesn't do this -- do you see an particular advantage in it?

It's friendlier to virtual machines ;) And you can't get a zero sized LDT otherwise.