Skip to contentSkip to conversation

Add -option-rom option to allow loading of PCI option ROMs

PATCH In review Anthony Liguori 2 participants 3 messages Dec 27, 2006

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Add -option-rom option to allow loading of PCI option ROMs

Howdy,

The following patch adds an -option-rom option to allow loading of PCI option ROMs. This is useful for loading things like etherboot or VMI.

For instance, using an etherboot ROM[1] from http://rom-o-matic.net/, one can use the following command line to PXE boot QEMU:

qemu -hda ~/mydisk.img -option-rom ~/eb-5.4.2-winbond940.zrom

This is also useful for loading a VMI option ROM for experimenting with paravirtualization. Not terribly useful ATM of course.

BTW, I have another patch that would add the etherboot ROMs to the QEMU distribution for all the NICs and then plumb up -boot n to allow PXE booting. Is there any interest in a patch like this? This would increase the QEMU distribution size by 96k.

[1] http://rom-o-matic.net/5.4.2/build.php?version=5.4.2&F=&arch=i386&nic=ns830:winbond940%20--%20[0x1050,0x0940]&ofmt=Binary%20ROM%20Image(.zrom)&A=Get%20ROM

Regards,

Anthony Liguori

hw/pc.c +18 -1
diff -r 0a200f17f93e hw/pc.c
@@ -451,7 +451,7 @@ static void pc_init1(int ram_size, int v
 {
     char buf[1024];
     int ret, linux_boot, initrd_size, i;
-    unsigned long bios_offset, vga_bios_offset;
+    unsigned long bios_offset, vga_bios_offset, option_rom_offset;
     int bios_size, isa_bios_size;
     PCIBus *pci_bus;
     int piix3_devfn = -1;
@@ -518,6 +518,23 @@ static void pc_init1(int ram_size, int v
     cpu_register_physical_memory(0x100000 - isa_bios_size, 
                                  isa_bios_size, 
                                  (bios_offset + bios_size - isa_bios_size) | IO_MEM_ROM);
+
+    option_rom_offset = 0;
+    for (i = 0; i < nb_option_roms; i++) {
+	int offset = bios_offset + bios_size + option_rom_offset;
+	int size;
+
+	size = load_image(option_rom[i], phys_ram_base + offset);
+	if ((size + option_rom_offset) > 0x10000) {
+	    fprintf(stderr, "Too many option ROMS\n");
+	    exit(1);
+	}
+	cpu_register_physical_memory(0xd0000 + option_rom_offset,
+				     size, offset | IO_MEM_ROM);
+	option_rom_offset += size + 2047;
+	option_rom_offset -= (option_rom_offset % 2048);
+    }
+
     /* map all the bios at the top of memory */
     cpu_register_physical_memory((uint32_t)(-bios_size), 
                                  bios_size, bios_offset | IO_MEM_ROM);
qemu-doc.texi +4 -0
diff -r 0a200f17f93e qemu-doc.texi
@@ -325,6 +325,10 @@ Use it when installing Windows 2000 to a
 Use it when installing Windows 2000 to avoid a disk full bug. After
 Windows 2000 is installed, you no longer need this option (this option
 slows down the IDE transfers).
+
+@item -option-rom file
+Load the contents of file as an option ROM.  This option is useful to load
+things like EtherBoot.
 
 @end table
 
vl.c +22 -0
diff -r 0a200f17f93e vl.c
@@ -169,6 +169,8 @@ int fd_bootchk = 1;
 int fd_bootchk = 1;
 int no_reboot = 0;
 int daemonize = 0;
+const char *option_rom[MAX_OPTION_ROMS];
+int nb_option_roms;
 
 /***********************************************************/
 /* x86 ISA bus support */
@@ -6213,6 +6215,7 @@ void help(void)
 #ifndef _WIN32
 	   "-daemonize      daemonize QEMU after initializing\n"
 #endif
+	   "-option-rom rom load a file, rom, into the option ROM space\n"
            "\n"
            "During emulation, the following keys are useful:\n"
            "ctrl-alt-f      toggle full screen\n"
@@ -6295,6 +6298,7 @@ enum {
     QEMU_OPTION_no_reboot,
     QEMU_OPTION_daemonize,
     QEMU_OPTION_disk,
+    QEMU_OPTION_option_rom,
 };
 
 typedef struct QEMUOption {
@@ -6377,6 +6381,7 @@ const QEMUOption qemu_options[] = {
     { "no-acpi", 0, QEMU_OPTION_no_acpi },
     { "no-reboot", 0, QEMU_OPTION_no_reboot },
     { "daemonize", 0, QEMU_OPTION_daemonize },
+    { "option-rom", HAS_ARG, QEMU_OPTION_option_rom },
     { NULL },
 };
 
@@ -7130,6 +7135,14 @@ int main(int argc, char **argv)
 	    case QEMU_OPTION_daemonize:
 		daemonize = 1;
 		break;
+	    case QEMU_OPTION_option_rom:
+		if (nb_option_roms >= MAX_OPTION_ROMS) {
+		    fprintf(stderr, "Too many option ROMs\n");
+		    exit(1);
+		}
+		option_rom[nb_option_roms] = optarg;
+		nb_option_roms++;
+		break;
             }
         }
     }
@@ -7220,6 +7233,15 @@ int main(int argc, char **argv)
 
     /* init the memory */
     phys_ram_size = ram_size + vga_ram_size + bios_size;
+
+    for (i = 0; i < nb_option_roms; i++) {
+	int ret = get_image_size(option_rom[i]);
+	if (ret == -1) {
+	    fprintf(stderr, "Could not load option rom '%s'\n", option_rom[i]);
+	    exit(1);
+	}
+	phys_ram_size += ret;
+    }
 
     phys_ram_base = qemu_vmalloc(phys_ram_size);
     if (!phys_ram_base) {
vl.h +4 -0
diff -r 0a200f17f93e vl.h
@@ -153,6 +153,10 @@ extern int usb_enabled;
 extern int usb_enabled;
 extern int smp_cpus;
 extern int no_quit;
+
+#define MAX_OPTION_ROMS 16
+extern const char *option_rom[MAX_OPTION_ROMS];
+extern int nb_option_roms;
 
 /* XXX: make it dynamic */
 #if defined (TARGET_PPC) || defined (TARGET_SPARC64)
#1 lore raw

Hi,

OK for the -option-rom option. Later it would be better to handle it at the NIC level, but it is more complicated (some BIOS patches would be needed to remap the PCI ROM at the right address for example).

I think the -boot n option should be merged in QEMU too. Some people need it to make tests.

Regarding VMI, I began some work in this area with kqemu but I did not manage to find time to finish it (VMI in QEMU would enable to run Linux VMs with performance levels close to Xen at the expense of a patched kernel).

Regards,

Fabrice.

Quoted 161 lines · Anthony Liguori

Howdy,

The following patch adds an -option-rom option to allow loading of PCI option ROMs. This is useful for loading things like etherboot or VMI.

For instance, using an etherboot ROM[1] from http://rom-o-matic.net/, one can use the following command line to PXE boot QEMU:

qemu -hda ~/mydisk.img -option-rom ~/eb-5.4.2-winbond940.zrom

This is also useful for loading a VMI option ROM for experimenting with paravirtualization. Not terribly useful ATM of course.

BTW, I have another patch that would add the etherboot ROMs to the QEMU distribution for all the NICs and then plumb up -boot n to allow PXE booting. Is there any interest in a patch like this? This would increase the QEMU distribution size by 96k.

[1] http://rom-o-matic.net/5.4.2/build.php?version=5.4.2&F=&arch=i386&nic=ns830:winbond940%20--%20[0x1050,0x0940]&ofmt=Binary%20ROM%20Image(.zrom)&A=Get%20ROM

Regards,

Anthony Liguori

------------------------------------------------------------------------

diff -r 0a200f17f93e hw/pc.c

hw/pc.c +18 -1
@@ -451,7 +451,7 @@ static void pc_init1(int ram_size, int v
 {
     char buf[1024];
     int ret, linux_boot, initrd_size, i;
-    unsigned long bios_offset, vga_bios_offset;
+    unsigned long bios_offset, vga_bios_offset, option_rom_offset;
     int bios_size, isa_bios_size;
     PCIBus *pci_bus;
     int piix3_devfn = -1;
@@ -518,6 +518,23 @@ static void pc_init1(int ram_size, int v
     cpu_register_physical_memory(0x100000 - isa_bios_size, 
                                  isa_bios_size, 
                                  (bios_offset + bios_size - isa_bios_size) | IO_MEM_ROM);
+
+    option_rom_offset = 0;
+    for (i = 0; i < nb_option_roms; i++) {
+	int offset = bios_offset + bios_size + option_rom_offset;
+	int size;
+
+	size = load_image(option_rom[i], phys_ram_base + offset);
+	if ((size + option_rom_offset) > 0x10000) {
+	    fprintf(stderr, "Too many option ROMS\n");
+	    exit(1);
+	}
+	cpu_register_physical_memory(0xd0000 + option_rom_offset,
+				     size, offset | IO_MEM_ROM);
+	option_rom_offset += size + 2047;
+	option_rom_offset -= (option_rom_offset % 2048);
+    }
+
     /* map all the bios at the top of memory */
     cpu_register_physical_memory((uint32_t)(-bios_size), 
                                  bios_size, bios_offset | IO_MEM_ROM);

diff -r 0a200f17f93e qemu-doc.texi

qemu-doc.texi +4 -0
@@ -325,6 +325,10 @@ Use it when installing Windows 2000 to a
 Use it when installing Windows 2000 to avoid a disk full bug. After
 Windows 2000 is installed, you no longer need this option (this option
 slows down the IDE transfers).
+
+@item -option-rom file
+Load the contents of file as an option ROM.  This option is useful to load
+things like EtherBoot.
 
