Load Balancing Problems
Hi,
I have a router that got its second link. I was trying to do load balancing, but i can not get it to work properly.
Just one link works at time, and is always the second in the command ip route add default table 222 proto static.
Am I missing something? My script is below. I am using Debian, tried with kernel 2.6.19 (my compilation) or debian's one (2.6.18-3-486), same results
Thanks
====================================ip rule add prio 50 table main ip route del default table main
ip rule add prio $PRIO1 from $NET1 table $PRIO1
ip route add default via $IPGW1 dev $INTERFACE1 src $IP1 proto static table $PRIO1
ip route append prohibit default table $PRIO1 metric 1 proto static
ip rule add prio $PRIO2 from $NET2 table $PRIO2
ip route add default via $IPGW2 dev $INTERFACE2 src $IP2 proto static table $PRIO2
ip route append prohibit default table $PRIO2 metric 1 proto static
ip rule add prio 222 table 222
ip route add default table 222 proto static \
nexthop via $IPGW1 dev $INTERFACE1 weight $WE1 \
nexthop via $IPGW2 dev $INTERFACE2 weight $WE2
================================
Signature · 6 lines
Alan Romaniuc _______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
I am having with loadbalancing. I can get it working never....
I have this scenario:
INTRANET -------- (IP0, INTERFACE0) ROUTER (IP1,INTERFACE1) ----
NET1 --- (IPGW1) EXTRANET 1
|
|----(IP2,INTERFACE2) ---- NET2 --- (IPGW2) EXTRANET 2
I have a Debian box with debian kernel, and I have a my kernel too, ith patches from Julian's route patch page.
Here is my scritp... copied from lartc
==
ip route add $NET1 dev $INTERFACE1 src $IP1 table $TABLE1 ip route add default via $IPGW1 table $TABLE1
ip route add $NET2 dev $INTERFACE2 src $IP2 table $TABLE2 ip route add default via $IPGW2 table $TABLE2
ip route add $NET1 dev $INTERFACE1 src $IP1
ip route add $NET2 dev $INTERFACE2 src $IP2
#ip route add default via $IPGW1
ip rule add from $IP1 table $TABLE1
ip rule add from $IP2 table $TABLE2
# MAGIC LINE !!!!!!!!!!!!!!!!!!!!!!!
ip route add default scope global \
nexthop via $IPGW1 dev $INTERFACE1 weight $WE1 \
nexthop via $IPGW2 dev $INTERFACE2 weight $WE2
ip route add $NET0 dev $INTERFACE0 table $TABLE1
ip route add $NET2 dev $INTERFACE2 table $TABLE1
ip route add 127.0.0.0/8 dev lo table $TABLE1
ip route add $NET0 dev $INTERFACE0 table $TABLE2
ip route add $NET1 dev $INTERFACE1 table $TABLE2
ip route add 127.0.0.0/8 dev lo table $TABLE2
#Extra rule for cable router
if [ "$ROUTER1" ]; then
ip route add $ROUTER1 dev $INTERFACE1 src $IP1
fi
===
with this script, I am getting always rooted using the second gateway from "MAGIC LINE", with am i doing a download (bittorrent for example) and redefine the routes (changing the first by the second) I can get a full download speedy (link1 + link2 bitrate) and both interface works normally. If I stop my torrent, flush the table, and start the download again, only the second link will work again, so load balancing never works...
