Skip to contentSkip to conversation

intel-hda, 965 chipset, STAC9227 - problem

DISCUSSION Ed Wright 1 participant 2 messages Jan 11, 2007 – Jan 15, 2007

lore
Share & tools
lore

Ed Wright

author
#0 lore raw

Hi,

With the following setup, sound does not seem to work:

kernel: 2.6.19
alsa (driver, lib, utils): 1.0.13
motherboard: Intel DG965
chipset: Intel® G965 Express Chipset
controller: ICH8
audio: 6-channel (5.1) audio subsystem using the SigmaTel STAC9227 audio codec

lspci output:
0000:00:1b.0 0403: 8086:284b (rev 02)
Subsystem: 8086:2113
Flags: bus master, fast devsel, latency 0, IRQ 20 Memory at 92320000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-

         Capabilities: [70] #10 [0091]

However if I boot from a Knoppix 5.0 CD, the sound does work (kernel: 2.6.17
alsa: 1.0.11rc4
codec: SigmaTel ID 7618)

I wonder if this is related to the issue referred to in the thread on
2006-10-26 "[PATCH] hda: add sigmatel dig mic support and refactor 9227"
- specifically about refactoring 9227. (As of 1.0.14rc1 this seems to be still outstanding...)

At any rate if there is a way to get this configuration working, I'd greatly appreciate the information. Alternatively, it seems that it might work with the generic driver (ala Knoppix), but I have not been able to figure out how to force that to load.

Thanks in advance,
Ed

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

author
#1 lore raw

Re: intel-hda, 965 chipset, STAC9227 - problem - resolved

Turns out the problem had nothing to do with my earlier guesses.

Running an strace on aplay showed that even though alsa-lib and alsa-utils were compiled/installed with the default "prefix" (/usr), the utilities were looking for alsa.conf, etc. under /usr/local for some reason.

Anyway, I symlinked the directory and all seems to be working.

Ed

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV