Skip to contentSkip to conversation

use of -m limit for Syn Flood protection

DISCUSSION Brent Clark 3 participants 5 messages Oct 14, 2006 – Oct 15, 2006

lore
Share & tools
lore
#0 lore raw

Hey all

In my continuous quest to understand TCP and netfilter / iptables more, I have started experimenting with rate limiting and different TCP Flags.

On my Lan I have mail server and obviously ident requests are perform etc, so I currently im trying this

# we allow 4 TCP connects per second, no more
$IPT -N syn-flood
$IPT -A syn-flood -m limit --limit 1/s --limit-burst 4 -j LOG --log-level info --log-prefix '#### Syn Flood ####'
$IPT -A syn-flood -m limit --limit 1/s --limit-burst 4 -j RETURN
$IPT -A syn-flood -j DROP

$IPT -t filter -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT $IPT -A FORWARD -p tcp --syn -j syn-flood

so now I get this

Oct 14 14:51:46 gate kernel: #### Syn Flood ####IN=eth1 OUT=eth0 SRC=192.168.111.11 DST=218.15.249.32 LEN=60 TOS=0x00 PREC=0x00 TTL=63 ID=23007 DF PROTO=TCP SPT=40108 DPT=113 WINDOW=5840 RES=0x00 SYN URGP=0
Oct 14 14:51:49 gate kernel: #### Syn Flood ####IN=eth1 OUT=eth0 SRC=192.168.111.11 DST=218.15.249.32 LEN=60 TOS=0x00 PREC=0x00 TTL=63 ID=23008 DF PROTO=TCP SPT=40108 DPT=113 WINDOW=5840 RES=0x00 SYN URGP=0
Oct 14 14:51:55 gate kernel: #### Syn Flood ####IN=eth1 OUT=eth0 SRC=192.168.111.11 DST=218.15.249.32 LEN=60 TOS=0x00 PREC=0x00 TTL=63 ID=23009 DF PROTO=TCP SPT=40108 DPT=113 WINDOW=5840 RES=0x00 SYN URGP=0
Oct 14 14:52:07 gate kernel: #### Syn Flood ####IN=eth1 OUT=eth0 SRC=192.168.111.11 DST=218.15.249.32 LEN=60 TOS=0x00 PREC=0x00 TTL=63 ID=23010 DF PROTO=TCP SPT=40108 DPT=113 WINDOW=5840 RES=0x00 SYN URGP=0

So my question is, have I maybe been to aggressive on the limit.

I use the -j syn-flood for both FORWARD and INPUT

#1 lore raw
Quoted 10 lines · Brent Clark
# we allow 4 TCP connects per second, no more
$IPT -N syn-flood
$IPT -A syn-flood -m limit --limit 1/s --limit-burst 4 -j LOG --log-level info --log-prefix '#### Syn Flood ####'
$IPT -A syn-flood -m limit --limit 1/s --limit-burst 4 -j RETURN
$IPT -A syn-flood -j DROP

So my question is, have I maybe been to aggressive on the limit.

If you're trying to limit the SYNs to 4/sec, then the --limit should be "--limit 4/s" along with the --limit-burst 4. Though, 4 SYNs per second is hardly a syn flood. Also, you may want to specify the destination port of the syn flood to give more grainular control.

Signature · 5 lines
Jiann-Ming Su
"I have to decide between two equally frightening options.
If I wanted to do that, I'd vote." --Duckman
"The system's broke, Hank.  The election baby has peed in
the bath water.  You got to throw 'em both out."  --Dale Gribble
#2 lore raw
Quoted 4 lines · Jiann-Ming Su

If you're trying to limit the SYNs to 4/sec, then the --limit should be "--limit 4/s" along with the --limit-burst 4. Though, 4 SYNs per second is hardly a syn flood. Also, you may want to specify the destination port of the syn flood to give more grainular control.

Hi Jiann

Thank you for your reply.

May I ask what you would consider a more realistic limit /value.

I currently have ports 25, 80 and 443 open. I would like to strive to get a respectable value that would cater for these ports.

Kind Regards
Brent Clark

#3 lore raw
Quoted 8 lines · Brent Clark

Thank you for your reply.

May I ask what you would consider a more realistic limit /value.

I currently have ports 25, 80 and 443 open. I would like to strive to get a respectable value that would cater for these ports.

Here's what we've used for the wild, wild west that is a residential hall network for a university:

-A FORWARD -i eth2 -p tcp -m tcp --tcp-flags SYN SYN -j FWD_SYN -A FWD_SYN -p tcp -m tcp --tcp-flags FIN FIN -m limit --limit 10/min -j ULOG --ulog-prefix "iptables S
YN/FIN attack"
-A FWD_SYN -p tcp -m tcp --tcp-flags FIN FIN -j DROP
-A FWD_SYN -p tcp -m tcp --dport 80 -m limit --limit 200/sec --limit-burst 400 -j ACCEPT
-A FWD_SYN -p tcp -m tcp --dport 135 -m limit --limit 50/sec --limit-burst 50 -j ACCEPT
-A FWD_SYN -p tcp -m tcp --dport 139 -m limit --limit 50/sec --limit-burst 50 -j ACCEPT
-A FWD_SYN -p tcp -m tcp --dport 443 -m limit --limit 50/sec --limit-burst 50 -j ACCEPT
-A FWD_SYN -p tcp -m tcp --dport 445 -m limit --limit 50/sec --limit-burst 50 -j ACCEPT
-A FWD_SYN -p tcp -m tcp --dport 80 -m limit --limit 1/sec -j ULOG --ulog-prefix "iptables syn limit (http): "
-A FWD_SYN -p tcp -m multiport --dports 135,139,443,445 -m limit --limit 10/min -j ULOG --ulog-prefix "iptables syn limit (MS): " -A FWD_SYN -p tcp -m tcp -m multiport --dports 80,135,139,443,445 -j DROP -A FWD_SYN -p tcp -m tcp -m limit --limit 100/sec --limit-burst 200 -j ACCEPT -A FWD_SYN -p tcp -m tcp -m limit --limit 10/min -j ULOG --ulog-prefix "iptables syn limit: "
-A FWD_SYN -j DROP

Signature · 5 lines
Jiann-Ming Su
"I have to decide between two equally frightening options.
If I wanted to do that, I'd vote." --Duckman
"The system's broke, Hank.  The election baby has peed in
the bath water.  You got to throw 'em both out."  --Dale Gribble
#4 lore raw
In reply to Brent Clark

Hello,

Quoted 7 lines · Brent Clark
# we allow 4 TCP connects per second, no more
$IPT -N syn-flood
$IPT -A syn-flood -m limit --limit 1/s --limit-burst 4 -j LOG 
--log-level info --log-prefix '#### Syn Flood ####'
$IPT -A syn-flood -m limit --limit 1/s --limit-burst 4 -j RETURN
$IPT -A syn-flood -j DROP

This accepts only 1 packet per second after an initial 4-packet burst, and it logs *accepted* packets, not dropped ones. I am not sure this is what you want.

You probably want something like this instead, assuming there is an ACCEPT rule later that matches these packets in the calling chain :

$IPT -N syn-flood
$IPT -A syn-flood -m limit --limit 4/s --limit-burst 4 -j RETURN $IPT -A syn-flood -j LOG --log-level info \
--log-prefix '#### Syn Flood ####'
$IPT -A syn-flood -j DROP

You may also want to set a rate limit in the LOG rule not to prevent SYN flood but to prevent log flood. ;-)