Skip to contentSkip to conversation

Kernel 2.6.18 PATA support for sata_promise not working for PDC20378 on MSI 865PE-NEO FISR2 motherboard

DISCUSSION Theo Kanter 2 participants 3 messages Oct 1, 2006

lore
Share & tools
lore
#0 lore raw

Kernel 2.6.18 claims to provide PATA support for sata_promise according to the changelog. However, 2.6.18 does not properly load the IDE disks that are attached to an onboard raid-controller Promise PDC200378 (aka Fastrak 378 or Fastrak S150 TX4) which resides on an MSI 865PE-NEO FISR2 motherboard as a "south bridge" for a maximum of two IDE disks and two SATA disks. I configured the BIOS for two IDE disks and RAID1 or as SATA and no change. The errors from sata_promise seen in the dmesg file as error messages (attached):

ata1: SATA max UDMA/133 cmd 0xF8802200 ctl 0xF8802238 bmdma 0x0 irq 11
ata2: SATA max UDMA/133 cmd 0xF8802280 ctl 0xF88022B8 bmdma 0x0 irq 11 scsi2 : sata_promise
ata1: SATA link down (SStatus 0 SControl 300)
scsi3 : sata_promise
ata2: SATA link down (SStatus 0 SControl 300)

Please Cc: [email protected] in your reply as I am not subscribed to this list. Thanks in advance
--theo

#1 lore raw
Quoted 1 line · Theo Kanter

Kernel 2.6.18 claims to provide PATA support for sata_promise according to the changelog.

Which changelog? I assure you (a) PATA support for sata_promise is not in 2.6.18, and (b) it implies nothing of the sort in the official kernel changelog on ftp.kernel.org.

Jeff

#2 lore raw
Quoted 3 lines · Jeff Garzik
Quoted 1 line · Theo Kanter

Kernel 2.6.18 claims to provide PATA support for sata_promise according to the changelog.

Which changelog? I assure you (a) PATA support for sata_promise is not in 2.6.18, and (b) it implies nothing of the sort in the official kernel changelog on ftp.kernel.org.

Thanks Jeff for a quick response. Well, it is only because http://www.kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.18 mentions the following:

Author: Jeff Garzik <[email protected]>
Date: Wed May 24 01:43:25 2006 -0400
[libata sata_promise] Add PATA cable detection. Original patch from Phillip Jordan <[email protected]> Cleanups and fixes by me.

Does this mean something other than that sata_promise actually provides support for PATA or how should I interpret this? Also, with respect to the error messages in my previous messages, could you please advise me about my options? (e.g., wait for a new kernel, etc.)?

Thanks,
Theo