Update for ucc_geth driver

Update the ucc_geth driver according to qe_lib changes. Fix l3qt bug.

---

drivers/net/Kconfig        |    2 +-
drivers/net/ucc_geth.c     |    6 +++---
drivers/net/ucc_geth_phy.c |    4 ++--
3 files changed, 6 insertions(+), 6 deletions(-)

index a2bd811..e0bd799 100644
@@ -2258,7 +2258,7 @@ config UGETH_TX_ON_DEMOND
 

config UGETH_HAS_GIGA
bool
- depends on UCC_GETH && MPC836x
+ depends on UCC_GETH && PPC_MPC836x

config MV643XX_ETH
tristate "MV-643XX Ethernet support"

index 47f49ef..6ca380b 100644
@@ -1722,7 +1722,7 @@ static void adjust_link(struct net_devic

		if (mii_info->speed != ugeth->oldspeed) {
			switch (mii_info->speed) {
			case 1000:

-#ifdef CONFIG_MPC836x
+#ifdef CONFIG_PPC_MPC836x
/* FIXME: This code is for 100Mbs BUG fixing,
remove this when it is fixed!!! */

				if (ugeth->ug_info->enet_interface ==
@@ -1768,7 +1768,7 @@ #endif				/* CONFIG_MPC8360 */
				break;
			case 100:
			case 10:

-#ifdef CONFIG_MPC836x
+#ifdef CONFIG_PPC_MPC836x
/* FIXME: This code is for 100Mbs BUG fixing,
remove this lines when it will be fixed!!! */

				ugeth->ug_info->enet_interface = ENET_100_RGMII;
@@ -3302,7 +3302,7 @@ static int ucc_geth_startup(ucc_geth_pri
		l3qt = 0;
		for (i = 0; i < 8; i++)
			l3qt |= (ug_info->l3qt[j + i] << (28 - 4 * i));
-		out_be32(&ugeth->p_rx_glbl_pram->l3qt[j], l3qt);
+		out_be32(&ugeth->p_rx_glbl_pram->l3qt[j/8], l3qt);
	}

	/* vlantype */

index f91028c..cc4fffb 100644
@@ -638,7 +638,7 @@ static int dm9161_ack_interrupt(struct u

/* FIXME: This lines are for BUG fixing in the mpc8325. Remove this from here when it's fixed */

	if (bcsr_regs == NULL)
-		bcsr_regs = (u8 *) ioremap(BCSR_PHYS_ADDR, BCSR_SIZE);
+		bcsr_regs = get_bcsr();
	bcsr_regs[14] |= 0x40;
	ugphy_vdbg("%s: IN", __FUNCTION__);

@@ -654,7 +654,7 @@ static int dm9161_config_intr(struct uge /* FIXME: This lines are for BUG fixing in the mpc8325. Remove this from here when it's fixed */

	if (bcsr_regs == NULL) {
-		bcsr_regs = (u8 *) ioremap(BCSR_PHYS_ADDR, BCSR_SIZE);
+		bcsr_regs = get_bcsr();
		bcsr_regs[14] &= ~0x40;
	}
	ugphy_vdbg("%s: IN", __FUNCTION__);