[Fwd: promise-sata-pata, No release code PATA port on Promise PDC20579, TODO?]
hi,
got a msi neo-2 fir now, cause nforce4 is incompatible with scsi+2xdvb on its pci.
like to use the PATA port of PDC20579 SATA II 150.
pls list TODOs and outstanding issues blocking the release.
some testcases for me?
y
tom
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 24 lines · thomas schorpp
------------------------------------------------------------------------
Subject:
promise-sata-pata, No release code PATA port on Promise PDC20579, TODO? From:
thomas schorpp <[email protected]>
Date:
Fri, 10 Nov 2006 14:41:53 +0100
To:
Linux SCSI list <[email protected]>To:
Linux SCSI list <[email protected]>hi,
got a msi neo-2 fir now, cause nforce4 is incompatible with scsi+2xdvb on its pci.
like to use the PATA port of PDC20579 SATA II 150.
pls list TODOs and outstanding issues blocking the release.
Quoted 10 lines
some testcases for me?
y
tom
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
no support at all for this chip's PATA in libata-dev.git:
ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 21
ata1: SATA max UDMA/133 cmd 0xE0EE4200 ctl 0xE0EE4238 bmdma 0x0 irq 21
ata2: SATA max UDMA/133 cmd 0xE0EE4280 ctl 0xE0EE42B8 bmdma 0x0 irq 21 scsi1 : sata_promise
ata1: SATA link down (SStatus 0 SControl 300)
scsi2 : sata_promise
ata2: SATA link down (SStatus 0 SControl 300)
sata_promise: loaded successfully
ohci1394: already loaded
ata_generic: loaded successfully
pata_via: loaded successfully
but it is mentioned in source, some hints to enable it, pls.
thx,
y
tom
Quoted 52 lines · thomas schorpp
Quoted 24 lines · thomas schorpp
------------------------------------------------------------------------
Subject:
promise-sata-pata, No release code PATA port on Promise PDC20579, TODO? From:
thomas schorpp <[email protected]>
Date:
Fri, 10 Nov 2006 14:41:53 +0100
To:
Linux SCSI list <[email protected]>To:
Linux SCSI list <[email protected]>hi,
got a msi neo-2 fir now, cause nforce4 is incompatible with scsi+2xdvb on its pci.
like to use the PATA port of PDC20579 SATA II 150.
pls list TODOs and outstanding issues blocking the release.
Quoted 10 lines
some testcases for me?
y
tom
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.htmlno support at all for this chip's PATA in libata-dev.git:
ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 21
ata1: SATA max UDMA/133 cmd0xE0EE4200ctl0xE0EE4238bmdma0x0irq 21
ata2: SATA max UDMA/133 cmd0xE0EE4280ctl0xE0EE42B8bmdma0x0irq 21 scsi1 :sata_promise
ata1: SATA link down (SStatus 0 SControl 300)
scsi2 :sata_promise
ata2: SATA link down (SStatus 0 SControl 300)
sata_promise: loaded successfully
ohci1394: already loaded
ata_generic: loaded successfully
pata_via: loaded successfullybut it is mentioned in source, some hints to enable it, pls.
Quoted 9 lines
thx,
y
tom
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
thx for releasing (missed it), it's working, done great:
libata version 2.20 loaded.sata_promise 0000:00:0d.0: version 2.00
ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 17sata_promise PATA port found
ata1: SATA max UDMA/133 cmd 0xffffc20000022200 ctl 0xffffc20000022238 bmdma 0x0000000000000000 irq 17
ata2: SATA max UDMA/133 cmd 0xffffc20000022280 ctl 0xffffc200000222b8 bmdma 0x0000000000000000 irq 17
ata3: PATA max UDMA/133 cmd 0xffffc20000022300 ctl 0xffffc20000022338 bmdma 0x0000000000000000 irq 17 scsi1 : sata_promise
ata1: SATA link down (SStatus 0 SControl 300)
scsi2 : sata_promise
ata2: SATA link down (SStatus 0 SControl 300)
scsi3 : sata_promise
ata3.00: ATA-6: ST3120026A, 8.01, max UDMA/100
ata3.00: 234441648 sectors, multi 0: LBA48
ata3.00: configured for UDMA/100
scsi 3:0:0:0: Direct-Access ATA ST3120026A 8.01 PQ: 0 ANSI: 5
SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 3:0:0:0: Attached scsi disk sdb
sd 3:0:0:0: Attached scsi generic sg1 type 0
smartmontools and hddtemp are working, too.
i'll report if any issues or regression.
y
tom