libxg: don't use max policy in xc_cpuid_xend_policy()
PATCH 1/1 libxg: don't use max policy in xc_cpuid_xend_policy()
Using max undermines the separation between default and max. For example, turning off AVX512F on an MPX-capable system silently turns on MPX, despite this not being part of the default policy anymore. Since the information is used only for determining what to convert 'x' to (but not to e.g. validate '1' settings), the effect of this change is identical for guests with (suitable) "cpuid=" settings to that of the changes separating default from max and then converting (e.g.) MPX from being part of default to only being part of max for guests without (affected) "cpuid=" settings.
tools/libs/guest/xg_cpuid_x86.c +17 -16
@@ -288,11 +288,11 @@ static int xc_cpuid_xend_policy(unsigned int nr_leaves, nr_msrs;uint32_t err_leaf =-1 , err_subleaf =-1 , err_msr =-1 ;/* -* Three full policies. The host, domain max, and domain current for the -* domain type. +* Three full policies. The host, default for the domain type, +* and domain current. */ -xen_cpuid_leaf_t *host =NULL , *max =NULL , *cur =NULL ; -unsigned int nr_host, nr_max, nr_cur; +xen_cpuid_leaf_t *host =NULL , *def =NULL , *cur =NULL ; +unsigned int nr_host, nr_def, nr_cur;if (xc_domain_getinfo (xch, domid,1 , &di) !=1 || di.domid != domid )
@@ -312,7 +312,7 @@ static int xc_cpuid_xend_policy( rc = -ENOMEM ;if ( (host =calloc (nr_leaves,sizeof (*host))) ==NULL || - (max =calloc (nr_leaves,sizeof (*max))) ==NULL || + (def =calloc (nr_leaves,sizeof (*def))) ==NULL || (cur =calloc (nr_leaves,sizeof (*cur))) ==NULL ) {ERROR ("Unable to allocate memory for %u CPUID leaves" , nr_leaves);
@@ -330,15 +330,16 @@ static int xc_cpuid_xend_policy( goto fail; } -/* Get the domain's max policy. */ +/* Get the domain type's default policy. */ nr_msrs =0 ; - nr_max = nr_leaves; - rc =xc_get_system_cpu_policy (xch, di.hvm ? XEN_SYSCTL_cpu_policy_hvm_max - : XEN_SYSCTL_cpu_policy_pv_max, - &nr_max, max, &nr_msrs,NULL ); + nr_def = nr_leaves; + rc =xc_get_system_cpu_policy (xch, + di.hvm ? XEN_SYSCTL_cpu_policy_hvm_default + : XEN_SYSCTL_cpu_policy_pv_default, + &nr_def, def, &nr_msrs,NULL );if ( rc ) { -PERROR ("Failed to obtain %s max policy" , di.hvm ?"hvm" :"pv" ); +PERROR ("Failed to obtain %s def policy" , di.hvm ?"hvm" :"pv" ); rc = -errno; goto fail; }
@@ -359,10 +360,10 @@ static int xc_cpuid_xend_policy(for ( ; xend->leaf !=XEN_CPUID_INPUT_UNUSED ; ++xend ) {xen_cpuid_leaf_t *cur_leaf =find_leaf (cur, nr_cur, xend); -const xen_cpuid_leaf_t *max_leaf =find_leaf (max, nr_max, xend); +const xen_cpuid_leaf_t *def_leaf =find_leaf (def, nr_def, xend);const xen_cpuid_leaf_t *host_leaf =find_leaf (host, nr_host, xend); -if ( cur_leaf ==NULL || max_leaf ==NULL || host_leaf ==NULL ) +if ( cur_leaf ==NULL || def_leaf ==NULL || host_leaf ==NULL ) {ERROR ("Missing leaf %#x, subleaf %#x" , xend->leaf, xend->subleaf); goto fail;
@@ -371,7 +372,7 @@ static int xc_cpuid_xend_policy(for (unsigned int i =0 ; i <ARRAY_SIZE (xend->policy); i++ ) {uint32_t *cur_reg = &cur_leaf->a + i; -const uint32_t *max_reg = &max_leaf->a + i; +const uint32_t *def_reg = &def_leaf->a + i;const uint32_t *host_reg = &host_leaf->a + i;if ( xend->policy[i] ==NULL )
@@ -386,7 +387,7 @@ static int xc_cpuid_xend_policy(else if ( xend->policy[i][j] =='0' ) val = false;else if ( xend->policy[i][j] =='x' ) - val =test_bit (31 - j, max_reg); + val =test_bit (31 - j, def_reg);else if ( xend->policy[i][j] =='k' || xend->policy[i][j] =='s' ) val =test_bit (31 - j, host_reg);
@@ -419,7 +420,7 @@ static int xc_cpuid_xend_policy( fail:free (cur); -free (max); +free (def);free (host);return rc;
Quoted 11 lines · Jan Beulich
Using max undermines the separation between default and max. For example, turning off AVX512F on an MPX-capable system silently turns on MPX, despite this not being part of the default policy anymore. Since the information is used only for determining what to convert 'x' to (but not to e.g. validate '1' settings), the effect of this change is identical for guests with (suitable) "cpuid=" settings to that of the changes separating default from max and then converting (e.g.) MPX from being part of default to only being part of max for guests without (affected) "cpuid=" settings.
Signed-off-by Jan Beulich <[email protected]>
I will defer this to Andrew.
Quoted 11 lines · Wei Liu
Quoted 10 lines · Jan Beulich
Using max undermines the separation between default and max. For example, turning off AVX512F on an MPX-capable system silently turns on MPX, despite this not being part of the default policy anymore. Since the information is used only for determining what to convert 'x' to (but not to e.g. validate '1' settings), the effect of this change is identical for guests with (suitable) "cpuid=" settings to that of the changes separating default from max and then converting (e.g.) MPX from being part of default to only being part of max for guests without (affected) "cpuid=" settings.
Quoted 3 lines
Quoted 1 line
Signed-off-by Jan Beulich <[email protected]>I will defer this to Andrew.
Andrew?
Thanks, Jan
Ping: [PATCH] libxg: don't use max policy in xc_cpuid_xend_policy()
Quoted 12 lines · Jan Beulich
Quoted 11 lines · Wei Liu
Quoted 10 lines · Jan Beulich
Using max undermines the separation between default and max. For example, turning off AVX512F on an MPX-capable system silently turns on MPX, despite this not being part of the default policy anymore. Since the information is used only for determining what to convert 'x' to (but not to e.g. validate '1' settings), the effect of this change is identical for guests with (suitable) "cpuid=" settings to that of the changes separating default from max and then converting (e.g.) MPX from being part of default to only being part of max for guests without (affected) "cpuid=" settings.
Quoted 5 lines
Quoted 3 lines
Quoted 1 line
Signed-off-by Jan Beulich <[email protected]>I will defer this to Andrew.
Andrew?
Yet another one (here having been pending for nearly 5 months), and hence same thing (despite again not feeling well, albeit iirc at the time we discussed this on irc and you looked to be basically agreeing): I intend to commit this once the tree is fully open again, unless I hear otherwise.
Jan
Quoted 11 lines · Jan Beulich
Using max undermines the separation between default and max. For example, turning off AVX512F on an MPX-capable system silently turns on MPX, despite this not being part of the default policy anymore. Since the information is used only for determining what to convert 'x' to (but not to e.g. validate '1' settings), the effect of this change is identical for guests with (suitable) "cpuid=" settings to that of the changes separating default from max and then converting (e.g.) MPX from being part of default to only being part of max for guests without (affected) "cpuid=" settings.
Signed-off-by Jan Beulich <[email protected]>
This is a semantic change for how the xend string works. However, I do agree with your reasoning.
I'm pretty sure it won't be safe to backport across my change to effectively eliminate the s/k options, but that's fine because it was the same time period where I introduces a distinction between max and default.