CONFIG_PHYSICAL_ALIGN limited to 4M?
Good day.
A while ago it was remarked on list here that keeping the kernel 4M aligned physically might be a performance win if the added 1M (it normally loads at 1M) meant it would fit on one 4M aligned hugepage instead of 2 and since that time I've been doing such.
In fact, while I was at it, I ran the kernel at 16M; while admittedly a bit of a non-issue, having never experienced ZONE_DMA shortage, I am an ISA user on a >16M machine so this seemed to make sense -- no kernel eating up "precious" ISA-DMAable memory.
Recently CONFIG_PHYSICAL_START was replaced by CONFIG_PHYSICAL_ALIGN (commit e69f202d0a1419219198566e1c22218a5c71a9a6) and while 4M alignment is still possible, that's also the strictest alignment allowed meaning I can't load my (non-relocatable) kernel at 16M anymore.
If I just apply the following and set it to 16M, things seem to be working for me. Was there an important reason to limit the alignment to 4M, and if so, even on non relocatable kernels?
Rene.
arch/i386/Kconfig +1 -1
@@ -793,7 +793,7 @@ config RELOCATABLE config PHYSICAL_ALIGN hex "Alignment value to which kernel should be aligned" default "0x100000" - range 0x2000 0x400000 + range 0x2000 0x1000000 help This value puts the alignment restrictions on physical address where kernel is loaded and run from. Kernel is compiled for an
Quoted 12 lines · Rene Herman
Good day.
A while ago it was remarked on list here that keeping the kernel 4M aligned physically might be a performance win if the added 1M (it normally loads at 1M) meant it would fit on one 4M aligned hugepage instead of 2 and since that time I've been doing such.
In fact, while I was at it, I ran the kernel at 16M; while admittedly a bit of a non-issue, having never experienced
ZONE_DMAshortage, I am an ISA user on a >16M machine so this seemed to make sense -- no kernel eating up "precious" ISA-DMAable memory.
Quoted 8 lines
Recently
CONFIG_PHYSICAL_STARTwas replaced byCONFIG_PHYSICAL_ALIGN(commite69f202d0a1419219198566e1c22218a5c71a9a6) and while 4M alignment is still possible, that's also the strictest alignment allowed meaning I can't load my (non-relocatable) kernel at 16M anymore.If I just apply the following and set it to 16M, things seem to be working for me. Was there an important reason to limit the alignment to 4M, and if so, even on non relocatable kernels?
Hi Rene,
Can't think of any reason why we can't keep alignment uppper limit to 16M. That time I had kept 4M as upper limit as that seemed to be only practical usage.
Rencetly I have restored back CONFIG_PHYSICAL_START option. That patch is still in -mm. IMHO, your case will fit more if we set CONFIG_PHYSICAL_START to 16M rather than increasing alignment upper limit for CONFIG_PHYSICAL_ALIGN.
Andrew, Can you please push this patch to 2.6.20-rc3?
Thanks
Vivek
Quoted 6 lines · Vivek Goyal
Rencetly I have restored back
CONFIG_PHYSICAL_STARToption. That patch is still in -mm. IMHO, your case will fit more if we setCONFIG_PHYSICAL_STARTto 16M rather than increasing alignment upper limit forCONFIG_PHYSICAL_ALIGN.
I agree. That matches the want better.
Quoted 1 line
Andrew, Can you please push this patch to 2.6.20-rc3?
No objections from me and it merely restores 2.6.19 functionality but also no great rush as far as I'm concerned. Can live with applying it manually for a release. See Xen was the original restoration reason; maybe they really want it in 2.6.20...
Thanks,
Rene