Skip to contentSkip to conversation

Compile error: option `-g' is ambiguous

U-Boot-Users Timur Tabi 3 participants 8 messages Oct 26, 2006

lore
Share & tools
lore

Timur Tabi

author
#0 lore raw

I just pulled the latest tree and tried building for MPC8349EMDS, I got this:

make -C examples all
make[1]: Entering directory `/temp/u-boot.i2c/examples'

powerpc-unknown-linux-gnu-gcc -g  -Os   -fPIC -ffixed-r14 -meabi -D__KERNEL__ -DTEXT_BASE=0xFE000000  -I/temp/u-boot.i2c/include -fno-builtin -ffreestanding -nostdinc -isystem /_TOOLS_/.dist0/gnu-gcc-3.4.3-binutils-2.15-powerpc-unknown-linux-gnu/i686-pc-linux2.4/bin/../lib/gcc/powerpc-unknown-linux-gnu/3.4.3/include -pipe  -DCONFIG_PPC -D__powerpc__ -DCONFIG_MPC83XX -DCONFIG_E300 -ffixed-r2 -ffixed-r29 -msoft-float -Wall -Wstrict-prototypes -c -o hello_world.o hello_world.c
powerpc-unknown-linux-gnu-gcc -g  -Os   -fPIC -ffixed-r14 -meabi -D__KERNEL__ -DTEXT_BASE=0xFE000000  -I/temp/u-boot.i2c/include -fno-builtin -ffreestanding -nostdinc -isystem /_TOOLS_/.dist0/gnu-gcc-3.4.3-binutils-2.15-powerpc-unknown-linux-gnu/i686-pc-linux2.4/bin/../lib/gcc/powerpc-unknown-linux-gnu/3.4.3/include -pipe  -DCONFIG_PPC -D__powerpc__ -DCONFIG_MPC83XX -DCONFIG_E300 -ffixed-r2 -ffixed-r29 -msoft-float -Wall -Wstrict-prototypes -c -o sched.o sched.c

powerpc-unknown-linux-gnu-gcc -Wa,-g -D__ASSEMBLY__ -g -Os -fPIC -ffixed-r14 -meabi -D__KERNEL__ -DTEXT_BASE=0xFE000000 -I/temp/u-boot.i2c/include -fno-builtin -ffreestanding -nostdinc -isystem /_TOOLS_/.dist0/gnu-gcc-3.4.3-binutils-2.15-powerpc-unknown-linux-gnu/i686-pc-linux2.4/bin/../lib/gcc/powerpc-unknown-linux-gnu/3.4.3/include -pipe -DCONFIG_PPC -D__powerpc__ -DCONFIG_MPC83XX -DCONFIG_E300 -ffixed-r2 -ffixed-r29 -msoft-float -c -o ppc_longjmp.o ppc_longjmp.S
/_TOOLS_/.dist0/gnu-gcc-3.4.3-binutils-2.15-powerpc-unknown-linux-gnu/i686-pc-linux2.4/bin/../lib/gcc/powerpc-unknown-linux-gnu/3.4.3/../../../../powerpc-unknown-linux-gnu/bin/as: option `-g' is ambiguous make[1]: *** [ppc_longjmp.o] Error 2
make[1]: Leaving directory `/temp/u-boot.i2c/examples'
make: *** [examples] Error 2

Unfortunately, I wasn't paying much attention to the recent -g discussion, but it looks like whatever changes were made breaks the 8349EMDS.

Signature · 2 lines
Timur Tabi
Linux Kernel Developer @ Freescale
#1 lore raw

I think that your version of gas doesn't support the -g option without specifing the debugging info format.

Bye
Michael

Quoted 16 lines · Timur Tabi

I just pulled the latest tree and tried building for MPC8349EMDS, I got this:

make -C examples all
make[1]: Entering directory `/temp/u-boot.i2c/examples'

powerpc-unknown-linux-gnu-gcc -g  -Os   -fPIC -ffixed-r14 -meabi -D__KERNEL__ -DTEXT_BASE=0xFE000000  -I/temp/u-boot.i2c/include -fno-builtin -ffreestanding -nostdinc -isystem /_TOOLS_/.dist0/gnu-gcc-3.4.3-binutils-2.15-powerpc-unknown-linux-gnu/i686-pc-linux2.4/bin/../lib/gcc/powerpc-unknown-linux-gnu/3.4.3/include -pipe  -DCONFIG_PPC -D__powerpc__ -DCONFIG_MPC83XX -DCONFIG_E300 -ffixed-r2 -ffixed-r29 -msoft-float -Wall -Wstrict-prototypes -c -o hello_world.o hello_world.c
powerpc-unknown-linux-gnu-gcc -g  -Os   -fPIC -ffixed-r14 -meabi -D__KERNEL__ -DTEXT_BASE=0xFE000000  -I/temp/u-boot.i2c/include -fno-builtin -ffreestanding -nostdinc -isystem /_TOOLS_/.dist0/gnu-gcc-3.4.3-binutils-2.15-powerpc-unknown-linux-gnu/i686-pc-linux2.4/bin/../lib/gcc/powerpc-unknown-linux-gnu/3.4.3/include -pipe  -DCONFIG_PPC -D__powerpc__ -DCONFIG_MPC83XX -DCONFIG_E300 -ffixed-r2 -ffixed-r29 -msoft-float -Wall -Wstrict-prototypes -c -o sched.o sched.c

powerpc-unknown-linux-gnu-gcc -Wa,-g -D__ASSEMBLY__ -g -Os -fPIC -ffixed-r14 -meabi -D__KERNEL__ -DTEXT_BASE=0xFE000000 -I/temp/u-boot.i2c/include -fno-builtin -ffreestanding -nostdinc -isystem /_TOOLS_/.dist0/gnu-gcc-3.4.3-binutils-2.15-powerpc-unknown-linux-gnu/i686-pc-linux2.4/bin/../lib/gcc/powerpc-unknown-linux-gnu/3.4.3/include -pipe -DCONFIG_PPC -D__powerpc__ -DCONFIG_MPC83XX -DCONFIG_E300 -ffixed-r2 -ffixed-r29 -msoft-float -c -o ppc_longjmp.o ppc_longjmp.S
/_TOOLS_/.dist0/gnu-gcc-3.4.3-binutils-2.15-powerpc-unknown-linux-gnu/i686-pc-linux2.4/bin/../lib/gcc/powerpc-unknown-linux-gnu/3.4.3/../../../../powerpc-unknown-linux-gnu/bin/as: option `-g' is ambiguous make[1]: *** [ppc_longjmp.o] Error 2
make[1]: Leaving directory `/temp/u-boot.i2c/examples'
make: *** [examples] Error 2

Unfortunately, I wasn't paying much attention to the recent -g discussion, but it looks like whatever changes were made breaks the 8349EMDS.

author
#2 lore raw
Quoted 2 lines · Michael Trimarchi

I think that your version of gas doesn't support the -g option without specifing the debugging info format.

I'm running 2.15. The latest is 2.17. The changelog for 2.16 says this:

* Add a -g command line option to generate debug information in the target's preferred debug format.

I don't think U-Boot should require gas 2.16 or higher. Is this going to be a requirement? Updating our toolset is a real pain, and I'd rather fix the Makefile instead.

Signature · 2 lines
Timur Tabi
Linux Kernel Developer @ Freescale
#3 lore raw
Quoted 2 lines · In message <[email protected]> you wrote:

I don't think U-Boot should require gas 2.16 or higher. Is this going to be a requirement? Updating our toolset is a real pain, and I'd rather fix the Makefile instead.

We all agre that we don't want to require only the latest and greatest toolchains. I still couldn't make up my mind what the best way to fix the problem is. Please allow me for a little thinking...

Best regards,

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It is easier to change the specification to fit the program than vice
versa.
author
#4 lore raw
Quoted 6 lines · Wolfgang Denk
Quoted 1 line · In message <[email protected]> you wrote:

I don't think U-Boot should require gas 2.16 or higher. Is this going to be a requirement? Updating our toolset is a real pain, and I'd rather fix the Makefile instead.

We all agre that we don't want to require only the latest and greatest toolchains. I still couldn't make up my mind what the best way to fix the problem is. Please allow me for a little thinking...

Sure. But in the meantime, can you tell me where the -g option is specified? I'm looking through all the Makefiles and the git log, and I just can't find it.

Signature · 2 lines
Timur Tabi
Linux Kernel Developer @ Freescale
#5 lore raw
Quoted 2 lines · In message <[email protected]> you wrote:

Sure. But in the meantime, can you tell me where the -g option is specified? I'm looking through all the Makefiles and the git log, and I just can't find it.

See config.mk

Best regards,

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There are no data that cannot be plotted on a straight  line  if  the
axis are chosen correctly.
#6 lore raw
In reply to Michael Trimarchi
Quoted 2 lines · In message <[email protected]> you wrote:

I think that your version of gas doesn't support the -g option without specifing the debugging info format.

Resp. his version of GCC driver does not pass the correct options to as.

BTW: please don't top-post/full quote.
See http://www.netmeister.org/news/learn2quote.html

Best regards,

Wolfgang Denk

Signature · 3 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The only perfect science is hind-sight.
#7 lore raw
Quoted 13 lines · Wolfgang Denk
Quoted 4 lines · In message <[email protected]> you wrote:

I think that your version of gas doesn't support the -g option without specifing the debugging info format.

Resp. his version of GCC driver does not pass the correct options to as.

Quoted 2 lines

powerpc-unknown-linux-gnu-gcc -Wa,-g -D__ASSEMBLY__ -g -Os -fPIC -ffixed-r14 -meabi -D__KERNEL__ -DTEXT_BASE=0xFE000000 -I/temp/u-boot.i2c/include -fno-builtin -ffreestanding -nostdinc -isystem

It seems a problem with the -Wa,-g

Quoted 4 lines

BTW: please don't top-post/full quote.
See http://www.netmeister.org/news/learn2quote.html

I'll do
Thanks

Quoted 6 lines

Best regards,

Wolfgang Denk

Regards,
Michael