2.6.18.3, sata dvd writer: can't watch dvd
Hi folks,
I've got a shiny new sata dvd writer: A Samsung SH-183A, most recent firmware SB01. Writing data DVDs is _lightning_ fast, but I cannot watch my css-encrypted movie DVDs, even with libdvdcss installed. If I try, then it becomes unresponsive. dmesg says:
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: (BMDMA stat 0x1)
ata2.00: tag 0 cmd 0xa0 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata2.00: failed to IDENTIFY (device reports illegal type, err_mask=0x0) ata2.00: revalidation failed (errno=-22)
ata2.00: disabled
ata2: EH complete
Buffer I/O error on device sr0, logical block 0
Buffer I/O error on device sr0, logical block 1
Buffer I/O error on device sr0, logical block 2
Buffer I/O error on device sr0, logical block 3
Buffer I/O error on device sr0, logical block 4
Buffer I/O error on device sr0, logical block 5
Buffer I/O error on device sr0, logical block 6
Buffer I/O error on device sr0, logical block 7
Buffer I/O error on device sr0, logical block 0
Buffer I/O error on device sr0, logical block 1
After that the DVD drive is dead, waiting for a reset. I tried this with 4 DVDs by now.
Watching my own DVD-Rs (created in a Philips HD recorder), or commercial DVDs without CSS (e.g. "True Lies") is no problem. The region code is set (2), of course.
Any idea? Unfortunately I cannot verify the drive in a proprietary runtime environment.
Many thanx in advance.
Regards
Harri
Quoted 31 lines · arald Dunkel
Hi folks,
I've got a shiny new sata dvd writer: A Samsung SH-183A, most recent firmware SB01. Writing data DVDs is _lightning_ fast, but I cannot watch my css-encrypted movie DVDs, even with libdvdcss installed. If I try, then it becomes unresponsive. dmesg says:
ata2.00: exception Emask
0x0SAct0x0SErr0x0action0x2frozen ata2.00: (BMDMA stat0x1)
ata2.00: tag 0 cmd0xa0Emask0x4stat0x40err0x0(timeout)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata2.00: failed to IDENTIFY (device reports illegal type, err_mask=0x0) ata2.00: revalidation failed (errno=-22)
ata2.00: disabled
ata2: EH complete
Buffer I/O error on device sr0, logical block 0
Buffer I/O error on device sr0, logical block 1
Buffer I/O error on device sr0, logical block 2
Buffer I/O error on device sr0, logical block 3
Buffer I/O error on device sr0, logical block 4
Buffer I/O error on device sr0, logical block 5
Buffer I/O error on device sr0, logical block 6
Buffer I/O error on device sr0, logical block 7
Buffer I/O error on device sr0, logical block 0
Buffer I/O error on device sr0, logical block 1After that the DVD drive is dead, waiting for a reset. I tried this with 4 DVDs by now.
Quoted 7 lines
Watching my own DVD-Rs (created in a Philips HD recorder), or commercial DVDs without CSS (e.g. "True Lies") is no problem. The region code is set (2), of course.
Any idea? Unfortunately I cannot verify the drive in a proprietary runtime environment.
If you use mplayer, please run it with '-v' and report what it says. Also, full dmesg will help.
Signature · 1 line
tejun