KASAN for powerpc/32
Subsystems (4)
v11 cover KASAN for powerpc/32
This series adds KASAN support to powerpc/32
32 bits tested on nohash/32 (8xx), book3s/32 (mpc832x ie 603) and qemu mac99
Changes in v11:
- Dropped book3e RFC part.
- Rebased on latest powerpc merge branch (b251649c77625b7ad4430e518dc0f1608be9edf4). Main impact is in head_32.S do to the merge with KUAP functionnality
- Added a fix from Daniel in prom_init: changed a direct struct assignation by a memcpy in patch 5
Changes in v10:
- Prepended the patch which fixes boot on hash32
- Reduced ifdef mess related to CONFIG_CMDLINE in prom_init.c
- Fixed strings preparation macros for ppc64 build (Reported by Daniel)
- Fixed boot failure on hash32 when total amount of memory is above the initial amount mapped with BATs.
- Reordered stuff in kasan.h to have a smoother patch when adding 64bit Book3E
- Split the change to PAGE_READONLY out of the hash32 patch.
- Appended Daniel's series for 64bit Book3E (with a build failure fix and a few cosmetic changes)
Changes in v9:
- Fixed fixmap IMMR alignment issue on 8xx with KASAN enabled.
- Set up final shadow page tables before switching to the final hash table on hash32
- Using PAGE_READONLY instead of PAGE_KERNEL_RO on hash32
- Use flash_tlb_kernel_range() instead of flash_tlb_mm() which doesn't work for kernel on some subarches.
- use __set_pte_at() instead of pte_update() to install final page tables
Changes in v8:
- Fixed circular issue between pgtable.h and fixmap.h
- Added missing includes in ppc64 string files
- Fixed kasan string related macro names for ppc64.
- Fixed most checkpatch messages
- build tested on kisskb (http://kisskb.ellerman.id.au/kisskb/head/6e65827de2fe71d21682dafd9084ed2cc6e06d4f/)
- moved CONFIG_KASAN_SHADOW_OFFSET in Kconfig.debug
Changes in v7:
- split in several smaller patches
- prom_init now has its own string functions
- full deactivation of powerpc-optimised string functions when KASAN is active
- shadow area now at a fixed place on very top of kernel virtual space.
- Early static hash table for hash book3s/32.
- Full support of both inline and outline instrumentation for both hash and nohash ppc32
- Earlier full activation of kasan.
Changes in v6:
- Fixed oops on module loading (due to access to RO shadow zero area).
- Added support for hash book3s/32, thanks to Daniel's patch to differ KASAN activation.
- Reworked handling of optimised string functions (dedicated patch for it)
- Reordered some files to ease adding of book3e/64 support.
Changes in v5:
- Added KASAN_SHADOW_OFFSET in Makefile, otherwise we fallback to KASAN_MINIMAL
and some stuff like stack instrumentation is not performed
- Moved calls to kasan_early_init() in head.S because stack instrumentation
in machine_init was performed before the call to kasan_early_init()
- Mapping kasan_early_shadow_page RW in kasan_early_init() and
remaping RO later in kasan_init()
- Allocating a big memblock() for shadow area, falling back to PAGE_SIZE blocks in case of failure.
Changes in v4:
- Comments from Andrey (DISABLE_BRANCH_PROFILING, Activation of reports)
- Proper initialisation of shadow area in kasan_init()
- Panic in case Hash table is required.
- Added comments in patch one to explain why *t = *s becomes memcpy(t, s, ...)
- Call of kasan_init_tags()
Changes in v3:
- Removed the printk() in kasan_early_init() to avoid build failure (see https://github.com/linuxppc/issues/issues/218)
- Added necessary changes in asm/book3s/32/pgtable.h to get it work on powerpc 603 family
- Added a few KASAN_SANITIZE_xxx.o := n to successfully boot on powerpc 603 family
Changes in v2:
- Rebased.
- Using __set_pte_at() to build the early table.
- Worked around and got rid of the patch adding asm/page.h in asm/pgtable-types.h
==> might be fixed independently but not needed for this serie.
Christophe Leroy (13):
powerpc/32: Move early_init() in a separate file
powerpc: prepare string/mem functions for KASAN
powerpc: remove CONFIG_CMDLINE #ifdef mess powerpc/prom_init: don't use string functions from lib/
powerpc: don't use direct assignation during early boot. powerpc/32: use memset() instead of memset_io() to zero BSS powerpc/32: make KVIRT_TOP dependent on FIXMAP_START powerpc/32: prepare shadow area for KASAN
powerpc: disable KASAN instrumentation on early/critical files. powerpc/32: Add KASAN support
powerpc/32s: move hash code patching out of MMU_init_hw() powerpc/32s: set up an early static hash table for KASAN. powerpc/32s: map kasan zero shadow with PAGE_READONLY instead of
PAGE_KERNEL_RO
arch/powerpc/Kconfig | 7 +- arch/powerpc/Kconfig.debug | 5 + arch/powerpc/include/asm/book3s/32/pgtable.h | 13 +- arch/powerpc/include/asm/fixmap.h | 5 + arch/powerpc/include/asm/kasan.h | 40 +++++ arch/powerpc/include/asm/nohash/32/pgtable.h | 13 +- arch/powerpc/include/asm/string.h | 32 +++- arch/powerpc/kernel/Makefile | 14 +- arch/powerpc/kernel/cputable.c | 13 +- arch/powerpc/kernel/early_32.c | 36 +++++ arch/powerpc/kernel/head_32.S | 76 ++++++--- arch/powerpc/kernel/head_40x.S | 3 + arch/powerpc/kernel/head_44x.S | 3 + arch/powerpc/kernel/head_8xx.S | 3 + arch/powerpc/kernel/head_fsl_booke.S | 3 + arch/powerpc/kernel/prom_init.c | 228 +++++++++++++++++++++------ arch/powerpc/kernel/prom_init_check.sh | 12 +- arch/powerpc/kernel/setup-common.c | 3 + arch/powerpc/kernel/setup_32.c | 28 ---- arch/powerpc/lib/Makefile | 19 ++- arch/powerpc/lib/copy_32.S | 12 +- arch/powerpc/lib/mem_64.S | 9 +- arch/powerpc/lib/memcpy_64.S | 4 +- arch/powerpc/mm/Makefile | 7 + arch/powerpc/mm/init_32.c | 3 + arch/powerpc/mm/kasan/Makefile | 5 + arch/powerpc/mm/kasan/kasan_init_32.c | 183 +++++++++++++++++++++ arch/powerpc/mm/mem.c | 4 + arch/powerpc/mm/mmu_decl.h | 2 + arch/powerpc/mm/ppc_mmu_32.c | 36 +++-- arch/powerpc/mm/ptdump/ptdump.c | 8 + arch/powerpc/platforms/powermac/Makefile | 6 + arch/powerpc/purgatory/Makefile | 3 + arch/powerpc/xmon/Makefile | 1 + 34 files changed, 697 insertions(+), 142 deletions(-) create mode 100644 arch/powerpc/include/asm/kasan.h create mode 100644 arch/powerpc/kernel/early_32.c create mode 100644 arch/powerpc/mm/kasan/Makefile create mode 100644 arch/powerpc/mm/kasan/kasan_init_32.c
Signature · 1 line
2.13.3
PATCH v11 1/13 powerpc/32: Move early_init() in a separate file
In preparation of KASAN, move early_init() into a separate file in order to allow deactivation of KASAN for that function.
--- arch/powerpc/kernel/Makefile | 2 +- arch/powerpc/kernel/early_32.c | 36 ++++++++++++++++++++++++++++++++++++ arch/powerpc/kernel/setup_32.c | 28 ---------------------------- 3 files changed, 37 insertions(+), 29 deletions(-) create mode 100644 arch/powerpc/kernel/early_32.c
arch/powerpc/kernel/Makefile +1 -1
@@ -93,7 +93,7 @@ extra-y += vmlinux.lds obj-$(CONFIG_RELOCATABLE) += reloc_$(BITS).o -obj-$(CONFIG_PPC32) += entry_32.o setup_32.o +obj-$(CONFIG_PPC32) += entry_32.o setup_32.o early_32.o obj-$(CONFIG_PPC64) += dma-iommu.o iommu.o obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_BOOTX_TEXT) += btext.o
arch/powerpc/kernel/early_32.c new file +36 -0
@@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* +* Early init before relocation +*/ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <asm/setup.h> +#include <asm/sections.h> +#include <asm/asm-prototypes.h> + +/* +* We're called here very early in the boot. +* +* Note that the kernel may be running at an address which is different +* from the address that it was linked at, so we must use RELOC/PTRRELOC +* to access static data (including strings). -- paulus +*/ +notrace unsigned long __init early_init (unsigned long dt_ptr) +{ +unsigned long offset =reloc_offset (); + +/* First zero the BSS -- use memset_io, some platforms don't have caches on yet */ +memset_io ((void __iomem *)PTRRELOC (&__bss_start),0 , __bss_stop - __bss_start); + +/* +* Identify the CPU type and fix up code sections +* that depend on which cpu we have. +*/ +identify_cpu (offset,mfspr (SPRN_PVR )); + +apply_feature_fixups (); + +return KERNELBASE + offset; +}
arch/powerpc/kernel/setup_32.c +0 -28
@@ -64,34 +64,6 @@ EXPORT_SYMBOL(DMA_MODE_READ);EXPORT_SYMBOL (DMA_MODE_WRITE );/* -* We're called here very early in the boot. -* -* Note that the kernel may be running at an address which is different -* from the address that it was linked at, so we must use RELOC/PTRRELOC -* to access static data (including strings). -- paulus -*/ -notrace unsigned long __init early_init (unsigned long dt_ptr) -{ -unsigned long offset =reloc_offset (); - -/* First zero the BSS -- use memset_io, some platforms don't have -* caches on yet */ -memset_io ((void __iomem *)PTRRELOC (&__bss_start),0 , - __bss_stop - __bss_start); - -/* -* Identify the CPU type and fix up code sections -* that depend on which cpu we have. -*/ -identify_cpu (offset,mfspr (SPRN_PVR )); - -apply_feature_fixups (); - -return KERNELBASE + offset; -} - - -/* * This is run before start_kernel(), the kernel has been relocated * and we are running with enough of the MMU enabled to have our * proper kernel virtual addresses
Signature · 1 line
2.13.3
Re: [PATCH v11 01/13] powerpc/32: Move early_init() in a separate file
Quoted 4 lines · Christophe Leroy
In preparation of KASAN, move
early_init()into a separate file in order to allow deactivation of KASAN for that function.Signed-off-by Christophe Leroy <[email protected]>
Series applied to powerpc next, thanks.
https://git.kernel.org/powerpc/c/d69ca6bab39e84a84781535b977c7e62
cheers
PATCH v11 2/13 powerpc: prepare string/mem functions for KASAN
In reply to Christophe LeroyCONFIG_KASAN implements wrappers for memcpy() memmove() and memset() Those wrappers are doing the verification then call respectively __memcpy() __memmove() and __memset(). The arches are therefore expected to rename their optimised functions that way.
For files on which KASAN is inhibited, #defines are used to allow them to directly call optimised versions of the functions without going through the KASAN wrappers.
See commit 393f203f5fd5 ("x86_64: kasan: add interceptors for memset/memmove/memcpy functions") for details.
Other string / mem functions do not (yet) have kasan wrappers, we therefore have to fallback to the generic versions when KASAN is active, otherwise KASAN checks will be skipped.
--- arch/powerpc/include/asm/kasan.h | 15 +++++++++++++++ arch/powerpc/include/asm/string.h | 32 +++++++++++++++++++++++++++++--- arch/powerpc/kernel/prom_init_check.sh | 10 +++++++++- arch/powerpc/lib/Makefile | 11 ++++++++--- arch/powerpc/lib/copy_32.S | 12 +++++++++--- arch/powerpc/lib/mem_64.S | 9 +++++++-- arch/powerpc/lib/memcpy_64.S | 4 +++- 7 files changed, 80 insertions(+), 13 deletions(-) create mode 100644 arch/powerpc/include/asm/kasan.h
arch/powerpc/include/asm/kasan.h new file +15 -0
@@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __ASM_KASAN_H +#define __ASM_KASAN_H + +#ifdef CONFIG_KASAN +#define _GLOBAL_KASAN (fn) _GLOBAL(__##fn) +#define _GLOBAL_TOC_KASAN (fn) _GLOBAL_TOC(__##fn) +#define EXPORT_SYMBOL_KASAN (fn) EXPORT_SYMBOL(__##fn) +#else +#define _GLOBAL_KASAN (fn) _GLOBAL(fn) +#define _GLOBAL_TOC_KASAN (fn) _GLOBAL_TOC(fn) +#define EXPORT_SYMBOL_KASAN (fn) +#endif + +#endif
arch/powerpc/include/asm/string.h +29 -3
@@ -4,14 +4,17 @@#ifdef __KERNEL__ +#ifndef CONFIG_KASAN #define __HAVE_ARCH_STRNCPY#define __HAVE_ARCH_STRNCMP +#define __HAVE_ARCH_MEMCHR +#define __HAVE_ARCH_MEMCMP +#define __HAVE_ARCH_MEMSET16 +#endif +#define __HAVE_ARCH_MEMSET#define __HAVE_ARCH_MEMCPY#define __HAVE_ARCH_MEMMOVE -#define __HAVE_ARCH_MEMCMP -#define __HAVE_ARCH_MEMCHR -#define __HAVE_ARCH_MEMSET16#define __HAVE_ARCH_MEMCPY_FLUSHCACHEextern char *strcpy (char *,const char *);
@@ -27,7 +30,27 @@ extern int memcmp(const void *,const void *,__kernel_size_t);extern void *memchr (const void *,int ,__kernel_size_t );extern void *memcpy_flushcache (void *,const void *,__kernel_size_t ); +void *__memset (void *s,int c,__kernel_size_t count); +void *__memcpy (void *to,const void *from,__kernel_size_t n); +void *__memmove (void *to,const void *from,__kernel_size_t n); + +#if defined(CONFIG_KASAN ) && !defined(__SANITIZE_ADDRESS__) +/* +* For files that are not instrumented (e.g. mm/slub.c) we +* should use not instrumented version of mem* functions. +*/ +#define memcpy (dst, src, len) __memcpy(dst, src, len) +#define memmove (dst, src, len) __memmove(dst, src, len) +#define memset (s, c, n) __memset(s, c, n) + +#ifndef __NO_FORTIFY +#define __NO_FORTIFY/* FORTIFY_SOURCE uses __builtin_memcpy, etc. */ +#endif + +#endif +#ifdef CONFIG_PPC64 +#ifndef CONFIG_KASAN #define __HAVE_ARCH_MEMSET32#define __HAVE_ARCH_MEMSET64
@@ -49,8 +72,11 @@ static inline void *memset64(uint64_t *p, uint64_t v, __kernel_size_t n) {return __memset64 (p, v, n *8 ); } +#endif #else +#ifndef CONFIG_KASAN #define __HAVE_ARCH_STRLEN +#endif extern void *memset16 (uint16_t *,uint16_t ,__kernel_size_t );#endif
arch/powerpc/kernel/prom_init_check.sh +9 -1
@@ -16,8 +16,16 @@ # If you really need to reference something from prom_init.o add # it to the list below: +grep "^CONFIG_KASAN=y$" .config >/dev/null +if [ $? -eq 0 ] +then + MEM_FUNCS="__memcpy __memset" +else + MEM_FUNCS="memcpy memset" +fi + WHITELIST="add_reloc_offset __bss_start __bss_stop copy_and_flush -_end enter_prom memcpy memset reloc_offset __secondary_hold +_end enter_prom $MEM_FUNCS reloc_offset __secondary_hold __secondary_hold_acknowledge __secondary_hold_spinloop __start strcmp strcpy strlcpy strlen strncmp strstr kstrtobool logo_linux_clut224 reloc_got2 kernstart_addr memstart_addr linux_banner _stext
arch/powerpc/lib/Makefile +8 -3
@@ -8,9 +8,14 @@ ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC) CFLAGS_REMOVE_code-patching.o = $(CC_FLAGS_FTRACE) CFLAGS_REMOVE_feature-fixups.o = $(CC_FLAGS_FTRACE) -obj-y += string.o alloc.o code-patching.o feature-fixups.o +obj-y += alloc.o code-patching.o feature-fixups.o -obj-$(CONFIG_PPC32) += div64.o copy_32.o crtsavres.o strlen_32.o +ifndef CONFIG_KASAN +obj-y += string.o memcmp_$(BITS).o +obj-$(CONFIG_PPC32) += strlen_32.o +endif + +obj-$(CONFIG_PPC32) += div64.o copy_32.o crtsavres.o obj-$(CONFIG_FUNCTION_ERROR_INJECTION) += error-inject.o
@@ -34,7 +39,7 @@ obj64-$(CONFIG_KPROBES_SANITY_TEST) += test_emulate_step.o \ test_emulate_step_exec_instr.o obj-y += checksum_$(BITS).o checksum_wrappers.o \ - string_$(BITS).o memcmp_$(BITS).o + string_$(BITS).o obj-y += sstep.o ldstfp.o quad.o obj64-y += quad.o
arch/powerpc/lib/copy_32.S +9 -3
@@ -14,6 +14,7 @@ #include <asm/ppc_asm.h> #include <asm/export.h> #include <asm/code-patching-asm.h> +#include <asm/kasan.h> #define COPY_16_BYTES \ lwz r7,4(r4); \
@@ -68,6 +69,7 @@ CACHELINE_BYTES = L1_CACHE_BYTES LG_CACHELINE_BYTES = L1_CACHE_SHIFT CACHELINE_MASK = (L1_CACHE_BYTES-1) +#ifndef CONFIG_KASAN _GLOBAL(memset16) rlwinm. r0 ,r5, 31, 1, 31 addi r6, r3, -4
@@ -81,6 +83,7 @@ _GLOBAL(memset16) sth r4, 4(r6) blr EXPORT_SYMBOL(memset16) +#endif /* * Use dcbz on the complete cache lines in the destination
@@ -91,7 +94,7 @@ EXPORT_SYMBOL(memset16) * We therefore skip the optimised bloc that uses dcbz. This jump is * replaced by a nop once cache is active. This is done in machine_init() */ -_GLOBAL(memset) +_GLOBAL_KASAN(memset) cmplwi 0,r5,4 blt 7f
@@ -151,6 +154,7 @@ _GLOBAL(memset) bdnz 9b blr EXPORT_SYMBOL(memset) +EXPORT_SYMBOL_KASAN(memset) /* * This version uses dcbz on the complete cache lines in the
@@ -163,12 +167,12 @@ EXPORT_SYMBOL(memset) * We therefore jump to generic_memcpy which doesn't use dcbz. This jump is * replaced by a nop once cache is active. This is done in machine_init() */ -_GLOBAL(memmove) +_GLOBAL_KASAN(memmove) cmplw 0,r3,r4 bgt backwards_memcpy /* fall through */ -_GLOBAL(memcpy) +_GLOBAL_KASAN(memcpy) 1: b generic_memcpy patch_site 1b, patch__memcpy_nocache
@@ -244,6 +248,8 @@ _GLOBAL(memcpy) 65: blr EXPORT_SYMBOL(memcpy) EXPORT_SYMBOL(memmove) +EXPORT_SYMBOL_KASAN(memcpy) +EXPORT_SYMBOL_KASAN(memmove) generic_memcpy: srwi. r7,r5,3
arch/powerpc/lib/mem_64.S +7 -2
@@ -12,7 +12,9 @@ #include <asm/errno.h> #include <asm/ppc_asm.h> #include <asm/export.h> +#include <asm/kasan.h> +#ifndef CONFIG_KASAN _GLOBAL(__memset16) rlwimi r4,r4,16,0,15 /* fall through */
@@ -29,8 +31,9 @@ _GLOBAL(__memset64) EXPORT_SYMBOL(__memset16) EXPORT_SYMBOL(__memset32) EXPORT_SYMBOL(__memset64) +#endif -_GLOBAL(memset) +_GLOBAL_KASAN(memset) neg r0,r3 rlwimi r4,r4,8,16,23 andi. r0,r0,7 /* # bytes to be 8-byte aligned */
@@ -96,8 +99,9 @@ _GLOBAL(memset) stb r4,0(r6) blr EXPORT_SYMBOL(memset) +EXPORT_SYMBOL_KASAN(memset) -_GLOBAL_TOC(memmove) +_GLOBAL_TOC_KASAN(memmove) cmplw 0,r3,r4 bgt backwards_memcpy b memcpy
@@ -139,3 +143,4 @@ _GLOBAL(backwards_memcpy) mtctr r7 b 1b EXPORT_SYMBOL(memmove) +EXPORT_SYMBOL_KASAN(memmove)
arch/powerpc/lib/memcpy_64.S +3 -1
@@ -11,6 +11,7 @@ #include <asm/export.h> #include <asm/asm-compat.h> #include <asm/feature-fixups.h> +#include <asm/kasan.h> #ifndef SELFTEST_CASE /* For big-endian, 0 == most CPUs, 1 == POWER6, 2 == Cell */
@@ -18,7 +19,7 @@ #endif .align 7 -_GLOBAL_TOC(memcpy) +_GLOBAL_TOC_KASAN(memcpy) BEGIN_FTR_SECTION #ifdef __LITTLE_ENDIAN__ cmpdi cr7,r5,0
@@ -230,3 +231,4 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) blr #endif EXPORT_SYMBOL(memcpy) +EXPORT_SYMBOL_KASAN(memcpy)
Signature · 1 line
2.13.3
PATCH v11 3/13 powerpc: remove CONFIG_CMDLINE #ifdef mess
In reply to Christophe LeroyThis patch makes CONFIG_CMDLINE defined at all time. It avoids having to enclose related code inside #ifdef CONFIG_CMDLINE
--- arch/powerpc/Kconfig | 6 +++--- arch/powerpc/kernel/prom_init.c | 9 +++------ 2 files changed, 6 insertions(+), 9 deletions(-)
arch/powerpc/Kconfig +3 -3
@@ -832,9 +832,9 @@ config CMDLINE_BOOL bool "Default bootloader kernel arguments" config CMDLINE - string "Initial kernel command string" - depends on CMDLINE_BOOL - default "console=ttyS0,9600 console=tty0 root=/dev/sda2" + string "Initial kernel command string" if CMDLINE_BOOL + default "console=ttyS0,9600 console=tty0 root=/dev/sda2" if CMDLINE_BOOL + default "" help On some platforms, there is currently no way for the boot loader to pass arguments to the kernel. For these platforms, you can supply
arch/powerpc/kernel/prom_init.c +3 -6
@@ -631,17 +631,14 @@ static void __init early_cmdline_parse(void)const char *opt;char *p; -int l__maybe_unused =0 ; +int l =0 ; prom_cmd_line[0 ] =0 ; p = prom_cmd_line;if ((long )prom.chosen >0 ) l =prom_getprop (prom.chosen,"bootargs" , p,COMMAND_LINE_SIZE -1 ); -#ifdef CONFIG_CMDLINE -if (l <=0 || p[0 ] =='\0' )/* dbl check */ -strlcpy (prom_cmd_line, -CONFIG_CMDLINE ,sizeof (prom_cmd_line)); -#endif /* CONFIG_CMDLINE */ +if (IS_ENABLED (CONFIG_CMDLINE_BOOL ) && (l <=0 || p[0 ] =='\0' ))/* dbl check */ +strlcpy (prom_cmd_line,CONFIG_CMDLINE ,sizeof (prom_cmd_line));prom_printf ("command line: %s\n" , prom_cmd_line);#ifdef CONFIG_PPC64
Signature · 1 line
2.13.3
PATCH v11 4/13 powerpc/prom_init: don't use string functions from lib/
In reply to Christophe LeroyWhen KASAN is active, the string functions in lib/ are doing the KASAN checks. This is too early for prom_init.
This patch implements dedicated string functions for prom_init, which will be compiled in with KASAN disabled.
Size of prom_init before the patch:
text data bss dec hex filename
12060 488 6960 19508 4c34 arch/powerpc/kernel/prom_init.o
Size of prom_init after the patch:
text data bss dec hex filename
12460 488 6960 19908 4dc4 arch/powerpc/kernel/prom_init.o
This increases the size of prom_init a bit, but as prom_init is in __init section, it is freed after boot anyway.
--- arch/powerpc/kernel/prom_init.c | 211 ++++++++++++++++++++++++++------- arch/powerpc/kernel/prom_init_check.sh | 2 +- 2 files changed, 171 insertions(+), 42 deletions(-)
arch/powerpc/kernel/prom_init.c +170 -41
@@ -224,6 +224,135 @@ static bool __prombss rtas_has_query_cpu_stopped;#define PHANDLE_VALID (p) ((p) != 0 && (p) != PROM_ERROR)#define IHANDLE_VALID (i) ((i) != 0 && (i) != PROM_ERROR) +/* Copied from lib/string.c and lib/kstrtox.c */ + +static int __init prom_strcmp (const char *cs,const char *ct) +{ +unsigned char c1, c2; + +while (1 ) { + c1 = *cs++; + c2 = *ct++; +if (c1 != c2) +return c1 < c2 ?-1 :1 ; +if (!c1) +break ; + } +return 0 ; +} + +static char __init *prom_strcpy (char *dest,const char *src) +{ +char *tmp = dest; + +while ((*dest++ = *src++) !='\0' ) +/* nothing */ ; +return tmp; +} + +static int __init prom_strncmp (const char *cs,const char *ct,size_t count) +{ +unsigned char c1, c2; + +while (count) { + c1 = *cs++; + c2 = *ct++; +if (c1 != c2) +return c1 < c2 ?-1 :1 ; +if (!c1) +break ; + count--; + } +return 0 ; +} + +static size_t __init prom_strlen (const char *s) +{ +const char *sc; + +for (sc = s; *sc !='\0' ; ++sc) +/* nothing */ ; +return sc - s; +} + +static int __init prom_memcmp (const void *cs,const void *ct,size_t count) +{ +const unsigned char *su1, *su2; +int res =0 ; + +for (su1 = cs, su2 = ct;0 < count; ++su1, ++su2, count--) +if ((res = *su1 - *su2) !=0 ) +break ; +return res; +} + +static char __init *prom_strstr (const char *s1,const char *s2) +{ +size_t l1, l2; + + l2 =prom_strlen (s2); +if (!l2) +return (char *)s1; + l1 =prom_strlen (s1); +while (l1 >= l2) { + l1--; +if (!prom_memcmp (s1, s2, l2)) +return (char *)s1; + s1++; + } +return NULL ; +} + +static size_t __init prom_strlcpy (char *dest,const char *src,size_t size) +{ +size_t ret =prom_strlen (src); + +if (size) { +size_t len = (ret >= size) ? size -1 : ret; +memcpy (dest, src, len); + dest[len] ='\0' ; + } +return ret; +} + +#ifdef CONFIG_PPC_PSERIES +static int __init prom_strtobool (const char *s,bool *res) +{ +if (!s) +return -EINVAL ; + +switch (s[0 ]) { +case 'y' : +case 'Y' : +case '1' : + *res = true; +return 0 ; +case 'n' : +case 'N' : +case '0' : + *res = false; +return 0 ; +case 'o' : +case 'O' : +switch (s[1 ]) { +case 'n' : +case 'N' : + *res = true; +return 0 ; +case 'f' : +case 'F' : + *res = false; +return 0 ; +default : +break ; + } +default : +break ; + } + +return -EINVAL ; +} +#endif /* This is the one and *ONLY* place where we actually call open * firmware.
@@ -555,7 +684,7 @@ static int __init prom_setprop(phandle node, const char *nodename,add_string (&p,tohex ((u32 )(unsigned long ) value));add_string (&p,tohex (valuelen));add_string (&p,tohex (ADDR (pname))); -add_string (&p,tohex (strlen (pname))); +add_string (&p,tohex (prom_strlen (pname)));add_string (&p,"property" ); *p =0 ;return call_prom ("interpret" ,1 ,1 , (u32 )(unsigned long ) cmd);
@@ -638,23 +767,23 @@ static void __init early_cmdline_parse(void)if ((long )prom.chosen >0 ) l =prom_getprop (prom.chosen,"bootargs" , p,COMMAND_LINE_SIZE -1 );if (IS_ENABLED (CONFIG_CMDLINE_BOOL ) && (l <=0 || p[0 ] =='\0' ))/* dbl check */ -strlcpy (prom_cmd_line,CONFIG_CMDLINE ,sizeof (prom_cmd_line)); +prom_strlcpy (prom_cmd_line,CONFIG_CMDLINE ,sizeof (prom_cmd_line));prom_printf ("command line: %s\n" , prom_cmd_line);#ifdef CONFIG_PPC64 - opt =strstr (prom_cmd_line,"iommu=" ); + opt =prom_strstr (prom_cmd_line,"iommu=" );if (opt) {prom_printf ("iommu opt is: %s\n" , opt); opt +=6 ;while (*opt && *opt ==' ' ) opt++; -if (!strncmp (opt,"off" ,3 )) +if (!prom_strncmp (opt,"off" ,3 )) prom_iommu_off =1 ; -else if (!strncmp (opt,"force" ,5 )) +else if (!prom_strncmp (opt,"force" ,5 )) prom_iommu_force_on =1 ; }#endif - opt =strstr (prom_cmd_line,"mem=" ); + opt =prom_strstr (prom_cmd_line,"mem=" );if (opt) { opt +=4 ; prom_memory_limit =prom_memparse (opt, (const char **)&opt);
@@ -666,13 +795,13 @@ static void __init early_cmdline_parse(void)#ifdef CONFIG_PPC_PSERIES prom_radix_disable = !IS_ENABLED (CONFIG_PPC_RADIX_MMU_DEFAULT ); - opt =strstr (prom_cmd_line,"disable_radix" ); + opt =prom_strstr (prom_cmd_line,"disable_radix" );if (opt) { opt +=13 ;if (*opt && *opt =='=' ) {bool val; -if (kstrtobool (++opt, &val)) +if (prom_strtobool (++opt, &val)) prom_radix_disable = false;else prom_radix_disable = val;
@@ -1025,7 +1154,7 @@ static int __init prom_count_smt_threads(void) type[0 ] =0 ;prom_getprop (node,"device_type" , type,sizeof (type)); -if (strcmp (type,"cpu" )) +if (prom_strcmp (type,"cpu" ))continue ;/* * There is an entry for each smt thread, each entry being
@@ -1472,7 +1601,7 @@ static void __init prom_init_mem(void)*/ prom_getprop (node,"name" , type,sizeof (type)); } -if (strcmp (type,"memory" )) +if (prom_strcmp (type,"memory" ))continue ; plen =prom_getprop (node,"reg" , regbuf,sizeof (regbuf));
@@ -1753,19 +1882,19 @@ static void __init prom_initialize_tce_table(void)prom_getprop (node,"device_type" , type,sizeof (type));prom_getprop (node,"model" , model,sizeof (model)); -if ((type[0 ] ==0 ) || (strstr (type,"pci" ) ==NULL )) +if ((type[0 ] ==0 ) || (prom_strstr (type,"pci" ) ==NULL ))continue ;/* Keep the old logic intact to avoid regression. */ if (compatible[0 ] !=0 ) { -if ((strstr (compatible,"python" ) ==NULL ) && - (strstr (compatible,"Speedwagon" ) ==NULL ) && - (strstr (compatible,"Winnipeg" ) ==NULL )) +if ((prom_strstr (compatible,"python" ) ==NULL ) && + (prom_strstr (compatible,"Speedwagon" ) ==NULL ) && + (prom_strstr (compatible,"Winnipeg" ) ==NULL ))continue ; }else if (model[0 ] !=0 ) { -if ((strstr (model,"ython" ) ==NULL ) && - (strstr (model,"peedwagon" ) ==NULL ) && - (strstr (model,"innipeg" ) ==NULL )) +if ((prom_strstr (model,"ython" ) ==NULL ) && + (prom_strstr (model,"peedwagon" ) ==NULL ) && + (prom_strstr (model,"innipeg" ) ==NULL ))continue ; }
@@ -1914,12 +2043,12 @@ static void __init prom_hold_cpus(void) type[0 ] =0 ;prom_getprop (node,"device_type" , type,sizeof (type)); -if (strcmp (type,"cpu" ) !=0 ) +if (prom_strcmp (type,"cpu" ) !=0 )continue ;/* Skip non-configured cpus. */ if (prom_getprop (node,"status" , type,sizeof (type)) >0 ) -if (strcmp (type,"okay" ) !=0 ) +if (prom_strcmp (type,"okay" ) !=0 )continue ; reg =cpu_to_be32 (-1 );/* make sparse happy */
@@ -1995,9 +2124,9 @@ static void __init prom_find_mmu(void)return ; version[sizeof (version) -1 ] =0 ;/* XXX might need to add other versions here */ -if (strcmp (version,"Open Firmware, 1.0.5" ) ==0 ) +if (prom_strcmp (version,"Open Firmware, 1.0.5" ) ==0 ) of_workarounds =OF_WA_CLAIM ; -else if (strncmp (version,"FirmWorks,3." ,12 ) ==0 ) { +else if (prom_strncmp (version,"FirmWorks,3." ,12 ) ==0 ) { of_workarounds =OF_WA_CLAIM |OF_WA_LONGTRAIL ;call_prom ("interpret" ,1 ,1 ,"dev /memory 0 to allow-reclaim" ); }else
@@ -2030,7 +2159,7 @@ static void __init prom_init_stdout(void)call_prom ("instance-to-path" ,3 ,1 , prom.stdout, path,255 );prom_printf ("OF stdout device is: %s\n" , of_stdout_device);prom_setprop (prom.chosen,"/chosen" ,"linux,stdout-path" , - path,strlen (path) +1 ); + path,prom_strlen (path) +1 );/* instance-to-package fails on PA-Semi */ stdout_node =call_prom ("instance-to-package" ,1 ,1 , prom.stdout);
