Skip to contentSkip to conversation

Trying the configuration in nano.txt

LARTC Lluís Batlle 1 participant 2 messages Jul 5, 2005 – Jul 6, 2005

lore
Share & tools
lore
#0 lore raw

Hi!

(I sent other mails some time ago, about not-using the Julian's patches).

When I try the configuration from Nano.txt, having the Julian's patches applied, only the first 'hop' of the routing table "222" is used (according to tables shown in Nano.txt).

I saw that this question was asked some time ago, with no answer. Maybe someone can tell me the solution? The routing policy rules/tables are the same, as I sent in my last email, but with this table 222:
default proto static

        nexthop via 192.168.16.2  dev eth1 weight 1
        nexthop via 192.168.17.2  dev eth2 weight 1

Even trying lots of "ip route get x.x.x.x", always the first hop is chosen.

Everything is written according to Nano.txt (I think :).

Thanks!
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#1 lore raw

UF. Sorry. I answered stupidly to your email. You replied about the Julian's patches... I've sent a big amount of email, and not only about a single configuration.

I don't know why, but now the patches work. I swear I haven't changed anything in my configuration; simply, after rebooting, some minutes without changing anything, everything worked. Strange, strange.

So, it works.

Thanks! - Wow, I've learnt a lot about netfilter and policy routing...

Quoted 29 lines · Lluís Batlle
Quoted 11 lines · Vinay

Hi,
I had 3 cards, eth0 and eth1 connecting to 2 isps and eth2
connecting to lan. First i setup the address configuration for these cards without the gateway option. So i specified only Ip address and netmask. Then i gave the masquerade option for both the network cards and made necessary chnages in the firewall. Next I executed the script which i got from
http://mailman.ds9a.nl/pipermail/lartc/2003q4/010372.html. After
running the script the system was using both the connections . But
since i hadnt use the patch, it was not able to detect the dead gateway. So if one of the link goes down, it creates problem.

I tried that way, and routing works _only for local connections_. It doesn't work for NAT connections. So, the result is the same, as the configuration I was trying is the same, which is set in the script you gave. :)

Quoted 2 lines

Can u please explain how u have applied the patch .

I have not applied the patch in the configuration I'm trying to get working :) So, by now, I don't use that patch. I explain howI think the multipath routing + NAT doesn't work, in a mail I just sent. :) But as there I explained how I understand that nothing may work without patches (in the mail sent to the list, before this one), I'll start trying with the patches applied. I applied them to a vanilla kernel by:
cd /usr/src/linux
patch -p1 < the_patch.diff

Quoted 5 lines

This results in changing some files, as expected. So the patching should be well done.

Thanks!

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc