8349emds default dts updates for USB change
Subsystems (2)
PATCH 3/3 8349emds default dts updates for USB change
---arch/powerpc/boot/dts/mpc8349emds.dts | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
arch/powerpc/boot/dts/mpc8349emds.dts +0 -0
@@ -39,6 +39,11 @@
reg = <00000000 10000000>; // 256MB at 0 };
+ bcsr@f8000000 {
+ device_type = "board-control";
+ reg = <e2400000 8000>;
+ };
+
soc8349@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
@@ -103,6 +108,7 @@
#size-cells = <0>;
interrupt-parent = <700>;
interrupts = <26 2>;
+ dr_mode = "otg";
phy_type = "ulpi";
};Quoted 10 lines · Li Yang
Signed-off-by Li Yang <[email protected]>---
arch/powerpc/boot/dts/mpc8349emds.dts| 6 ++++++1 files changed, 6 insertions(+), 0 deletions(-)arch/powerpc/boot/dts/mpc8349emds.dts +0
-0
arch/powerpc/boot/dts/mpc8349emds.dts line 43
Quoted 5 lines
arch/powerpc/boot/dts/mpc8349emds.dts +3
-0@@ -39,6 +39,11 @@ reg = <00000000 10000000>; // 256MB at 0 }; + bcsr@f8000000 { + device_type = "board-control"; + reg = <e2400000 8000>;
Are the bcsr's at f8000000 or e2400000?
arch/powerpc/boot/dts/mpc8349emds.dts line 111
Quoted 10 lines
arch/powerpc/boot/dts/mpc8349emds.dts +3
-0+ }; + soc8349@e0000000 { #address-cells = <1>; #size-cells = <1>;@@ -103,6 +108,7 @@ #size-cells = <0>; interrupt-parent = <700>; interrupts = <26 2>; + dr_mode = "otg";
You're introducing a new property without any Documentation describing it.
arch/powerpc/boot/dts/mpc8349emds.dts line 113
Quoted 2 lines
arch/powerpc/boot/dts/mpc8349emds.dts +0
-0phy_type = "ulpi"; };
- k
Quoted 15 lines
-----Original Message-----
From: Kumar Gala [mailto:[email protected]]
Sent: Monday, February 05, 2007 11:07 PM
To: Li Yang-r58472
Cc: Paul; [email protected]
Subject: Re: [PATCH 3/3] 8349emds default dts updates for USB change =20
=20
On Feb 5, 2007, at 3:10 AM, Li Yang wrote:
=20Quoted 5 lines
Signed-off-by Li Yang <[email protected]>---
arch/powerpc/boot/dts/mpc8349emds.dts| 6 ++++++1 files changed, 6 insertions(+), 0 deletions(-)
Quoted 13 lines
arch/powerpc/boot/dts/mpc8349emds.dts line 43
Quoted 11 lines
arch/powerpc/ renamed from arch/powerpc/boot/dts/mpc8349emds.dts +0
-0
boot/dts/mpc8349emds.dts
index efceb34..ba31af1 100644arch/powerpc/boot/dts/mpc8349emds.dts +3
-0@@ -39,6 +39,11 @@ reg =3D <00000000 10000000>; // 256MB at 0 }; + bcsr@f8000000 { + device_type =3D "board-control"; + reg =3D <e2400000 8000>;=20
Are the bcsr's atf8000000ore2400000?
According to the default u-boot configuration in tree, it is e2400000.
- Leo
Quoted 29 lines · On Feb 5, 2007, at 9:17 PM, Li Yang-r58472 wrote:
Quoted 15 lines
-----Original Message-----
From: Kumar Gala [mailto:[email protected]]
Sent: Monday, February 05, 2007 11:07 PM
To: Li Yang-r58472
Cc: Paul; [email protected]
Subject: Re: [PATCH 3/3] 8349emds default dts updates for USB changeQuoted 5 lines · Li Yang
Signed-off-by Li Yang <[email protected]>---
arch/powerpc/boot/dts/mpc8349emds.dts| 6 ++++++1 files changed, 6 insertions(+), 0 deletions(-)Quoted 13 lines
arch/powerpc/boot/dts/mpc8349emds.dts line 43
Quoted 11 lines
arch/powerpc/ renamed from arch/powerpc/boot/dts/mpc8349emds.dts +0
-0
boot/dts/mpc8349emds.dts
index efceb34..ba31af1 100644arch/powerpc/boot/dts/mpc8349emds.dts +3
-0@@ -39,6 +39,11 @@ reg = <00000000 10000000>; // 256MB at 0 }; + bcsr@f8000000 { + device_type = "board-control"; + reg = <e2400000 8000>;Are the bcsr's at
f8000000ore2400000?
Quoted 1 line
According to the default u-boot configuration in tree, it is
e2400000.
Fine, so what is it bcsr@f8000000?
- k