@@ -2040,7 +2169,7 @@ static void __init prom_init_stdout(void)/* If it's a display, note it */ memset (type,0 ,sizeof (type));prom_getprop (stdout_node,"device_type" , type,sizeof (type)); -if (strcmp (type,"display" ) ==0 ) +if (prom_strcmp (type,"display" ) ==0 )prom_setprop (stdout_node, path,"linux,boot-display" ,NULL ,0 ); } }
@@ -2061,19 +2190,19 @@ static int __init prom_find_machine_type(void) compat[len] =0 ;while (i < len) {char *p = &compat[i]; -int sl =strlen (p); +int sl =prom_strlen (p);if (sl ==0 )break ; -if (strstr (p,"Power Macintosh" ) || -strstr (p,"MacRISC" )) +if (prom_strstr (p,"Power Macintosh" ) || +prom_strstr (p,"MacRISC" ))return PLATFORM_POWERMAC ;#ifdef CONFIG_PPC64 /* We must make sure we don't detect the IBM Cell * blades as pSeries due to some firmware issues, * so we do it here. */ -if (strstr (p,"IBM,CBEA" ) || -strstr (p,"IBM,CPBW-1.0" )) +if (prom_strstr (p,"IBM,CBEA" ) || +prom_strstr (p,"IBM,CPBW-1.0" ))return PLATFORM_GENERIC ;#endif /* CONFIG_PPC64 */ i += sl +1 ;
@@ -2090,7 +2219,7 @@ static int __init prom_find_machine_type(void) compat, sizeof(compat)-1);if (len <=0 )return PLATFORM_GENERIC ; -if (strcmp (compat,"chrp" )) +if (prom_strcmp (compat,"chrp" ))return PLATFORM_GENERIC ;/* Default to pSeries. We need to know if we are running LPAR */
@@ -2152,7 +2281,7 @@ static void __init prom_check_displays(void)for (node =0 ;prom_next_node (&node); ) {memset (type,0 ,sizeof (type));prom_getprop (node,"device_type" , type,sizeof (type)); -if (strcmp (type,"display" ) !=0 ) +if (prom_strcmp (type,"display" ) !=0 )continue ;/* It seems OF doesn't null-terminate the path :-( */
@@ -2256,9 +2385,9 @@ static unsigned long __init dt_find_string(char *str) s = os = (char *)dt_string_start; s +=4 ;while (s < (char *)dt_string_end) { -if (strcmp (s, str) ==0 ) +if (prom_strcmp (s, str) ==0 )return s - os; - s +=strlen (s) +1 ; + s +=prom_strlen (s) +1 ; }return 0 ; }
@@ -2291,7 +2420,7 @@ static void __init scan_dt_build_strings(phandle node, }/* skip "name" */ -if (strcmp (namep,"name" ) ==0 ) { +if (prom_strcmp (namep,"name" ) ==0 ) { *mem_start = (unsigned long )namep; prev_name ="name" ;continue ;
@@ -2303,7 +2432,7 @@ static void __init scan_dt_build_strings(phandle node, namep = sstart + soff; }else {/* Trim off some if we can */ - *mem_start = (unsigned long )namep +strlen (namep) +1 ; + *mem_start = (unsigned long )namep +prom_strlen (namep) +1 ; dt_string_end = *mem_start; } prev_name = namep;
@@ -2372,7 +2501,7 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start,break ;/* skip "name" */ -if (strcmp (pname,"name" ) ==0 ) { +if (prom_strcmp (pname,"name" ) ==0 ) { prev_name ="name" ;continue ; }
@@ -2403,7 +2532,7 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start,call_prom ("getprop" ,4 ,1 , node, pname, valp, l); *mem_start =_ALIGN (*mem_start,4 ); -if (!strcmp (pname,"phandle" )) +if (!prom_strcmp (pname,"phandle" )) has_phandle =1 ; }
@@ -2473,8 +2602,8 @@ static void __init flatten_device_tree(void)/* Add "phandle" in there, we'll need it */ namep =make_room (&mem_start, &mem_end,16 ,1 ); -strcpy (namep,"phandle" ); - mem_start = (unsigned long )namep +strlen (namep) +1 ; +prom_strcpy (namep,"phandle" ); + mem_start = (unsigned long )namep +prom_strlen (namep) +1 ;/* Build string array */ prom_printf ("Building dt strings...\n" );
@@ -2796,7 +2925,7 @@ static void __init fixup_device_tree_efika(void) rv =prom_getprop (node,"model" , prop,sizeof (prop));if (rv ==PROM_ERROR )return ; -if (strcmp (prop,"EFIKA5K2" )) +if (prom_strcmp (prop,"EFIKA5K2" ))return ;prom_printf ("Applying EFIKA device tree fixups\n" );
@@ -2804,13 +2933,13 @@ static void __init fixup_device_tree_efika(void)/* Claiming to be 'chrp' is death */ node =call_prom ("finddevice" ,1 ,1 ,ADDR ("/" )); rv =prom_getprop (node,"device_type" , prop,sizeof (prop)); -if (rv !=PROM_ERROR && (strcmp (prop,"chrp" ) ==0 )) +if (rv !=PROM_ERROR && (prom_strcmp (prop,"chrp" ) ==0 ))prom_setprop (node,"/" ,"device_type" ,"efika" ,sizeof ("efika" ));/* CODEGEN,description is exposed in /proc/cpuinfo so fix that too */ rv =prom_getprop (node,"CODEGEN,description" , prop,sizeof (prop)); -if (rv !=PROM_ERROR && (strstr (prop,"CHRP" ))) +if (rv !=PROM_ERROR && (prom_strstr (prop,"CHRP" )))prom_setprop (node,"/" ,"CODEGEN,description" ,"Efika 5200B PowerPC System" ,sizeof ("Efika 5200B PowerPC System" ));
arch/powerpc/kernel/prom_init_check.sh +1 -1
@@ -27,7 +27,7 @@ fi WHITELIST="add_reloc_offset __bss_start __bss_stop copy_and_flush _end enter_prom $MEM_FUNCS reloc_offset __secondary_hold __secondary_hold_acknowledge __secondary_hold_spinloop __start -strcmp strcpy strlcpy strlen strncmp strstr kstrtobool logo_linux_clut224 +logo_linux_clut224 reloc_got2 kernstart_addr memstart_addr linux_banner _stext __prom_init_toc_start __prom_init_toc_end btext_setup_display TOC."
Signature · 1 line
2.13.3
PATCH v11 5/13 powerpc: don't use direct assignation during early boot.
In reply to Christophe LeroyIn kernel/cputable.c, explicitly use memcpy() instead of *y = *x; This will allow GCC to replace it with __memcpy() when KASAN is selected.
--- arch/powerpc/kernel/cputable.c | 13 ++++++++++--- arch/powerpc/kernel/prom_init.c | 10 ++++++++-- 2 files changed, 18 insertions(+), 5 deletions(-)
arch/powerpc/kernel/cputable.c +10 -3
@@ -2147,7 +2147,11 @@ void __init set_cur_cpu_spec(struct cpu_spec *s)struct cpu_spec *t = &the_cpu_spec; t =PTRRELOC (t); - *t = *s; +/* +* use memcpy() instead of *t = *s so that GCC replaces it +* by __memcpy() when KASAN is active +*/ +memcpy (t, s,sizeof (*t)); *PTRRELOC (&cur_cpu_spec) = &the_cpu_spec; }
@@ -2161,8 +2165,11 @@ static struct cpu_spec * __init setup_cpu_spec(unsigned long offset, t =PTRRELOC (t); old = *t; -/* Copy everything, then do fixups */ - *t = *s; +/* +* Copy everything, then do fixups. Use memcpy() instead of *t = *s +* so that GCC replaces it by __memcpy() when KASAN is active +*/ +memcpy (t, s,sizeof (*t));/* * If we are overriding a previous value derived from the real
arch/powerpc/kernel/prom_init.c +8 -2
@@ -1264,8 +1264,14 @@ static void __init prom_check_platform_support(void)int prop_len =prom_getproplen (prom.chosen,"ibm,arch-vec-5-platform-support" ); -/* First copy the architecture vec template */ - ibm_architecture_vec = ibm_architecture_vec_template; +/* +* First copy the architecture vec template +* +* use memcpy() instead of *vec = *vec_template so that GCC replaces it +* by __memcpy() when KASAN is active +*/ +memcpy (&ibm_architecture_vec, &ibm_architecture_vec_template, +sizeof (ibm_architecture_vec));if (prop_len >1 ) {int i;
Signature · 1 line
2.13.3
PATCH v11 6/13 powerpc/32: use memset() instead of memset_io() to zero BSS
In reply to Christophe LeroySince commit 400c47d81ca38 ("powerpc32: memset: only use dcbz once cache is enabled"), memset() can be used before activation of the cache, so no need to use memset_io() for zeroing the BSS.
--- arch/powerpc/kernel/early_32.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/powerpc/kernel/early_32.c +2 -2
@@ -21,8 +21,8 @@ notrace unsigned long __init early_init(unsigned long dt_ptr) {unsigned long offset =reloc_offset (); -/* First zero the BSS -- use memset_io, some platforms don't have caches on yet */ -memset_io ((void __iomem *)PTRRELOC (&__bss_start),0 , __bss_stop - __bss_start); +/* First zero the BSS */ +memset (PTRRELOC (&__bss_start),0 , __bss_stop - __bss_start);/* * Identify the CPU type and fix up code sections
Signature · 1 line
2.13.3
PATCH v11 7/13 powerpc/32: make KVIRT_TOP dependent on FIXMAP_START
In reply to Christophe LeroyWhen we add KASAN shadow area, KVIRT_TOP can't be anymore fixed at 0xfe000000.
This patch uses FIXADDR_START to define KVIRT_TOP.
--- arch/powerpc/include/asm/book3s/32/pgtable.h | 13 ++++++++++--- arch/powerpc/include/asm/nohash/32/pgtable.h | 13 ++++++++++--- 2 files changed, 20 insertions(+), 6 deletions(-)
arch/powerpc/include/asm/book3s/32/pgtable.h +10 -3
@@ -134,15 +134,24 @@ static inline bool pte_user(pte_t pte)#define PGDIR_MASK (~(PGDIR_SIZE-1))#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) + +#ifndef __ASSEMBLY__ + +int map_kernel_page (unsigned long va,phys_addr_t pa,pgprot_t prot); + +#endif /* !__ASSEMBLY__ */ +/* * This is the bottom of the PKMAP area with HIGHMEM or an arbitrary * value (for now) on others, from where we can start layout kernel * virtual space that goes below PKMAP and FIXMAP */ +#include <asm/fixmap.h> +#ifdef CONFIG_HIGHMEM #define KVIRT_TOP PKMAP_BASE#else -#define KVIRT_TOP (0xfe000000UL)/* for now, could be FIXMAP_BASE ? */ +#define KVIRT_TOP FIXADDR_START#endif /*
@@ -373,8 +382,6 @@ static inline void __ptep_set_access_flags(struct vm_area_struct *vma,#define __pte_to_swp_entry (pte) ((swp_entry_t) { pte_val(pte) >> 3 })#define __swp_entry_to_pte (x) ((pte_t) { (x).val << 3 }) -int map_kernel_page (unsigned long va,phys_addr_t pa,pgprot_t prot); -/* Generic accessors to PTE bits */ static inline int pte_write (pte_t pte) {return !!(pte_val (pte) & _PAGE_RW);}static inline int pte_read (pte_t pte) {return 1 ; }
arch/powerpc/include/asm/nohash/32/pgtable.h +10 -3
@@ -64,15 +64,24 @@ extern int icache_44x_need_flush;#define pgd_ERROR (e) \ pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) +#ifndef __ASSEMBLY__ + +int map_kernel_page (unsigned long va,phys_addr_t pa,pgprot_t prot); + +#endif /* !__ASSEMBLY__ */ + +/* * This is the bottom of the PKMAP area with HIGHMEM or an arbitrary * value (for now) on others, from where we can start layout kernel * virtual space that goes below PKMAP and FIXMAP */ +#include <asm/fixmap.h> +#ifdef CONFIG_HIGHMEM #define KVIRT_TOP PKMAP_BASE#else -#define KVIRT_TOP (0xfe000000UL)/* for now, could be FIXMAP_BASE ? */ +#define KVIRT_TOP FIXADDR_START#endif /*
@@ -379,8 +388,6 @@ static inline int pte_young(pte_t pte)#define __pte_to_swp_entry (pte) ((swp_entry_t) { pte_val(pte) >> 3 })#define __swp_entry_to_pte (x) ((pte_t) { (x).val << 3 }) -int map_kernel_page (unsigned long va,phys_addr_t pa,pgprot_t prot); -#endif /* !__ASSEMBLY__ */ #endif /* __ASM_POWERPC_NOHASH_32_PGTABLE_H */
Signature · 1 line
2.13.3
PATCH v11 8/13 powerpc/32: prepare shadow area for KASAN
In reply to Christophe LeroyThis patch prepares a shadow area for KASAN.
The shadow area will be at the top of the kernel virtual memory space above the fixmap area and will occupy one eighth of the total kernel virtual memory space.
--- arch/powerpc/Kconfig.debug | 5 +++++ arch/powerpc/include/asm/fixmap.h | 5 +++++ arch/powerpc/include/asm/kasan.h | 16 ++++++++++++++++ arch/powerpc/mm/mem.c | 4 ++++ arch/powerpc/mm/ptdump/ptdump.c | 8 ++++++++ 5 files changed, 38 insertions(+)
arch/powerpc/Kconfig.debug +5 -0
@@ -366,3 +366,8 @@ config PPC_FAST_ENDIAN_SWITCH depends on DEBUG_KERNEL && PPC_BOOK3S_64 help If you're unsure what this is, say N. + +config KASAN_SHADOW_OFFSET + hex + depends on KASAN + default 0xe0000000
arch/powerpc/include/asm/fixmap.h +5 -0
@@ -22,7 +22,12 @@#include <asm/kmap_types.h> #endif +#ifdef CONFIG_KASAN +#include <asm/kasan.h> +#define FIXADDR_TOP (KASAN_SHADOW_START - PAGE_SIZE) +#else #define FIXADDR_TOP ((unsigned long)(-PAGE_SIZE)) +#endif /* * Here we define all the compile-time 'special' virtual
arch/powerpc/include/asm/kasan.h +16 -0
@@ -12,4 +12,20 @@#define EXPORT_SYMBOL_KASAN (fn)#endif +#ifndef __ASSEMBLY__ + +#include <asm/page.h> + +#define KASAN_SHADOW_SCALE_SHIFT 3 + +#define KASAN_SHADOW_START (KASAN_SHADOW_OFFSET + \ + (PAGE_OFFSET >> KASAN_SHADOW_SCALE_SHIFT)) + +#define KASAN_SHADOW_OFFSET ASM_CONST(CONFIG_KASAN_SHADOW_OFFSET) + +#define KASAN_SHADOW_END 0UL + +#define KASAN_SHADOW_SIZE (KASAN_SHADOW_END - KASAN_SHADOW_START) + +#endif /* __ASSEMBLY */ #endif
arch/powerpc/mm/mem.c +4 -0
@@ -310,6 +310,10 @@ void __init mem_init(void)mem_init_print_info (NULL );#ifdef CONFIG_PPC32 pr_info ("Kernel virtual memory layout:\n" ); +#ifdef CONFIG_KASAN +pr_info (" * 0x%08lx..0x%08lx : kasan shadow mem\n" , +KASAN_SHADOW_START ,KASAN_SHADOW_END ); +#endif pr_info (" * 0x%08lx..0x%08lx : fixmap\n" ,FIXADDR_START ,FIXADDR_TOP );#ifdef CONFIG_HIGHMEM pr_info(" * 0x%08lx..0x%08lx : highmem PTEs\n",
arch/powerpc/mm/ptdump/ptdump.c +8 -0
@@ -101,6 +101,10 @@ static struct addr_marker address_markers[] = { { 0, "Fixmap start" }, { 0, "Fixmap end" }, #endif +#ifdef CONFIG_KASAN + { 0, "kasan shadow mem start" }, + { 0, "kasan shadow mem end" }, +#endif { -1, NULL }, };
@@ -323,6 +327,10 @@ static void populate_markers(void)#endif address_markers[i++].start_address =FIXADDR_START ; address_markers[i++].start_address =FIXADDR_TOP ; +#ifdef CONFIG_KASAN + address_markers[i++].start_address =KASAN_SHADOW_START ; + address_markers[i++].start_address =KASAN_SHADOW_END ; +#endif #endif /* CONFIG_PPC64 */ }
Signature · 1 line
2.13.3
PATCH v11 9/13 powerpc: disable KASAN instrumentation on early/critical files.
In reply to Christophe LeroyAll files containing functions run before kasan_early_init() is called must have KASAN instrumentation disabled.
For those file, branch profiling also have to be disabled otherwise each if () generates a call to ftrace_likely_update().
--- arch/powerpc/kernel/Makefile | 12 ++++++++++++ arch/powerpc/lib/Makefile | 8 ++++++++ arch/powerpc/mm/Makefile | 6 ++++++ arch/powerpc/platforms/powermac/Makefile | 6 ++++++ arch/powerpc/purgatory/Makefile | 3 +++ arch/powerpc/xmon/Makefile | 1 + 6 files changed, 36 insertions(+)
arch/powerpc/kernel/Makefile +12 -0
@@ -31,6 +31,18 @@ CFLAGS_REMOVE_btext.o = $(CC_FLAGS_FTRACE) CFLAGS_REMOVE_prom.o = $(CC_FLAGS_FTRACE) endif +KASAN_SANITIZE_early_32.o := n +KASAN_SANITIZE_cputable.o := n +KASAN_SANITIZE_prom_init.o := n +KASAN_SANITIZE_btext.o := n + +ifdef CONFIG_KASAN +CFLAGS_early_32.o += -DDISABLE_BRANCH_PROFILING +CFLAGS_cputable.o += -DDISABLE_BRANCH_PROFILING +CFLAGS_prom_init.o += -DDISABLE_BRANCH_PROFILING +CFLAGS_btext.o += -DDISABLE_BRANCH_PROFILING +endif + obj-y := cputable.o ptrace.o syscalls.o \ irq.o align.o signal_32.o pmc.o vdso.o \ process.o systbl.o idle.o \
arch/powerpc/lib/Makefile +8 -0
@@ -8,6 +8,14 @@ ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC) CFLAGS_REMOVE_code-patching.o = $(CC_FLAGS_FTRACE) CFLAGS_REMOVE_feature-fixups.o = $(CC_FLAGS_FTRACE) +KASAN_SANITIZE_code-patching.o := n +KASAN_SANITIZE_feature-fixups.o := n + +ifdef CONFIG_KASAN +CFLAGS_code-patching.o += -DDISABLE_BRANCH_PROFILING +CFLAGS_feature-fixups.o += -DDISABLE_BRANCH_PROFILING +endif + obj-y += alloc.o code-patching.o feature-fixups.o ifndef CONFIG_KASAN
arch/powerpc/mm/Makefile +6 -0
@@ -7,6 +7,12 @@ ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC) CFLAGS_REMOVE_slb.o = $(CC_FLAGS_FTRACE) +KASAN_SANITIZE_ppc_mmu_32.o := n + +ifdef CONFIG_KASAN +CFLAGS_ppc_mmu_32.o += -DDISABLE_BRANCH_PROFILING +endif + obj-y := fault.o mem.o pgtable.o mmap.o \ init_$(BITS).o pgtable_$(BITS).o \ init-common.o mmu_context.o drmem.o
arch/powerpc/platforms/powermac/Makefile +6 -0
@@ -2,6 +2,12 @@ CFLAGS_bootx_init.o += -fPIC CFLAGS_bootx_init.o += $(call cc-option, -fno-stack-protector) +KASAN_SANITIZE_bootx_init.o := n + +ifdef CONFIG_KASAN +CFLAGS_bootx_init.o += -DDISABLE_BRANCH_PROFILING +endif + ifdef CONFIG_FUNCTION_TRACER # Do not trace early boot code CFLAGS_REMOVE_bootx_init.o = $(CC_FLAGS_FTRACE)
arch/powerpc/purgatory/Makefile +3 -0
@@ -1,4 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 + +KASAN_SANITIZE := n + targets += trampoline.o purgatory.ro kexec-purgatory.c LDFLAGS_purgatory.ro := -e purgatory_start -r --no-undefined
arch/powerpc/xmon/Makefile +1 -0
@@ -7,6 +7,7 @@ subdir-ccflags-y := $(call cc-disable-warning, builtin-requires-header) GCOV_PROFILE := n KCOV_INSTRUMENT := n UBSAN_SANITIZE := n +KASAN_SANITIZE := n # Disable ftrace for the entire directory ORIG_CFLAGS := $(KBUILD_CFLAGS)
Signature · 1 line
2.13.3
Re: [PATCH v11 09/13] powerpc: disable KASAN instrumentation on early/critical files.
Le 26/04/2019 à 18:23, Christophe Leroy a écrit :
Quoted 16 lines
All files containing functions run before
kasan_early_init()is called must have KASAN instrumentation disabled.For those file, branch profiling also have to be disabled otherwise each if () generates a call to
ftrace_likely_update().Signed-off-by Christophe Leroy <[email protected]>--- arch/powerpc/kernel/Makefile | 12 ++++++++++++ arch/powerpc/lib/Makefile | 8 ++++++++ arch/powerpc/mm/Makefile | 6 ++++++ arch/powerpc/platforms/powermac/Makefile | 6 ++++++ arch/powerpc/purgatory/Makefile | 3 +++ arch/powerpc/xmon/Makefile | 1 + 6 files changed, 36 insertions(+)
[...]
Quoted 5 lines
arch/powerpc/mm/Makefile +0
-0
arch/powerpc/mm/Makefile ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC) · line 15
Quoted 9 lines
arch/powerpc/mm/Makefile +6
-0@@ -7,6 +7,12 @@ ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC) CFLAGS_REMOVE_slb.o = $(CC_FLAGS_FTRACE) +KASAN_SANITIZE_ppc_mmu_32.o := n + +ifdef CONFIG_KASAN +CFLAGS_ppc_mmu_32.o += -DDISABLE_BRANCH_PROFILING +endif +
The above is missing in powerpc/next (should now be in arch/powerpc/mm/book3s32/Makefile )
Christophe
PATCH v11 10/13 powerpc/32: Add KASAN support
In reply to Christophe LeroyThis patch adds KASAN support for PPC32. The following patch will add an early activation of hash table for book3s. Until then, a warning will be raised if trying to use KASAN on an hash 6xx.
To support KASAN, this patch initialises that MMU mapings for accessing to the KASAN shadow area defined in a previous patch.
An early mapping is set as soon as the kernel code has been relocated at its definitive place.
Then the definitive mapping is set once paging is initialised.
For modules, the shadow area is allocated at module_alloc().
--- arch/powerpc/Kconfig | 1 + arch/powerpc/include/asm/kasan.h | 9 ++ arch/powerpc/kernel/head_32.S | 3 + arch/powerpc/kernel/head_40x.S | 3 + arch/powerpc/kernel/head_44x.S | 3 + arch/powerpc/kernel/head_8xx.S | 3 + arch/powerpc/kernel/head_fsl_booke.S | 3 + arch/powerpc/kernel/setup-common.c | 3 + arch/powerpc/mm/Makefile | 1 + arch/powerpc/mm/init_32.c | 3 + arch/powerpc/mm/kasan/Makefile | 5 ++ arch/powerpc/mm/kasan/kasan_init_32.c | 156 ++++++++++++++++++++++++++++++++++ 12 files changed, 193 insertions(+) create mode 100644 arch/powerpc/mm/kasan/Makefile create mode 100644 arch/powerpc/mm/kasan/kasan_init_32.c
arch/powerpc/Kconfig +1 -0
@@ -173,6 +173,7 @@ config PPC select GENERIC_TIME_VSYSCALL select HAVE_ARCH_AUDITSYSCALL select HAVE_ARCH_JUMP_LABEL + select HAVE_ARCH_KASAN if PPC32 select HAVE_ARCH_KGDB select HAVE_ARCH_MMAP_RND_BITS select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
arch/powerpc/include/asm/kasan.h +9 -0
@@ -27,5 +27,14 @@#define KASAN_SHADOW_SIZE (KASAN_SHADOW_END - KASAN_SHADOW_START) +#ifdef CONFIG_KASAN +void kasan_early_init (void ); +void kasan_mmu_init (void ); +void kasan_init (void ); +#else +static inline void kasan_init (void ) { } +static inline void kasan_mmu_init (void ) { } +#endif +#endif /* __ASSEMBLY */ #endif
arch/powerpc/kernel/head_32.S +3 -0
@@ -969,6 +969,9 @@ start_here: * Do early platform-specific initialization, * and set up the MMU. */ +#ifdef CONFIG_KASAN + bl kasan_early_init +#endif li r3,0 mr r4,r31 bl machine_init
arch/powerpc/kernel/head_40x.S +3 -0
@@ -848,6 +848,9 @@ start_here: /* * Decide what sort of machine this is and initialize the MMU. */ +#ifdef CONFIG_KASAN + bl kasan_early_init +#endif li r3,0 mr r4,r31 bl machine_init
arch/powerpc/kernel/head_44x.S +3 -0
@@ -203,6 +203,9 @@ _ENTRY(_start); /* * Decide what sort of machine this is and initialize the MMU. */ +#ifdef CONFIG_KASAN + bl kasan_early_init +#endif li r3,0 mr r4,r31 bl machine_init
arch/powerpc/kernel/head_8xx.S +3 -0
@@ -853,6 +853,9 @@ start_here: /* * Decide what sort of machine this is and initialize the MMU. */ +#ifdef CONFIG_KASAN + bl kasan_early_init +#endif li r3,0 mr r4,r31 bl machine_init
arch/powerpc/kernel/head_fsl_booke.S +3 -0
@@ -268,6 +268,9 @@ set_ivor: /* * Decide what sort of machine this is and initialize the MMU. */ +#ifdef CONFIG_KASAN + bl kasan_early_init +#endif mr r3,r30 mr r4,r31 bl machine_init
arch/powerpc/kernel/setup-common.c +3 -0
@@ -67,6 +67,7 @@#include <asm/livepatch.h> #include <asm/mmu_context.h> #include <asm/cpu_has_feature.h> +#include <asm/kasan.h> #include "setup.h"
@@ -871,6 +872,8 @@ static void smp_setup_pacas(void)*/ void __init setup_arch (char **cmdline_p) { +kasan_init (); + *cmdline_p = boot_command_line;/* Set a half-reasonable default so udelay does something sensible */
arch/powerpc/mm/Makefile +1 -0
@@ -53,6 +53,7 @@ obj-$(CONFIG_PPC_COPRO_BASE) += copro_fault.o obj-$(CONFIG_SPAPR_TCE_IOMMU) += mmu_context_iommu.o obj-$(CONFIG_PPC_PTDUMP) += ptdump/ obj-$(CONFIG_PPC_MEM_KEYS) += pkeys.o +obj-$(CONFIG_KASAN) += kasan/ # Disable kcov instrumentation on sensitive code # This is necessary for booting with kcov enabled on book3e machines
arch/powerpc/mm/init_32.c +3 -0
@@ -46,6 +46,7 @@#include <asm/sections.h> #include <asm/hugetlb.h> #include <asm/kup.h> +#include <asm/kasan.h> #include "mmu_decl.h"
@@ -179,6 +180,8 @@ void __init MMU_init(void)btext_unmap ();#endif +kasan_mmu_init (); +setup_kup ();/* Shortly after that, the entire linear mapping will be available */
arch/powerpc/mm/kasan/Makefile new file +5 -0
@@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + +KASAN_SANITIZE := n + +obj-$(CONFIG_PPC32) += kasan_init_32.o
arch/powerpc/mm/kasan/kasan_init_32.c new file +156 -0
156 lines not on this page · raw message
Signature · 1 line
2.13.3
Re: [PATCH v11 10/13] powerpc/32: Add KASAN support
Le 26/04/2019 à 18:23, Christophe Leroy a écrit :
Quoted 16 lines
This patch adds KASAN support for PPC32. The following patch will add an early activation of hash table for book3s. Until then, a warning will be raised if trying to use KASAN on an hash 6xx.
To support KASAN, this patch initialises that MMU mapings for accessing to the KASAN shadow area defined in a previous patch.
An early mapping is set as soon as the kernel code has been relocated at its definitive place.
Then the definitive mapping is set once paging is initialised.
For modules, the shadow area is allocated at
module_alloc().Signed-off-by Christophe Leroy <[email protected]>
Quoted 12 lines
--- arch/powerpc/Kconfig | 1 + arch/powerpc/include/asm/kasan.h | 9 ++ arch/powerpc/kernel/head_32.S | 3 + arch/powerpc/kernel/head_40x.S | 3 + arch/powerpc/kernel/head_44x.S | 3 + arch/powerpc/kernel/head_8xx.S | 3 + arch/powerpc/kernel/head_fsl_booke.S | 3 + arch/powerpc/kernel/setup-common.c | 3 + arch/powerpc/mm/Makefile | 1 + arch/powerpc/mm/init_32.c | 3 + arch/powerpc/mm/kasan/Makefile | 5 ++
Looks like the above Makefile is missing in powerpc/next ???
Christophe
Quoted 334 lines
arch/powerpc/mm/kasan/kasan_init_32.c | 156 ++++++++++++++++++++++++++++++++++ 12 files changed, 193 insertions(+)create mode 100644
arch/powerpc/mm/kasan/Makefilecreate mode 100644arch/powerpc/mm/kasan/kasan_init_32.carch/powerpc/Kconfig +1
-0@@ -173,6 +173,7 @@ config PPC select GENERIC_TIME_VSYSCALL select HAVE_ARCH_AUDITSYSCALL select HAVE_ARCH_JUMP_LABEL + select HAVE_ARCH_KASAN if PPC32 select HAVE_ARCH_KGDB select HAVE_ARCH_MMAP_RND_BITS select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPATarch/powerpc/include/asm/kasan.h +9
-0@@ -27,5 +27,14 @@#define KASAN_SHADOW_SIZE (KASAN_SHADOW_END - KASAN_SHADOW_START) +#ifdef CONFIG_KASAN +void kasan_early_init (void ); +void kasan_mmu_init (void ); +void kasan_init (void ); +#else +static inline void kasan_init (void ) { } +static inline void kasan_mmu_init (void ) { } +#endif +#endif /* __ASSEMBLY */ #endif arch/powerpc/kernel/head_32.S +3
-0@@ -969,6 +969,9 @@ start_here: * Do early platform-specific initialization, * and set up the MMU. */ +#ifdef CONFIG_KASAN + bl kasan_early_init +#endif li r3,0 mr r4,r31 bl machine_initarch/powerpc/kernel/head_40x.S +3
-0@@ -848,6 +848,9 @@ start_here: /* * Decide what sort of machine this is and initialize the MMU. */ +#ifdef CONFIG_KASAN + bl kasan_early_init +#endif li r3,0 mr r4,r31 bl machine_initarch/powerpc/kernel/head_44x.S +3
-0@@ -203,6 +203,9 @@ _ENTRY(_start); /* * Decide what sort of machine this is and initialize the MMU. */ +#ifdef CONFIG_KASAN + bl kasan_early_init +#endif li r3,0 mr r4,r31 bl machine_initarch/powerpc/kernel/head_8xx.S +3
-0@@ -853,6 +853,9 @@ start_here: /* * Decide what sort of machine this is and initialize the MMU. */ +#ifdef CONFIG_KASAN + bl kasan_early_init +#endif li r3,0 mr r4,r31 bl machine_initarch/powerpc/kernel/head_fsl_booke.S +3
-0@@ -268,6 +268,9 @@ set_ivor: /* * Decide what sort of machine this is and initialize the MMU. */ +#ifdef CONFIG_KASAN + bl kasan_early_init +#endif mr r3,r30 mr r4,r31 bl machine_initarch/powerpc/kernel/setup-common.c +3
-0@@ -67,6 +67,7 @@#include <asm/livepatch.h> #include <asm/mmu_context.h> #include <asm/cpu_has_feature.h> +#include <asm/kasan.h> #include "setup.h" @@ -871,6 +872,8 @@ static void smp_setup_pacas(void)*/ void __init setup_arch (char **cmdline_p) { +kasan_init (); + *cmdline_p = boot_command_line;/* Set a half-reasonable default so udelay does something sensible */ arch/powerpc/mm/Makefile +1
-0@@ -53,6 +53,7 @@ obj-$(CONFIG_PPC_COPRO_BASE) += copro_fault.o obj-$(CONFIG_SPAPR_TCE_IOMMU) += mmu_context_iommu.o obj-$(CONFIG_PPC_PTDUMP) += ptdump/ obj-$(CONFIG_PPC_MEM_KEYS) += pkeys.o +obj-$(CONFIG_KASAN) += kasan/ # Disable kcov instrumentation on sensitive code # This is necessary for booting with kcov enabled on book3e machinesarch/powerpc/mm/init_32.c +3
-0@@ -46,6 +46,7 @@#include <asm/sections.h> #include <asm/hugetlb.h> #include <asm/kup.h> +#include <asm/kasan.h> #include "mmu_decl.h" @@ -179,6 +180,8 @@ void __init MMU_init(void)btext_unmap ();#endif +kasan_mmu_init (); +setup_kup ();/* Shortly after that, the entire linear mapping will be available */ arch/powerpc/mm/kasan/Makefile new file +5
-0@@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + +KASAN_SANITIZE := n + +obj-$(CONFIG_PPC32) += kasan_init_32.oarch/powerpc/mm/kasan/kasan_init_32.c new file +156
-0@@ -0,0 +1,156 @@ +// SPDX-License-Identifier: GPL-2.0 + +#define DISABLE_BRANCH_PROFILING + +#include <linux/kasan.h> +#include <linux/printk.h> +#include <linux/memblock.h> +#include <linux/sched/task.h> +#include <linux/vmalloc.h> +#include <asm/pgalloc.h> +#include <asm/code-patching.h> +#include <mm/mmu_decl.h> + +static void kasan_populate_pte (pte_t *ptep,pgprot_t prot) +{ +unsigned long va = (unsigned long )kasan_early_shadow_page; +phys_addr_t pa =__pa (kasan_early_shadow_page); +int i; + +for (i =0 ; i <PTRS_PER_PTE ; i++, ptep++) +__set_pte_at (&init_mm, va, ptep,pfn_pte (PHYS_PFN (pa), prot),0 ); +} + +static int kasan_init_shadow_page_tables (unsigned long k_start,unsigned long k_end) +{ +pmd_t *pmd; +unsigned long k_cur, k_next; + + pmd =pmd_offset (pud_offset (pgd_offset_k (k_start), k_start), k_start); + +for (k_cur = k_start; k_cur != k_end; k_cur = k_next, pmd++) { +pte_t *new; + + k_next =pgd_addr_end (k_cur, k_end); +if ((void *)pmd_page_vaddr (*pmd) != kasan_early_shadow_pte) +continue ; + + new =pte_alloc_one_kernel (&init_mm); + +if (!new) +return -ENOMEM ; +kasan_populate_pte (new,PAGE_KERNEL_RO ); +pmd_populate_kernel (&init_mm, pmd, new); + } +return 0 ; +} + +static void __ref *kasan_get_one_page (void ) +{ +if (slab_is_available ()) +return (void *)__get_free_page (GFP_KERNEL | __GFP_ZERO); + +return memblock_alloc (PAGE_SIZE ,PAGE_SIZE ); +} + +static int __ref kasan_init_region (void *start,size_t size) +{ +unsigned long k_start = (unsigned long )kasan_mem_to_shadow (start); +unsigned long k_end = (unsigned long )kasan_mem_to_shadow (start + size); +unsigned long k_cur; +int ret; +void *block =NULL ; + + ret =kasan_init_shadow_page_tables (k_start, k_end); +if (ret) +return ret; + +if (!slab_is_available ()) + block =memblock_alloc (k_end - k_start,PAGE_SIZE ); + +for (k_cur = k_start; k_cur < k_end; k_cur +=PAGE_SIZE ) { +pmd_t *pmd =pmd_offset (pud_offset (pgd_offset_k (k_cur), k_cur), k_cur); +void *va = block ? block + k_cur - k_start :kasan_get_one_page (); +pte_t pte =pfn_pte (PHYS_PFN (__pa (va)),PAGE_KERNEL ); + +if (!va) +return -ENOMEM ; + +__set_pte_at (&init_mm, k_cur,pte_offset_kernel (pmd, k_cur), pte,0 ); + } +flush_tlb_kernel_range (k_start, k_end); +return 0 ; +} + +static void __init kasan_remap_early_shadow_ro (void ) +{ +kasan_populate_pte (kasan_early_shadow_pte,PAGE_KERNEL_RO ); + +flush_tlb_kernel_range (KASAN_SHADOW_START ,KASAN_SHADOW_END ); +} + +void __init kasan_mmu_init (void ) +{ +int ret; +struct memblock_region *reg; + +for_each_memblock (memory, reg) { +phys_addr_t base = reg->base; +phys_addr_t top =min (base + reg->size, total_lowmem); + +if (base >= top) +continue ; + + ret =kasan_init_region (__va (base), top - base); +if (ret) +panic ("kasan: kasan_init_region() failed" ); + } +} + +void __init kasan_init (void ) +{ +kasan_remap_early_shadow_ro (); + +clear_page (kasan_early_shadow_page); + +/* At this point kasan is fully initialized. Enable error messages */ + init_task.kasan_depth =0 ; +pr_info ("KASAN init done\n" ); +} + +#ifdef CONFIG_MODULES +void *module_alloc (unsigned long size) +{ +void *base =vmalloc_exec (size); + +if (!base) +return NULL ; + +if (!kasan_init_region (base, size)) +return base; + +vfree (base); + +return NULL ; +} +#endif + +void __init kasan_early_init (void ) +{ +unsigned long addr =KASAN_SHADOW_START ; +unsigned long end =KASAN_SHADOW_END ; +unsigned long next; +pmd_t *pmd =pmd_offset (pud_offset (pgd_offset_k (addr), addr), addr); + +BUILD_BUG_ON (KASAN_SHADOW_START & ~PGDIR_MASK ); + +kasan_populate_pte (kasan_early_shadow_pte,PAGE_KERNEL ); + +do { + next =pgd_addr_end (addr, end); +pmd_populate_kernel (&init_mm, pmd, kasan_early_shadow_pte); + }while (pmd++, addr = next, addr != end); + +if (early_mmu_has_feature (MMU_FTR_HPTE_TABLE )) +WARN (true,"KASAN not supported on hash 6xx" ); +}
PATCH v11 11/13 powerpc/32s: move hash code patching out of MMU_init_hw()
In reply to Christophe LeroyFor KASAN, hash table handling will be activated early for accessing to KASAN shadow areas.
In order to avoid any modification of the hash functions while they are still used with the early hash table, the code patching is moved out of MMU_init_hw() and put close to the big-bang switch to the final hash table.
--- arch/powerpc/kernel/head_32.S | 3 +++ arch/powerpc/mm/mmu_decl.h | 1 + arch/powerpc/mm/ppc_mmu_32.c | 36 ++++++++++++++++++++++-------------- 3 files changed, 26 insertions(+), 14 deletions(-)
arch/powerpc/kernel/head_32.S +3 -0
@@ -977,6 +977,9 @@ start_here: bl machine_init bl __save_cpu_setup bl MMU_init +BEGIN_MMU_FTR_SECTION + bl MMU_init_hw_patch +END_MMU_FTR_SECTION_IFSET(MMU_FTR_HPTE_TABLE) /* * Go back to running unmapped so we can load up new values
arch/powerpc/mm/mmu_decl.h +1 -0
@@ -130,6 +130,7 @@ extern void wii_memory_fixups(void);*/ #ifdef CONFIG_PPC32 extern void MMU_init_hw (void ); +void MMU_init_hw_patch (void );unsigned long mmu_mapin_ram (unsigned long base,unsigned long top);#endif
arch/powerpc/mm/ppc_mmu_32.c +22 -14
@@ -39,6 +39,7 @@struct hash_pte *Hash, *Hash_end;unsigned long Hash_size, Hash_mask;unsigned long _SDR1; +static unsigned int hash_mb, hash_mb2;struct ppc_bat BATS [8 ][2 ];/* 8 pairs of IBAT, DBAT */
@@ -308,7 +309,6 @@ void hash_preload(struct mm_struct *mm, unsigned long ea,*/ void __init MMU_init_hw (void ) { -unsigned int hmask, mb, mb2;unsigned int n_hpteg, lg_n_hpteg;if (!mmu_has_feature (MMU_FTR_HPTE_TABLE ))
@@ -351,20 +351,30 @@ void __init MMU_init_hw(void) (unsigned long long)(total_memory >> 20), Hash_size >> 10, Hash); -/* -* Patch up the instructions in hashtable.S:create_hpte -*/ -if ( ppc_md.progress ) ppc_md.progress ("hash:patch" ,0x345 ); Hash_mask = n_hpteg -1 ; - hmask = Hash_mask >> (16 -LG_HPTEG_SIZE ); - mb2 = mb =32 -LG_HPTEG_SIZE - lg_n_hpteg; + hash_mb2 = hash_mb =32 -LG_HPTEG_SIZE - lg_n_hpteg;if (lg_n_hpteg >16 ) - mb2 =16 -LG_HPTEG_SIZE ; + hash_mb2 =16 -LG_HPTEG_SIZE ; +} + +void __init MMU_init_hw_patch (void ) +{ +unsigned int hmask = Hash_mask >> (16 -LG_HPTEG_SIZE ); +if (ppc_md.progress) + ppc_md.progress ("hash:patch" ,0x345 ); +if (ppc_md.progress) + ppc_md.progress ("hash:done" ,0x205 ); + +/* WARNING: Make sure nothing can trigger a KASAN check past this point */ + +/* +* Patch up the instructions in hashtable.S:create_hpte +*/ modify_instruction_site (&patch__hash_page_A0,0xffff , ((unsigned int )Hash -PAGE_OFFSET ) >>16 ); -modify_instruction_site (&patch__hash_page_A1,0x7c0 , mb <<6 ); -modify_instruction_site (&patch__hash_page_A2,0x7c0 , mb2 <<6 ); +modify_instruction_site (&patch__hash_page_A1,0x7c0 , hash_mb <<6 ); +modify_instruction_site (&patch__hash_page_A2,0x7c0 , hash_mb2 <<6 );modify_instruction_site (&patch__hash_page_B,0xffff , hmask);modify_instruction_site (&patch__hash_page_C,0xffff , hmask);
@@ -373,11 +383,9 @@ void __init MMU_init_hw(void)*/ modify_instruction_site (&patch__flush_hash_A0,0xffff , ((unsigned int )Hash -PAGE_OFFSET ) >>16 ); -modify_instruction_site (&patch__flush_hash_A1,0x7c0 , mb <<6 ); -modify_instruction_site (&patch__flush_hash_A2,0x7c0 , mb2 <<6 ); +modify_instruction_site (&patch__flush_hash_A1,0x7c0 , hash_mb <<6 ); +modify_instruction_site (&patch__flush_hash_A2,0x7c0 , hash_mb2 <<6 );modify_instruction_site (&patch__flush_hash_B,0xffff , hmask); - -if ( ppc_md.progress ) ppc_md.progress ("hash:done" ,0x205 ); } void setup_initial_memory_limit(phys_addr_t first_memblock_base,
Signature · 1 line
2.13.3
PATCH v11 12/13 powerpc/32s: set up an early static hash table for KASAN.
In reply to Christophe LeroyKASAN requires early activation of hash table, before memblock() functions are available.
This patch implements an early hash_table statically defined in __initdata.
During early boot, a single page table is used.
For hash32, when doing the final init, one page table is allocated for each PGD entry because of the _PAGE_HASHPTE flag which can't be common to several virt pages. This is done after memblock get available but before switching to the final hash table, otherwise there are issues with TLB flushing due to the shared entries.
--- arch/powerpc/kernel/head_32.S | 70 ++++++++++++++++++++++------------- arch/powerpc/mm/kasan/kasan_init_32.c | 23 +++++++++++- arch/powerpc/mm/mmu_decl.h | 1 + 3 files changed, 68 insertions(+), 26 deletions(-)
arch/powerpc/kernel/head_32.S +45 -25
@@ -160,6 +160,10 @@ __after_mmu_off: bl flush_tlbs bl initial_bats + bl load_segment_registers +#ifdef CONFIG_KASAN + bl early_hash_table +#endif #if defined(CONFIG_BOOTX_TEXT) bl setup_disp_bat #endif
@@ -205,7 +209,7 @@ __after_mmu_off: */ turn_on_mmu: mfmsr r0 - ori r0,r0,MSR_DR|MSR_IR + ori r0,r0,MSR_DR|MSR_IR|MSR_RI mtspr SPRN_SRR1,r0 lis r0,start_here@h ori r0,r0,start_here@l
@@ -884,11 +888,24 @@ _ENTRY(__restore_cpu_setup) blr #endif /* !defined(CONFIG_PPC_BOOK3S_32) */ - /* * Load stuff into the MMU. Intended to be called with * IR=0 and DR=0. */ +#ifdef CONFIG_KASAN +early_hash_table: + sync /* Force all PTE updates to finish */ + isync + tlbia /* Clear all TLB entries */ + sync /* wait for tlbia/tlbie to finish */ + TLBSYNC /* ... on all CPUs */ + /* Load the SDR1 register (hash table base & size) */ + lis r6, early_hash - PAGE_OFFSET@h + ori r6, r6, 3 /* 256kB table */ + mtspr SPRN_SDR1, r6 + blr +#endif + load_up_mmu: sync /* Force all PTE updates to finish */ isync
@@ -900,29 +917,6 @@ load_up_mmu: tophys(r6,r6) lwz r6,_SDR1@l(r6) mtspr SPRN_SDR1,r6 - li r0, NUM_USER_SEGMENTS /* load up user segment register values */ - mtctr r0 /* for context 0 */ - li r3, 0 /* Kp = 0, Ks = 0, VSID = 0 */ -#ifdef CONFIG_PPC_KUEP - oris r3, r3, SR_NX@h /* Set Nx */ -#endif -#ifdef CONFIG_PPC_KUAP - oris r3, r3, SR_KS@h /* Set Ks */ -#endif - li r4,0 -3: mtsrin r3,r4 - addi r3,r3,0x111 /* increment VSID */ - addis r4,r4,0x1000 /* address of next segment */ - bdnz 3b - li r0, 16 - NUM_USER_SEGMENTS /* load up kernel segment registers */ - mtctr r0 /* for context 0 */ - rlwinm r3, r3, 0, ~SR_NX /* Nx = 0 */ - rlwinm r3, r3, 0, ~SR_KS /* Ks = 0 */ - oris r3, r3, SR_KP@h /* Kp = 1 */ -3: mtsrin r3, r4 - addi r3, r3, 0x111 /* increment VSID */ - addis r4, r4, 0x1000 /* address of next segment */ - bdnz 3b /* Load the BAT registers with the values set up by MMU_init. MMU_init takes care of whether we're on a 601 or not. */
@@ -944,6 +938,32 @@ BEGIN_MMU_FTR_SECTION END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS) blr +load_segment_registers: + li r0, NUM_USER_SEGMENTS /* load up user segment register values */ + mtctr r0 /* for context 0 */ + li r3, 0 /* Kp = 0, Ks = 0, VSID = 0 */ +#ifdef CONFIG_PPC_KUEP + oris r3, r3, SR_NX@h /* Set Nx */ +#endif +#ifdef CONFIG_PPC_KUAP + oris r3, r3, SR_KS@h /* Set Ks */ +#endif + li r4, 0 +3: mtsrin r3, r4 + addi r3, r3, 0x111 /* increment VSID */ + addis r4, r4, 0x1000 /* address of next segment */ + bdnz 3b + li r0, 16 - NUM_USER_SEGMENTS /* load up kernel segment registers */ + mtctr r0 /* for context 0 */ + rlwinm r3, r3, 0, ~SR_NX /* Nx = 0 */ + rlwinm r3, r3, 0, ~SR_KS /* Ks = 0 */ + oris r3, r3, SR_KP@h /* Kp = 1 */ +3: mtsrin r3, r4 + addi r3, r3, 0x111 /* increment VSID */ + addis r4, r4, 0x1000 /* address of next segment */ + bdnz 3b + blr + /* * This is where the main kernel code starts. */
arch/powerpc/mm/kasan/kasan_init_32.c +22 -1
@@ -94,6 +94,13 @@ void __init kasan_mmu_init(void)int ret;struct memblock_region *reg; +if (early_mmu_has_feature (MMU_FTR_HPTE_TABLE )) { + ret =kasan_init_shadow_page_tables (KASAN_SHADOW_START ,KASAN_SHADOW_END ); + +if (ret) +panic ("kasan: kasan_init_shadow_page_tables() failed" ); + } +for_each_memblock (memory, reg) {phys_addr_t base = reg->base;phys_addr_t top =min (base + reg->size, total_lowmem);
@@ -135,6 +142,20 @@ void *module_alloc(unsigned long size) }#endif +#ifdef CONFIG_PPC_BOOK3S_32 +u8 __initdata early_hash[256 <<10 ]__aligned(256 << 10) = {0 }; + +static void __init kasan_early_hash_table (void ) +{ +modify_instruction_site (&patch__hash_page_A0,0xffff ,__pa (early_hash) >>16 ); +modify_instruction_site (&patch__flush_hash_A0,0xffff ,__pa (early_hash) >>16 ); + + Hash = (struct hash_pte *)early_hash; +} +#else +static void __init kasan_early_hash_table (void ) {} +#endif +void __init kasan_early_init (void ) {unsigned long addr =KASAN_SHADOW_START ;
@@ -152,5 +173,5 @@ void __init kasan_early_init(void) }while (pmd++, addr = next, addr != end);if (early_mmu_has_feature (MMU_FTR_HPTE_TABLE )) -WARN (true,"KASAN not supported on hash 6xx" ); +kasan_early_hash_table (); }
arch/powerpc/mm/mmu_decl.h +1 -0
@@ -106,6 +106,7 @@ extern unsigned int rtas_data, rtas_size;struct hash_pte ;extern struct hash_pte *Hash, *Hash_end;extern unsigned long Hash_size, Hash_mask; +extern u8 early_hash[];#endif /* CONFIG_PPC32 */
Signature · 1 line
2.13.3
PATCH v11 13/13 powerpc/32s: map kasan zero shadow with PAGE_READONLY instead of PAGE_KERNEL_RO
In reply to Christophe LeroyFor hash32, the zero shadow page gets mapped with PAGE_READONLY instead of PAGE_KERNEL_RO, because the PP bits don't provide a RO kernel, so PAGE_KERNEL_RO is equivalent to PAGE_KERNEL. By using PAGE_READONLY, the page is RO for both kernel and user, but this is not a security issue as it contains only zeroes.
--- arch/powerpc/mm/kasan/kasan_init_32.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
arch/powerpc/mm/kasan/kasan_init_32.c +8 -2
@@ -39,7 +39,10 @@ static int kasan_init_shadow_page_tables(unsigned long k_start, unsigned long k_if (!new)return -ENOMEM ; -kasan_populate_pte (new,PAGE_KERNEL_RO ); +if (early_mmu_has_feature (MMU_FTR_HPTE_TABLE )) +kasan_populate_pte (new,PAGE_READONLY ); +else +kasan_populate_pte (new,PAGE_KERNEL_RO );pmd_populate_kernel (&init_mm, pmd, new); }return 0 ;
@@ -84,7 +87,10 @@ static int __ref kasan_init_region(void *start, size_t size)static void __init kasan_remap_early_shadow_ro (void ) { -kasan_populate_pte (kasan_early_shadow_pte,PAGE_KERNEL_RO ); +if (early_mmu_has_feature (MMU_FTR_HPTE_TABLE )) +kasan_populate_pte (kasan_early_shadow_pte,PAGE_READONLY ); +else +kasan_populate_pte (kasan_early_shadow_pte,PAGE_KERNEL_RO );flush_tlb_kernel_range (KASAN_SHADOW_START ,KASAN_SHADOW_END ); }
Signature · 1 line
2.13.3