Add MMC Password Protection (lock/unlock) support V7: mmc_sysfs.diff
RFC PATCH 4/5 Add MMC Password Protection (lock/unlock) support V7: mmc_sysfs.diff
Implement MMC password force erase, remove password, change password, unlock card and assign password operations. It uses the sysfs mechanism to send commands to the MMC subsystem.
drivers/mmc/mmc_sysfs.c +97 -0
@@ -17,6 +17,7 @@#include <linux/idr.h> #include <linux/workqueue.h> #include <linux/key.h> +#include <linux/err.h> #include <linux/mmc/card.h> #include <linux/mmc/host.h>
@@ -65,6 +66,94 @@ static struct device_attribute mmc_dev_astatic struct device_attribute mmc_dev_attr_scr =MMC_ATTR_RO (scr); +#ifdef CONFIG_MMC_PASSWORDS + +static ssize_t +mmc_lockable_show (struct device *dev,struct device_attribute *att,char *buf) +{ +struct mmc_card *card =dev_to_mmc_card (dev); + +if (!mmc_card_lockable (card)) +return sprintf (buf,"unsupported\n" ); +else +return sprintf (buf,"%slocked\n" ,mmc_card_locked (card) ? +"" :"un" ); +} + +/* +* implement MMC password functions: force erase, remove password, change +* password, unlock card and assign password. +*/ +static ssize_t +mmc_lockable_store (struct device *dev,struct device_attribute *att, +const char *data,size_t len) +{ +struct mmc_card *card =dev_to_mmc_card (dev); + +if (!mmc_card_lockable (card)) +return -EINVAL ; + +if (mmc_card_locked (card) && !strncmp (data,"erase" ,5 )) { +/* forced erase only works while card is locked */ +mmc_lock_unlock (card,NULL ,MMC_LOCK_MODE_ERASE ); +return len; + }else if (!mmc_card_locked (card) && !strncmp (data,"remove" ,6 )) { +/* remove password only works while card is unlocked */ +struct key *mmc_key =request_key (&mmc_key_type,"mmc:key" ,"remove" ); + +if (!IS_ERR (mmc_key)) { +int err =mmc_lock_unlock (card, mmc_key,MMC_LOCK_MODE_CLR_PWD ); +if (!err) +return len; + }else +dev_dbg (&card->dev,"request_key returned error %ld\n" ,PTR_ERR (mmc_key)); + }else if (!mmc_card_locked (card) && !strncmp (data,"change" ,6 )) { +/* change */ +struct key *mmc_key =request_key (&mmc_key_type,"mmc:key" ,"change" ); + +if (!IS_ERR (mmc_key)) { +int err =mmc_lock_unlock (card, mmc_key,MMC_LOCK_MODE_SET_PWD ); +if (!err) +return len; + }else +dev_dbg (&card->dev,"request_key returned error %ld\n" ,PTR_ERR (mmc_key)); + }else if (mmc_card_locked (card) && !strncmp (data,"unlock" ,6 )) { +/* unlock */ +struct key *mmc_key =request_key (&mmc_key_type,"mmc:key" ,"unlock" ); + +if (!IS_ERR (mmc_key)) { +int err =mmc_lock_unlock (card, mmc_key,MMC_LOCK_MODE_UNLOCK ); +if (err) { +dev_dbg (&card->dev,"Wrong password\n" ); + } +else { +device_release_driver (dev); +device_attach (dev); +return len; + } + }else +dev_dbg (&card->dev,"request_key returned error %ld\n" ,PTR_ERR (mmc_key)); + }else if (!mmc_card_locked (card) && !strncmp (data,"assign" ,6 )) { +/* assign */ +struct key *mmc_key =request_key (&mmc_key_type,"mmc:key" ,"assign" ); + +if (!IS_ERR (mmc_key)) { +int err =mmc_lock_unlock (card, mmc_key,MMC_LOCK_MODE_SET_PWD ); +if (!err) +return len; + }else +dev_dbg (&card->dev,"request_key returned error %ld\n" ,PTR_ERR (mmc_key)); + } + +return -EINVAL ; +} + +static struct device_attribute mmc_dev_attr_lockable = +__ATTR (lockable,S_IWUSR |S_IRUGO , + mmc_lockable_show, mmc_lockable_store); + +#endif +static void mmc_release_card (struct device *dev) {
@@ -234,6 +323,11 @@ int mmc_register_card(struct mmc_card *cif (ret)device_del (&card->dev); } +#ifdef CONFIG_MMC_PASSWORDS + ret =device_create_file (&card->dev, &mmc_dev_attr_lockable); +if (ret) +device_del (&card->dev); +#endif }return ret; }
@@ -248,6 +342,9 @@ void mmc_remove_card(struct mmc_card *caif (mmc_card_sd (card))device_remove_file (&card->dev, &mmc_dev_attr_scr); +#ifdef CONFIG_MMC_PASSWORDS +device_remove_file (&card->dev, &mmc_dev_attr_lockable); +#endif device_del (&card->dev); }
Patch looks ok. But I never got an answer what the difference between "change" and "assign" is.
Rgds
Signature · 5 lines
-- Pierre Ossman Linux kernel, MMC maintainer http://www.kernel.org PulseAudio, core developer http://pulseaudio.org rdesktop, core developer http://www.rdesktop.org
Hi Pierre,
Quoted 2 lines · ext Pierre Ossman
Patch looks ok. But I never got an answer what the difference between "change" and "assign" is.
You're right, the command is the same, but the difference is the password's length and password itself sent to the card.
According to MMC spec 4.1, when a password replacement is done, the length value (PWD_LEN) shall include both passwords, the old and the new one, and the password (PWD) shall include the old (currently) followed by the new password.
Best Regards,
Anderson Briglia
Quoted 6 lines · Anderson Briglia
Hi Pierre,
Quoted 2 lines · ext Pierre Ossman
Patch looks ok. But I never got an answer what the difference between "change" and "assign" is.
Quoted 8 lines
You're right, the command is the same, but the difference is the password's
length and password itself sent to the card.
According to MMC spec 4.1, when a password replacement is done, the length value
(PWD_LEN) shall include both passwords, the old and the new one, and the password
(PWD) shall include the old (currently) followed by the new password.
So shouldn't this be something that userspace handles?
Signature · 5 lines
-- Pierre Ossman Linux kernel, MMC maintainer http://www.kernel.org PulseAudio, core developer http://pulseaudio.org rdesktop, core developer http://www.rdesktop.org
Quoted 15 lines · ext Pierre Ossman
Quoted 5 lines · Anderson Briglia
Hi Pierre,
Quoted 2 lines · ext Pierre Ossman
Patch looks ok. But I never got an answer what the difference between "change" and "assign" is.
Quoted 8 lines
You're right, the command is the same, but the difference is the password's
length and password itself sent to the card.
According to MMC spec 4.1, when a password replacement is done, the length value
(PWD_LEN) shall include both passwords, the old and the new one, and the password
(PWD) shall include the old (currently) followed by the new password.
Quoted 2 lines
So shouldn't this be something that userspace handles?
I merged the code for "change" and "assign". But the action (returned from kernel to user space application continues as "change" and "assign" separately.
Anderson Briglia