 @end table
 

diff -r 0a200f17f93e vl.c

vl.c +22 -0
@@ -169,6 +169,8 @@ int fd_bootchk = 1;
 int fd_bootchk = 1;
 int no_reboot = 0;
 int daemonize = 0;
+const char *option_rom[MAX_OPTION_ROMS];
+int nb_option_roms;
 
 /***********************************************************/
 /* x86 ISA bus support */
@@ -6213,6 +6215,7 @@ void help(void)
 #ifndef _WIN32
 	   "-daemonize      daemonize QEMU after initializing\n"
 #endif
+	   "-option-rom rom load a file, rom, into the option ROM space\n"
            "\n"
            "During emulation, the following keys are useful:\n"
            "ctrl-alt-f      toggle full screen\n"
@@ -6295,6 +6298,7 @@ enum {
     QEMU_OPTION_no_reboot,
     QEMU_OPTION_daemonize,
     QEMU_OPTION_disk,
+    QEMU_OPTION_option_rom,
 };
 
 typedef struct QEMUOption {
@@ -6377,6 +6381,7 @@ const QEMUOption qemu_options[] = {
     { "no-acpi", 0, QEMU_OPTION_no_acpi },
     { "no-reboot", 0, QEMU_OPTION_no_reboot },
     { "daemonize", 0, QEMU_OPTION_daemonize },
+    { "option-rom", HAS_ARG, QEMU_OPTION_option_rom },
     { NULL },
 };
 
@@ -7130,6 +7135,14 @@ int main(int argc, char **argv)
 	    case QEMU_OPTION_daemonize:
 		daemonize = 1;
 		break;
+	    case QEMU_OPTION_option_rom:
+		if (nb_option_roms >= MAX_OPTION_ROMS) {
+		    fprintf(stderr, "Too many option ROMs\n");
+		    exit(1);
+		}
+		option_rom[nb_option_roms] = optarg;
+		nb_option_roms++;
+		break;
             }
         }
     }
@@ -7220,6 +7233,15 @@ int main(int argc, char **argv)
 
     /* init the memory */
     phys_ram_size = ram_size + vga_ram_size + bios_size;
+
+    for (i = 0; i < nb_option_roms; i++) {
+	int ret = get_image_size(option_rom[i]);
+	if (ret == -1) {
+	    fprintf(stderr, "Could not load option rom '%s'\n", option_rom[i]);
+	    exit(1);
+	}
+	phys_ram_size += ret;
+    }
 
     phys_ram_base = qemu_vmalloc(phys_ram_size);
     if (!phys_ram_base) {

diff -r 0a200f17f93e vl.h

vl.h +4 -1
@@ -153,6 +153,10 @@ extern int usb_enabled;
 extern int usb_enabled;
 extern int smp_cpus;
 extern int no_quit;
+
+#define MAX_OPTION_ROMS 16
+extern const char *option_rom[MAX_OPTION_ROMS];
+extern int nb_option_roms;
 
 /* XXX: make it dynamic */
 #if defined (TARGET_PPC) || defined (TARGET_SPARC64)
 
 
------------------------------------------------------------------------

_______________________________________________
Qemu-devel mailing list
[email protected]
http://lists.nongnu.org/mailman/listinfo/qemu-devel

#2 lore raw
Quoted 3 lines · Fabrice Bellard

Hi,

OK for the -option-rom option. Later it would be better to handle it at the NIC level, but it is more complicated (some BIOS patches would be needed to remap the PCI ROM at the right address for example).

Ok.

Quoted 1 line

I think the -boot n option should be merged in QEMU too. Some people need it to make tests.

Okay, I'll post that patch.

Quoted 1 line

Regarding VMI, I began some work in this area with kqemu but I did not manage to find time to finish it (VMI in QEMU would enable to run Linux VMs with performance levels close to Xen at the expense of a patched kernel).

I had a VMI ROM working with an older version of VMI. I've got some time this week so I've been trying to do the same thing with the newer VMI spec.

I'd like to at least get a pass through ROM working and then start playing around with stuff like moving some of the device emulation into the ROM. This would be most useful for something like KVM where the PIO latency is a major bottleneck.

Eventually, it would be nice to use it to run the guest in ring 1 on bare metal of course. I do agree that with VMI QEMU should be competitive with Xen.

Regards,

Anthony Liguori

Quoted 4 lines

Regards,

Fabrice.