Skip to contentSkip to conversation

CMC/CPE: Reverse the order of fetching log and checking poll

PATCH New Hidetoshi Seto 1 participant 2 messages Sep 5, 2006 – Sep 8, 2006

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 CMC/CPE: Reverse the order of fetching log and checking poll

This patch reverses the order of fetching log from SAL and checking poll threshold. This will fix following trivial issues:

- If SAL_GET_SATE_INFO is unbelievably slow (due to huge system or just its silly implementation) and if it takes more than 1/5 sec, CMCI/CPEI will never switch to CMCP/CPEP.
- Assuming terrible flood of interrupt (continuous corrected errors let all CPUs enter to handler at once and bind them in it), CPUs will be serialized by IA64_LOG_LOCK(*). Now we check the poll threshold after the lock and log fetch, so we need to call SAL_GET_STATE_INFO (num_online_cpus() + 4) times in the worst case.
if we can check the threshold before the lock, we can shut up interrupts quickly without waiting preceding log fetches, and the number of times will be reduced to (num_online_cpus()) in the same situation.

---
  arch/ia64/kernel/mca.c |   18 ++++++++++--------
  1 files changed, 10 insertions(+), 8 deletions(-)

Index: linux-2.6.17-rc6/arch/ia64/kernel/mca.c =================================--- linux-2.6.17-rc6.orig/arch/ia64/kernel/mca.c +++ linux-2.6.17-rc6/arch/ia64/kernel/mca.c
@@ -345,9 +345,6 @@
/* SAL spec states this should run w/ interrupts enabled */ local_irq_enable();

- /* Get the CPE error record and log it */
- ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CPE);
-
spin_lock(&cpe_history_lock);
if (!cpe_poll_enabled && cpe_vector >= 0) {

@@ -376,7 +373,7 @@
mod_timer(&cpe_poll_timer, jiffies + MIN_CPE_POLL_INTERVAL);

/* lock already released, get out now */
- return IRQ_HANDLED;
+ goto out;
} else {
cpe_history[index++] = now;
if (index = CPE_HISTORY_LENGTH)
@@ -384,6 +381,10 @@
}
}
spin_unlock(&cpe_history_lock);
+out:
+ /* Get the CPE error record and log it */
+ ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CPE);
+
return IRQ_HANDLED;
}

@@ -1107,9 +1108,6 @@
/* SAL spec states this should run w/ interrupts enabled */ local_irq_enable();

- /* Get the CMC error record and log it */
- ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CMC);
-
spin_lock(&cmc_history_lock);
if (!cmc_polling_enabled) {
int i, count = 1; /* we know 1 happened now */
@@ -1142,7 +1140,7 @@
mod_timer(&cmc_poll_timer, jiffies + CMC_POLL_INTERVAL);

/* lock already released, get out now */
- return IRQ_HANDLED;
+ goto out;
} else {
cmc_history[index++] = now;
if (index = CMC_HISTORY_LENGTH)
@@ -1150,6 +1148,10 @@
}
}
spin_unlock(&cmc_history_lock);
+out:
+ /* Get the CMC error record and log it */
+ ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CMC);
+
return IRQ_HANDLED;
}

#1 lore raw

PATCH 1/1 CMC/CPE: Reverse the order of fetching log and checking poll

(Last patch was based on wrong/old kernel. This is repost.)

This patch reverses the order of fetching log from SAL and checking poll threshold. This will fix following trivial issues:

- If SAL_GET_SATE_INFO is unbelievably slow (due to huge system or just its silly implementation) and if it takes more than 1/5 sec, CMCI/CPEI will never switch to CMCP/CPEP.
- Assuming terrible flood of interrupt (continuous corrected errors let all CPUs enter to handler at once and bind them in it), CPUs will be serialized by IA64_LOG_LOCK(*). Now we check the poll threshold after the lock and log fetch, so we need to call SAL_GET_STATE_INFO (num_online_cpus() + 4) times in the worst case.
if we can check the threshold before the lock, we can shut up interrupts quickly without waiting preceding log fetches, and the number of times will be reduced to (num_online_cpus()) in the same situation.

---
  arch/ia64/kernel/mca.c |   18 ++++++++++--------
  1 files changed, 10 insertions(+), 8 deletions(-)

Index: linux-2.6.18-rc6/arch/ia64/kernel/mca.c =================================--- linux-2.6.18-rc6.orig/arch/ia64/kernel/mca.c +++ linux-2.6.18-rc6/arch/ia64/kernel/mca.c
@@ -344,9 +344,6 @@
/* SAL spec states this should run w/ interrupts enabled */ local_irq_enable();

- /* Get the CPE error record and log it */
- ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CPE);
-
spin_lock(&cpe_history_lock);
if (!cpe_poll_enabled && cpe_vector >= 0) {

@@ -375,7 +372,7 @@
mod_timer(&cpe_poll_timer, jiffies + MIN_CPE_POLL_INTERVAL);

/* lock already released, get out now */
- return IRQ_HANDLED;
+ goto out;
} else {
cpe_history[index++] = now;
if (index = CPE_HISTORY_LENGTH)
@@ -383,6 +380,10 @@
}
}
spin_unlock(&cpe_history_lock);
+out:
+ /* Get the CPE error record and log it */
+ ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CPE);
+
return IRQ_HANDLED;
}

@@ -1106,9 +1107,6 @@
/* SAL spec states this should run w/ interrupts enabled */ local_irq_enable();

- /* Get the CMC error record and log it */
- ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CMC);
-
spin_lock(&cmc_history_lock);
if (!cmc_polling_enabled) {
int i, count = 1; /* we know 1 happened now */
@@ -1141,7 +1139,7 @@
mod_timer(&cmc_poll_timer, jiffies + CMC_POLL_INTERVAL);

/* lock already released, get out now */
- return IRQ_HANDLED;
+ goto out;
} else {
cmc_history[index++] = now;
if (index = CMC_HISTORY_LENGTH)
@@ -1149,6 +1147,10 @@
}
}
spin_unlock(&cmc_history_lock);
+out:
+ /* Get the CMC error record and log it */
+ ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CMC);
+
return IRQ_HANDLED;
}