rt2x00_pci: Fix interrupt handler name (visible at /proc/interrupts)
PATCH 1/1 rt2x00_pci: Fix interrupt handler name (visible at /proc/interrupts)
Currently driver name is wrong. PCI device address is visible at /proc/interrupts instead of the name:
43: 124 0 0 0 PCI-MSI-edge rtsx_pci
44: 384 0 0 0 PCI-MSI-edge snd_hda_intel
45: 25096 0 0 0 PCI-MSI-edge 0000:01:00.0
^^^^^^^^^^^^So, pass the right name. rt2x00_ops->name contains KBUILD_MODNAME and good for that, so pass it.
Handler names will be "rt2500pci", "rt2500pci" etc.
Signed-off-by Kirill Tkhai <[email protected]>
CC Ivo van Doorn <[email protected]>
CC Gertjan van Wingerde <[email protected]>
CC Helmut Schaa <[email protected]>
--- drivers/net/wireless/rt2x00/rt2x00pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/rt2x00/rt2x00pci.c +1 -1
@@ -121,7 +121,7 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct rt2x00_ops *ops) rt2x00dev->ops = ops; rt2x00dev->hw = hw; rt2x00dev->irq = pci_dev->irq; - rt2x00dev->name =pci_name (pci_dev); + rt2x00dev->name = ops->name;if (pci_is_pcie (pci_dev))rt2x00_set_chip_intf (rt2x00dev,RT2X00_CHIP_INTF_PCIE );
Quoted 8 lines · Kirill Tkhai
Currently driver name is wrong. PCI device address is visible at
/proc/interruptsinstead of the name:43: 124 0 0 0 PCI-MSI-edge rtsx_pci 44: 384 0 0 0 PCI-MSI-edge snd_hda_intel 45: 25096 0 0 0 PCI-MSI-edge 0000:01:00.0 ^^^^^^^^^^^^
Quoted 4 lines
So, pass the right name.
rt2x00_ops->namecontainsKBUILD_MODNAMEand good for that, so pass it.Handler names will be "rt2500pci", "rt2500pci" etc.
Looks sane. I was afraid that is not possible to have two or more interrupts with the same name, but that's not true.
Stanislaw