here is some more debug information:
Quoted 1 line
Quoted 1 line
ip rule
0: from all lookup 255 32764: from 189.1.1.130 lookup uplink_e 32765: from 201.1.1.88 lookup uplink_v 32766: from all lookup main 32767: from all lookup default
Quoted 1 line
Quoted 1 line
ip route
192.168.100.1 dev eth_virtua scope link src 201.6.156.88 189.1.1.128/26 dev eth_embratel proto kernel scope link src 189.1.1.130 10.0.0.0/24 dev eth_wifi proto kernel scope link src 10.0.0.1 192.168.1.0/24 dev eth_intra1 proto kernel scope link src 192.168.1.1 201.1.1.0/24 dev eth_virtua proto kernel scope link src 201.1.1.88 default
nexthop via 201.1.1.1 dev eth_virtua weight 1
nexthop via 189.1.1.129 dev eth_embratel weight 1
Quoted 1 line
Quoted 1 line
Iptables (All ACCEPT)
$IPTABLES -t nat -A POSTROUTING -o $INTERFACE1 -j SNAT --to-source $IP1 $IPTABLES -t nat -A POSTROUTING -o $INTERFACE2 -j SNAT --to-source $IP2
Quoted 1 line
Quoted 1 line
rt_tables
#
# reserved values # 255 local 254 main 253 default 0 unspec # # local # #1 inr.ruhep 203 uplink_e 202 uplink_v
PS: Ip numbers are not real .... :/
Thanks in advance for any help;
Signature · 18 lines
Alan Romaniuc Phone : +55 11 5105-4955 Mobile : +55 11 8270-2520 [email protected] INTELIGENSA DO BRASIL Rua Quintana, 887, 5o. andar - Brooklin 04569-011 - São Paulo - SP - BRASIL www.inteligensa.com.br _______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 11 lines · Alan Romaniuc
Hi,
I have a router that got its second link. I was trying to do load balancing, but i can not get it to work properly.
Just one link works at time, and is always the second in the command ip route add default table 222 proto static.
Am I missing something? My script is below. I am using Debian, tried with kernel 2.6.19 (my compilation) or debian's one (2.6.18-3-486), same results
Try "your compilation" without CONFIG_IP_ROUTE_MULTIPATH_CACHED
there are several threads on this topic in the archive, one as reference:
http://archives.free.net.ph/message/20060618.150532.8a6cc07f.en.html
If it solves the problem, maybe is time to contact the author of Multipath Cached and send some report.
Signature · 5 lines
Luciano _______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Hi all,
After setting the CONFIG_IP_ROUTE_MULTIPATH_CACHED to no and apply patches from http://www.ssi.bg/~ja/#routes , everything is working fine. No more problems with the two uplinks and one route only.
Thanks for the help... I've been fighting with that for one week....
I will point this solution in another places too.
Thanks again,
Alan
Luciano Ruete escreveu:
Quoted 15 lines · Alan Romaniuc
Quoted 6 lines
Hi,
I have a router that got its second link. I was trying to do load balancing, but i can not get it to work properly.
Quoted 7 lines
Just one link works at time, and is always the second in the command ip route add default table 222 proto static.
Am I missing something? My script is below. I am using Debian, tried with kernel 2.6.19 (my compilation) or debian's one (2.6.18-3-486), same results
Quoted 8 lines
Try "your compilation" without
CONFIG_IP_ROUTE_MULTIPATH_CACHEDthere are several threads on this topic in the archive, one as reference:
http://archives.free.net.ph/message/20060618.150532.8a6cc07f.en.htmlIf it solves the problem, maybe is time to contact the author of Multipath Cached and send some report.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Hi ,
Are U test it for same remote site and same client ??
----- Original Message -----
From: "Alan Romaniuc" <[email protected]>
To: <[email protected]>
Sent: Wednesday, January 10, 2007 6:42 AM
Subject: Re: [LARTC] Load Balancing Problems
Quoted 53 lines
Hi all,
After setting the
CONFIG_IP_ROUTE_MULTIPATH_CACHEDto no and apply patches from http://www.ssi.bg/~ja/#routes , everything is working fine. No more problems with the two uplinks and one route only.Thanks for the help... I've been fighting with that for one week....
I will point this solution in another places too.
Thanks again,
Alan
Luciano Ruete escreveu:
Quoted 15 lines · Alan Romaniuc
Quoted 6 lines
Hi,
I have a router that got its second link. I was trying to do load balancing, but i can not get it to work properly.
Quoted 7 lines
Just one link works at time, and is always the second in the command ip route add default table 222 proto static.
Am I missing something? My script is below. I am using Debian, tried with kernel 2.6.19 (my compilation) or debian's one (2.6.18-3-486), same results
Quoted 8 lines
Try "your compilation" without
CONFIG_IP_ROUTE_MULTIPATH_CACHEDthere are several threads on this topic in the archive, one as reference:
http://archives.free.net.ph/message/20060618.150532.8a6cc07f.en.htmlIf it solves the problem, maybe is time to contact the author of Multipath Cached and send some report.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartcSignature · 3 lines
This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.
Signature · 8 lines
This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. _______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc