Skip to contentSkip to conversation

2.6.19-rc5-mm1 progression

DISCUSSION Larry Finger 5 participants 8 messages Nov 24, 2006 – Dec 7, 2006

lore
Share & tools
lore
#0 lore raw

Since at least the 2.6.18 development kernels, my interactive sessions have sometimes been very sluggish whenever a cpu-intensive process is running. This has been so bad that the mouse is unresponsive. The system behaved as if it were swapping; however, swapfile usage is always 0. The system has 820 MB RAM. I have not reported this problem as I really couldn't quantify it due to its intermittent nature.

Recently, I needed to run 2.6.19-rc5-mm1 to check out a problem reported by a bcm43xx user. I found that even with a kernel build, a git pull, and a separate build running, the system was responsive for interactive tasks. I have not yet identified which of the -mm1 patches "fixes" the problem, but plan to do so. Is there the equivalent of 'git bisect' for the -mmX kernels?

Larry

#3 lore raw
Quoted 4 lines · Andrew Morton
Quoted 1 line · On Fri, 24 Nov 2006 17:36:27 +0100 "Benoit Boissinot" <[email protected]>…

On 11/24/06, Larry Finger <[email protected]> wrote:

Quoted 9 lines
Quoted 4 lines
Quoted 2 lines

Is there the equivalent of 'git bisect' for the -mmX kernels?

http://www.zip.com.au/~akpm/linux/patches/stuff/bisecting-mm-trees.txt

Please take the time to do that. Yours is an interesting report - I'm not aware of anything in there which was expected to cause a change of this mature.

I am in the process of isolating the patch. I was already a user of quilt so that part of the learning process was no problem.

Larry

#4 lore raw
In reply to Andrew Morton
Quoted 4 lines · Andrew Morton
Quoted 1 line · On Fri, 24 Nov 2006 17:36:27 +0100 "Benoit Boissinot" <[email protected]>…

On 11/24/06, Larry Finger <[email protected]> wrote:

Quoted 9 lines
Quoted 4 lines
Quoted 2 lines

Is there the equivalent of 'git bisect' for the -mmX kernels?

http://www.zip.com.au/~akpm/linux/patches/stuff/bisecting-mm-trees.txt

Please take the time to do that. Yours is an interesting report - I'm not aware of anything in there which was expected to cause a change of this mature.

There are at least two patches in 2.6.19-rc5-mm2 that make my system much more responsive for interactive jobs. The one that has the majority of the effect is:

radix-tree-rcu-lockless-readside.patch

I have not been able to isolate the second patch, which has the lesser effect. All I can say is that it occurred before the above patch in patches/series. This patch was tested against 2.6.19 and fixed most of the problem on that version.

Larry Finger

#5 lore raw
Quoted 15 lines · Larry Finger
Quoted 4 lines · Andrew Morton
Quoted 1 line · On Fri, 24 Nov 2006 17:36:27 +0100 "Benoit Boissinot" <[email protected]>…

On 11/24/06, Larry Finger <[email protected]> wrote:

Quoted 9 lines
Quoted 4 lines
Quoted 2 lines

Is there the equivalent of 'git bisect' for the -mmX kernels?

http://www.zip.com.au/~akpm/linux/patches/stuff/bisecting-mm-trees.txt

Please take the time to do that. Yours is an interesting report - I'm not aware of anything in there which was expected to cause a change of this mature.

Quoted 8 lines

There are at least two patches in 2.6.19-rc5-mm2 that make my system much more responsive for interactive jobs. The one that has the majority of the effect is:

radix-tree-rcu-lockless-readside.patch

I have not been able to isolate the second patch, which has the lesser effect. All I can say is that it occurred before the above patch in patches/series. This patch was tested against 2.6.19 and fixed most of the problem on that version.

Curious...

This patch introduces the direct pointer optimisation for single element radix trees and makes the radix tree safe to read in a lock-less manner which is not used -yet-. The only difference that that should have is that the elements are freed using rcu callback instead of directly.

/me puzzled how this has a large effect on interactivity.

Nick?

#6 lore raw
Quoted 20 lines · Peter Zijlstra
Quoted 13 lines · Larry Finger
Quoted 12 lines · Andrew Morton
Quoted 5 lines · On Fri, 24 Nov 2006 17:36:27 +0100 "Benoit Boissinot" <[email protected]>…
Quoted 2 lines · Larry Finger

Is there the equivalent of 'git bisect' for the -mmX kernels?

http://www.zip.com.au/~akpm/linux/patches/stuff/bisecting-mm-trees.txt

Please take the time to do that. Yours is an interesting report - I'm not aware of anything in there which was expected to cause a change of this mature.

Quoted 5 lines

There are at least two patches in 2.6.19-rc5-mm2 that make my system much more responsive for interactive jobs. The one that has the majority of the effect is:

radix-tree-rcu-lockless-readside.patch

I have not been able to isolate the second patch, which has the lesser effect. All I can say is that it occurred before the above patch in patches/series. This patch was tested against 2.6.19 and fixed most of the problem on that version.

Quoted 8 lines

Curious...

This patch introduces the direct pointer optimisation for single element radix trees and makes the radix tree safe to read in a lock-less manner which is not used -yet-. The only difference that that should have is that the elements are freed using rcu callback instead of directly.

/me puzzled how this has a large effect on interactivity.

I also wondered why this patch should have the effect as it didn't seem in an area that should be important. I did test it on both 2.6.19-rc5-mm2 and vanilla 2.6.19. In both cases, it made interactive response improve.

One single task that seems to have the biggest effect on my unpatched systems is the link step for a new kernel. I am assuming that this process calls for lots of virtual memory. One other characteristic of my system when it gets unresponsive is that kswapd is running regularly; however, I have never observed any swap file usage.

Larry

#7 lore raw
In reply to Peter Zijlstra
Quoted 11 lines · Peter Zijlstra
Quoted 5 lines · Larry Finger

There are at least two patches in 2.6.19-rc5-mm2 that make my system much more responsive for interactive jobs. The one that has the majority of the effect is:

radix-tree-rcu-lockless-readside.patch

I have not been able to isolate the second patch, which has the lesser effect. All I can say is that it occurred before the above patch in patches/series. This patch was tested against 2.6.19 and fixed most of the problem on that version.

Curious...

Quoted 8 lines

This patch introduces the direct pointer optimisation for single element radix trees and makes the radix tree safe to read in a lock-less manner which is not used -yet-. The only difference that that should have is that the elements are freed using rcu callback instead of directly.

/me puzzled how this has a large effect on interactivity.

Nick?

I have already got the direct data optimisation upstream. It might be possible that it is some interaction with the extra rcu callbacks going off... I don't know :\

Signature · 2 lines
SUSE Labs, Novell Inc.
Send instant messages to your online friends http://au.messenger.yahoo.com