RFC - platform device, IRQs and SoC devices
Hi there.
Im working on some SoC type devices attached to the system bus of my ARM devboard in an isa-like way.
The devices are small SoC (System On Chip) types, with one IRQ routed to the half dozen (sub)devices on board the SoC.
At present, I am using a platform driver for the 'core' which handles IRQ routing and device enumeration, and is currently passing the IRQ to be used by the subdevices in a struct resource (along with two or three IOMEM resources).
this, however means that the subdevice resource definitions must be copied in order that the IRQ field can be set dynamically.
One solution would be for there to be a method by which the subdevice can query the SoC core device for the base of its IRQ range, which would allow the subdevice data to be declared as a constant and not copied. This makes the declaration of the subdevices in the main driver very neat and compact.
can this be done with a 'platform device' or is this simply not possible?
the real problem seems (to me) to be that struct resource is held as an array. If it were a linked list, then I could hold all but the subdevice IRQ in const data and simply 'tack on' a single dynamically created IRQ resource to it.
I propose that a 'next' field be added to the struct resource. All existing code could remain the same for now, and continue to work, whilst newer device drivers could use the next-> field to taverse the list rather than treat it as an array.
if all 'linked' entries come before 'array style' ones, then the num_resources field would change to mean 'num_array_style_resources' and the last 'linked' type resource would point to the head of the array. The traversal routines would simply count the array offset from the first 'array style' entry (with a NULL next field) or, if num_resources is not set, assume all resources are linked, and the NULL ends the list of resources.
This would allow for both statically allocated const arrays of struct resource as we use now, and dynamically allocated resources, or a mix of both for the few weird cases like my problem above.
Summary:
add struct resource *next; to struct resource.
rename num_resources as resource_array_len to indicate it only counts the number of resources listed in an array
allow resources to be added dynamically by altering the pointer to the firts resource and using that resources next pointer to point to the old list head (OR) the old array head.
possible enhancements:
get_first_resource() - return first resource added, making it easy to locate the first array type entry (if present) remove_resource() - obvious, but perhaps not very useful.
Quoted 5 lines · Ian Molton
Hi there.
Im working on some SoC type devices attached to the system bus of my ARM devboard in an isa-like way.
The devices are small SoC (System On Chip) types, with one IRQ routed to the half dozen (sub)devices on board the SoC.
I just thought of a 'third way'.
let IRQchips have their own struct irq_desc and have subdevice IRQs start from 0.
since those IRQs can only be raised by the parent chip I think this ought to work, and would eliminated the problem of a fixed size irq array...
Quoted 9 lines · Ian Molton
Quoted 7 lines · Ian Molton
Hi there.
Im working on some SoC type devices attached to the system bus of my ARM devboard in an isa-like way.
The devices are small SoC (System On Chip) types, with one IRQ routed to the half dozen (sub)devices on board the SoC.
Quoted 7 lines
I just thought of a 'third way'.
let IRQchips have their own struct
irq_descand have subdevice IRQs start from 0.since those IRQs can only be raised by the parent chip I think this ought to work, and would eliminated the problem of a fixed size irq array...
It's quite possible to have:
IRQ chip
0 irqchip_0
1 irqchip_0
2 irqchip_1
3 irqchip_0
4 irqchip_0
5 irqchip_1
6 irqchip_2
7 irqchip_2
8 irqchip_2
9 irqchip_1
Where do you start '0' for each irqchip? How do you split the irq_desc array between the irqchips?
(and yes there are platforms merged which do this.)
Signature · 3 lines
Russell King Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/ maintainer of:
Quoted 15 lines · Russell King
It's quite possible to have:
IRQ chip
0irqchip_0
1irqchip_0
2irqchip_1
3irqchip_0
4irqchip_0
5irqchip_1
6irqchip_2
7irqchip_2
8irqchip_2
9irqchip_1
Quoted 2 lines
Where do you start '0' for each irqchip? How do you split the
irq_descarray between the irqchips?
I see no reason why this couldnt continue to work 'as is' with the new behaviour only applying to irqchips with their own non-NULL irq_desc array.
The other problem is integration with /proc, specifically the irq usage counter.
The irq numbers in /proc wouldnt have to be 'real' they can be synthesized from a base starting after the main system IRQs.
Im not sure how fixed the format of /proc/interrupts is, wether the IRQ numbers are required to be sequential or not (some arent even numbers like NMI on x86). if they dont have to be sequential then its simply a matter of keeping a counter starting from BOARD_IRQ_END+1 and for each IRQchip adding its individual irq numbers to it as they are displayed, then incrementing the counter by the size of the irqdesc array for that chip.
Quoted 15 lines · Ian Molton
Quoted 14 lines · Russell King
It's quite possible to have:
IRQ chip
0irqchip_0
1irqchip_0
2irqchip_1
3irqchip_0
4irqchip_0
5irqchip_1
6irqchip_2
7irqchip_2
8irqchip_2
9irqchip_1
Quoted 5 lines
Quoted 2 lines
Where do you start '0' for each irqchip? How do you split the
irq_descarray between the irqchips?I see no reason why this couldnt continue to work 'as is' with the new behaviour only applying to irqchips with their own non-NULL
irq_descarray.
That creates a multi-class system. Not nice from the maintainability aspect.
Nevertheless, please produce patches to demonstrate this idea in detail.
Quoted 2 lines
The other problem is integration with /proc, specifically the irq usage counter.
There's interrupt numbers elsewhere in procfs other than /proc/interrupts - eg, the /proc/stat "intr" line is just one example.
Signature · 3 lines
Russell King Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/ maintainer of: