Trying the configuration in nano.txt
Quoted 11 lines · Vinay
Hi,
I had 3 cards, eth0 and eth1 connecting to 2 isps and eth2
connecting to lan. First i setup the address configuration for these cards without the gateway option. So i specified only Ip address and netmask. Then i gave the masquerade option for both the network cards and made necessary chnages in the firewall. Next I executed the script which i got from
http://mailman.ds9a.nl/pipermail/lartc/2003q4/010372.html. After
running the script the system was using both the connections . But
since i hadnt use the patch, it was not able to detect the dead gateway. So if one of the link goes down, it creates problem.
I tried that way, and routing works _only for local connections_. It doesn't work for NAT connections. So, the result is the same, as the configuration I was trying is the same, which is set in the script you gave. :)
Quoted 2 lines
Can u please explain how u have applied the patch .
I have not applied the patch in the configuration I'm trying to get working :) So, by now, I don't use that patch. I explain howI think the multipath routing + NAT doesn't work, in a mail I just sent. :) But as there I explained how I understand that nothing may work without patches (in the mail sent to the list, before this one), I'll start trying with the patches applied. I applied them to a vanilla kernel by:
cd /usr/src/linux
patch -p1 < the_patch.diff
This results in changing some files, as expected. So the patching should be well done.
Thanks!
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc