OMAP1 realtime patch

Index: linux-osk/arch/arm/mach-omap2/gpmc.c
===================================================================
@@ -61,7 +61,7 @@
 
 static struct resource	gpmc_mem_root;
 static struct resource	gpmc_cs_mem[GPMC_CS_NUM];
-static spinlock_t	gpmc_mem_lock = SPIN_LOCK_UNLOCKED;
+static raw_spinlock_t	gpmc_mem_lock = SPIN_LOCK_UNLOCKED;
 static unsigned		gpmc_cs_map;
 
 static void __iomem *gpmc_base =

Index: linux-osk/arch/arm/plat-omap/debug-leds.c
===================================================================
@@ -34,7 +34,7 @@
  * one, or both.
  */
 
-static spinlock_t			lock;
+static raw_spinlock_t			lock;
 static struct h2p2_dbg_fpga __iomem	*fpga;
 static u16				led_state, hw_led_state;
 

Index: linux-osk/arch/arm/plat-omap/dma.c
===================================================================
@@ -62,7 +62,7 @@ struct omap_dma_lch {
 
 static int dma_chan_count;
 
-static spinlock_t dma_chan_lock;
+static raw_spinlock_t dma_chan_lock;
 static struct omap_dma_lch dma_chan[OMAP_LOGICAL_DMA_CH_COUNT];
 
 static const u8 omap1_dma_irq[OMAP_LOGICAL_DMA_CH_COUNT] = {

Index: linux-osk/arch/arm/plat-omap/dmtimer.c
===================================================================
@@ -129,7 +129,7 @@ static struct clk *dm_source_clocks[3];
 #endif
 
 static const int dm_timer_count = ARRAY_SIZE(dm_timers);
-static spinlock_t dm_timer_lock;
+static raw_spinlock_t dm_timer_lock;
 
 static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, int reg)
 {

Index: linux-osk/arch/arm/plat-omap/dsp/fifo.h
===================================================================
@@ -22,7 +22,7 @@
  */
 
 struct fifo_struct {
-	spinlock_t lock;
+	raw_spinlock_t lock;
 	char *buf;
 	size_t sz;
 	size_t cnt;

Index: linux-osk/arch/arm/plat-omap/dsp/ipbuf.h
===================================================================
@@ -79,15 +79,15 @@ extern struct ipbuf_sys *ipbuf_sys_da, *
 #define dsp_mem_disable_ipbuf()	dsp_mem_disable(ipbcfg.base)
 
 struct ipblink {
-	spinlock_t lock;
+	raw_spinlock_t lock;
 	u16 top;
 	u16 tail;
 };
 
-#define IPBLINK_INIT {				\
-		.lock = SPIN_LOCK_UNLOCKED,	\
-		.top  = BID_NULL,		\
-		.tail = BID_NULL,		\
+#define IPBLINK_INIT {				               \
+		.lock = RAW_SPIN_LOCK_UNLOCKED(ipb_free.lock), \
+		.top  = BID_NULL,		               \
+		.tail = BID_NULL,		               \
 	}
 
 #define INIT_IPBLINK(link)			\

Index: linux-osk/arch/arm/plat-omap/dsp/mblog.c
===================================================================
@@ -117,12 +117,12 @@ struct mblogent {
 };
 
 static struct {
-	spinlock_t lock;
+	raw_spinlock_t lock;
 	int wp;
 	unsigned long cnt, cnt_ad, cnt_da;
 	struct mblogent ent[MBLOG_DEPTH];
 } mblog = {
-	.lock = SPIN_LOCK_UNLOCKED,
+	.lock = RAW_SPIN_LOCK_UNLOCKED(mblog.lock),
 };
 
 #ifdef CONFIG_OMAP_DSP_MBCMD_VERBOSE

Index: linux-osk/arch/arm/plat-omap/dsp/proclist.h
===================================================================
@@ -27,8 +27,10 @@ struct proc_list {
 	struct file *file;
 };
 
-static __inline__ void proc_list_add(spinlock_t *lock, struct list_head *list,
-				     struct task_struct *tsk, struct file *file)
+static __inline__ void proc_list_add(raw_spinlock_t *lock,
+                                     struct list_head *list,
+                                     struct task_struct *tsk,
+                                     struct file *file)
 {
 	struct proc_list *new;
 

@@ -40,8 +42,10 @@ static __inline__ void proc_list_add(spi
 	spin_unlock(lock);
 }
 
-static __inline__ void proc_list_del(spinlock_t *lock, struct list_head *list,
-				     struct task_struct *tsk, struct file *file)
+static __inline__ void proc_list_del(raw_spinlock_t *lock,
+                                     struct list_head *list,
+				     struct task_struct *tsk,
+                                     struct file *file)
 {
 	struct proc_list *pl;
 

@@ -64,7 +68,8 @@ static __inline__ void proc_list_del(spi
 	spin_unlock(lock);
 }
 
-static __inline__ void proc_list_flush(spinlock_t *lock, struct list_head *list)
+static __inline__ void proc_list_flush(raw_spinlock_t *lock,
+                                       struct list_head *list)
 {
 	struct proc_list *pl;
 

Index: linux-osk/arch/arm/plat-omap/dsp/task.c
===================================================================
@@ -117,7 +117,7 @@ struct taskdev {
 	unsigned int usecount;
 	char name[TNM_LEN];
 	struct file_operations fops;
-	spinlock_t proc_list_lock;
+	raw_spinlock_t proc_list_lock;
 	struct list_head proc_list;
 	struct dsptask *task;
 

@@ -132,7 +132,7 @@ struct taskdev {
 	/* write stuff */
 	wait_queue_head_t write_wait_q;
 	struct mutex write_mutex;
-	spinlock_t wsz_lock;
+	raw_spinlock_t wsz_lock;
 	size_t wsz;
 
 	/* tctl stuff */

Index: linux-osk/arch/arm/plat-omap/mcbsp.c
===================================================================
@@ -61,7 +61,7 @@ struct omap_mcbsp {
 	struct completion            tx_dma_completion;
 	struct completion            rx_dma_completion;
 
-	spinlock_t                   lock;
+	raw_spinlock_t                   lock;
 };
 
 static struct omap_mcbsp mcbsp[OMAP_MAX_MCBSP_COUNT];

Index: linux-osk/drivers/input/touchscreen/ads7846.c
===================================================================
@@ -100,7 +100,7 @@ struct ads7846 {
 	u16			debounce_tol;
 	u16			debounce_rep;
 
-	spinlock_t		lock;
+	raw_spinlock_t		lock;
 	struct hrtimer		timer;
 	unsigned		pendown:1;	/* P: lock */
 	unsigned		pending:1;	/* P: lock */

@@ -454,7 +454,7 @@ static void ads7846_rx(void *ads)
 			ts->spi->dev.bus_id, ts->tc.ignore, Rt);
 #endif
 		hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD),
-			      HRTIMER_REL);
+			      HRTIMER_MODE_REL);
 		return;
 	}
 

@@ -473,7 +473,8 @@ static void ads7846_rx(void *ads)
 		ads7846_sync_events(ts);
 	}
 
-	hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD), HRTIMER_REL);
+	hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD),
+                                            HRTIMER_MODE_REL);
 }
 
 static int ads7846_debounce(void *ads, int data_idx, int *val)

@@ -558,7 +559,7 @@ static void ads7846_rx_val(void *ads)
 				status);
 }
 
-static int ads7846_timer(struct hrtimer *handle)
+static enum hrtimer_restart ads7846_timer(struct hrtimer *handle)
 {
 	struct ads7846	*ts = container_of(handle, struct ads7846, timer);
 	int		status = 0;

@@ -609,7 +610,7 @@ static irqreturn_t ads7846_irq(int irq, 
 			disable_irq(ts->spi->irq);
 			ts->pending = 1;
 			hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY),
-					HRTIMER_REL);
+					HRTIMER_MODE_REL);
 		}
 	}
 	spin_unlock_irqrestore(&ts->lock, flags);

@@ -747,7 +748,7 @@ static int __devinit ads7846_probe(struc
 	ts->input = input_dev;
 	ts->hwmon = hwmon;
 
-	hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_REL);
+	hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 	ts->timer.function = ads7846_timer;
 
 	spin_lock_init(&ts->lock);

Index: linux-osk/sound/arm/omap/omap-alsa-dma.c
===================================================================
@@ -56,6 +56,7 @@
 #include <linux/sysrq.h>
 #include <linux/interrupt.h>
 #include <linux/dma-mapping.h>
+#include <linux/spinlock_types.h>
 
 #include <asm/uaccess.h>
 #include <asm/io.h>

@@ -114,7 +115,7 @@
 
 /**************************** DATA STRUCTURES *****************************************/
 
-static spinlock_t dma_list_lock = SPIN_LOCK_UNLOCKED;
+static raw_spinlock_t dma_list_lock = RAW_SPIN_LOCK_UNLOCKED(dma_list_lock);
 
 static char nr_linked_channels = 1;
 

Index: linux-osk/include/asm-arm/arch-omap/mailbox.h
===================================================================
@@ -37,7 +37,7 @@ struct omap_mbox_ops {
 
 struct omap_mbox {
 	char *name;
-	spinlock_t lock;
+	raw_spinlock_t lock;
 	unsigned int irq;
 	struct omap_mbox_ops *ops;
 

Index: linux-osk/include/asm-arm/arch-omap/omap-alsa.h
===================================================================
@@ -83,7 +83,7 @@ struct audio_stream {
 	int active:1;		/* we are using this stream for transfer now */
 	int period;		/* current transfer period */
 	int periods;		/* current count of periods registerd in the DMA engine */
-	spinlock_t dma_lock;	/* for locking in DMA operations */
+	raw_spinlock_t dma_lock;	/* for locking in DMA operations */
 	snd_pcm_substream_t *stream;	/* the pcm stream */
 	unsigned linked:1;	/* dma channels linked */
 	int offset;		/* store start position of the last period in the alsa buffer */

Index: linux-osk/arch/arm/plat-omap/gpio.c
===================================================================
@@ -137,7 +137,7 @@ struct gpio_bank {
 	u32 saved_fallingdetect;
 	u32 saved_risingdetect;
 #endif
-	spinlock_t lock;
+	raw_spinlock_t lock;
 };
 
 #define METHOD_MPUIO		0

127 lines not on this page · raw message

122 lines not on this page · raw message

Index: linux-osk/arch/arm/plat-omap/common.c
===================================================================
@@ -212,7 +212,7 @@ static struct clocksource clocksource_32
 	.read		= omap_32k_read,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.shift		= 10,
-	.is_continuous	= 1,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
 static int __init omap_init_clocksource_32k(void)

Index: linux-osk/kernel/irq/manage.c
===================================================================
@@ -593,6 +593,7 @@ static void thread_simple_irq(irq_desc_t
 	unsigned int irq = desc - irq_desc;
 	irqreturn_t action_ret;
 
+	restart:
 	if (action && !desc->depth) {
 		spin_unlock(&desc->lock);
 		action_ret = handle_IRQ_event(irq, action);

@@ -601,6 +602,19 @@ static void thread_simple_irq(irq_desc_t
 		if (!noirqdebug)
 			note_interrupt(irq, desc, action_ret);
 	}
+
+	/*
+	 * Some boards will disable an interrupt when it
+	 * sets IRQ_PENDING . So we have to remove the flag
+	 * and re-enable to handle it.
+	 */
+	if (desc->status & IRQ_PENDING) {
+		desc->status &= ~IRQ_PENDING;
+		if (desc->chip)
+			desc->chip->enable(irq);
+		goto restart;
+	}
+
 	desc->status &= ~IRQ_INPROGRESS;
 }
 

Index: dev/arch/arm/mach-omap1/time.c
===================================================================
@@ -42,6 +42,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/clocksource.h>
+#include <linux/clockchips.h>
 
 #include <asm/system.h>
 #include <asm/hardware.h>

@@ -102,15 +103,33 @@ static inline unsigned long omap_mpu_tim
 	return timer->read_tim;
 }
 
-static inline void omap_mpu_timer_start(int nr, unsigned long load_val)
+static inline void omap_mpu_set_autoreset(int nr)
 {
 	volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
 
+	timer->cntl = timer->cntl | MPU_TIMER_AR;
+}
+
+static inline void omap_mpu_remove_autoreset(int nr)
+{
+	volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
+
+	timer->cntl = timer->cntl & ~MPU_TIMER_AR;
+}
+
+static inline void omap_mpu_timer_start(int nr, unsigned long load_val,
+					int autoreset)
+{
+	volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
+	unsigned int timerflags = (MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_ST);
+
+	if (autoreset) timerflags |= MPU_TIMER_AR;
+
 	timer->cntl = MPU_TIMER_CLOCK_ENABLE;
 	udelay(1);
 	timer->load_tim = load_val;
         udelay(1);
-	timer->cntl = (MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_AR | MPU_TIMER_ST);
+	timer->cntl = timerflags;
 }
 
 /*

@@ -118,12 +137,42 @@ static inline void omap_mpu_timer_start(
  * MPU timer 1 ... count down to zero, interrupt, reload
  * ---------------------------------------------------------------------------
  */
+static int omap_mpu_set_next_event(unsigned long cycles,
+				    struct clock_event_device *evt)
+{
+	omap_mpu_timer_start(0, cycles, 0);
+	return 0;
+}
+
+static void omap_mpu_set_mode(enum clock_event_mode mode,
+			      struct clock_event_device *evt)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		omap_mpu_set_autoreset(0);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		omap_mpu_remove_autoreset(0);
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		break;
+	}
+}
+
+static struct clock_event_device clockevent_mpu_timer1 = {
+	.name		= "mpu_timer1",
+	.features	= CLOCK_EVT_FEAT_PERIODIC, CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 32,
+	.set_next_event	= omap_mpu_set_next_event,
+	.set_mode	= omap_mpu_set_mode,
+};
+
 static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
 {
-	write_seqlock(&xtime_lock);
-	/* NOTE:  no lost-tick detection/handling! */
-	timer_tick();
-	write_sequnlock(&xtime_lock);
+	struct clock_event_device *evt = &clockevent_mpu_timer1;
+
+	evt->event_handler(evt);
 
 	return IRQ_HANDLED;
 }

@@ -139,7 +188,17 @@ static __init void omap_init_mpu_timer(u
 	set_cyc2ns_scale(rate / 1000);
 
 	setup_irq(INT_TIMER1, &omap_mpu_timer1_irq);
-	omap_mpu_timer_start(0, (rate / HZ) - 1);
+	omap_mpu_timer_start(0, (rate / HZ) - 1, 1);
+
+	clockevent_mpu_timer1.mult = div_sc(rate, NSEC_PER_SEC,
+					    clockevent_mpu_timer1.shift);
+	clockevent_mpu_timer1.max_delta_ns =
+		clockevent_delta2ns(-1, &clockevent_mpu_timer1);
+	clockevent_mpu_timer1.min_delta_ns =
+		clockevent_delta2ns(1, &clockevent_mpu_timer1);
+
+	clockevent_mpu_timer1.cpumask = cpumask_of_cpu(0);
+	clockevents_register_device(&clockevent_mpu_timer1);
 }
 
 /*

@@ -173,7 +232,7 @@ static struct clocksource clocksource_mp
 	.read		= mpu_read,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.shift		= 24,
-	.is_continuous	= 1,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
 static void __init omap_init_clocksource(unsigned long rate)

@@ -185,7 +244,7 @@ static void __init omap_init_clocksource
 		= clocksource_khz2mult(rate/1000, clocksource_mpu.shift);
 
 	setup_irq(INT_TIMER2, &omap_mpu_timer2_irq);
-	omap_mpu_timer_start(1, ~0);
+	omap_mpu_timer_start(1, ~0, 1);
 
 	if (clocksource_register(&clocksource_mpu))
 		printk(err, clocksource_mpu.name);

Index: dev/arch/arm/plat-omap/timer32k.c
===================================================================
@@ -43,6 +43,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/clocksource.h>
+#include <linux/clockchips.h>
 
 #include <asm/system.h>
 #include <asm/hardware.h>

@@ -210,23 +211,10 @@ unsigned long long sched_clock(void)
  */
 static inline irqreturn_t _omap_32k_timer_interrupt(int irq, void *dev_id)
 {
-	unsigned long now;
-
+	struct clock_event_device *evt = &clockevent_32k_timer;
 	omap_32k_timer_ack_irq();
-	now = omap_32k_sync_timer_read();
 
-	while ((signed long)(now - omap_32k_last_tick)
-						>= OMAP_32K_TICKS_PER_HZ) {
-		omap_32k_last_tick += OMAP_32K_TICKS_PER_HZ;
-		timer_tick();
-	}
-
-	/* Restart timer so we don't drift off due to modulo or dynamic tick.
-	 * By default we program the next timer to be continuous to avoid
-	 * latencies during high system load. During dynamic tick operation the
-	 * continuous timer can be overridden from pm_idle to be longer.
-	 */
-	omap_32k_timer_start(omap_32k_last_tick + OMAP_32K_TICKS_PER_HZ - now);
+	evt->event_handler(evt);
 
 	return IRQ_HANDLED;
 }

Index: dev/kernel/printk.c
===================================================================
@@ -464,6 +464,7 @@ static void zap_locks(void)
 	spin_lock_init(&logbuf_lock);
 	/* And make sure that we print immediately */
 	init_MUTEX(&console_sem);
+	zap_rt_locks();
 }
 
 static int printk_time = 0;

Index: dev/arch/arm/plat-omap/common.c
===================================================================
@@ -212,7 +212,7 @@ static struct clocksource clocksource_32
 	.read		= omap_32k_read,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.shift		= 10,
-	.is_continuous	= 1,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
 static int __init omap_init_clocksource_32k(void)

Index: dev/kernel/irq/manage.c
===================================================================
@@ -593,6 +593,7 @@ static void thread_simple_irq(irq_desc_t
 	unsigned int irq = desc - irq_desc;
 	irqreturn_t action_ret;
 
+	restart:
 	if (action && !desc->depth) {
 		spin_unlock(&desc->lock);
 		action_ret = handle_IRQ_event(irq, action);

@@ -601,6 +602,19 @@ static void thread_simple_irq(irq_desc_t
 		if (!noirqdebug)
 			note_interrupt(irq, desc, action_ret);
 	}
+
+	/*
+	 * Some boards will disable an interrupt when it
+	 * sets IRQ_PENDING . So we have to remove the flag
+	 * and re-enable to handle it.
+	 */
+	if (desc->status & IRQ_PENDING) {
+		desc->status &= ~IRQ_PENDING;
+		if (desc->chip)
+			desc->chip->enable(irq);
+		goto restart;
+	}
+
 	desc->status &= ~IRQ_INPROGRESS;
 }
 

Index: linux-osk/arch/arm/mach-omap1/time.c
===================================================================
@@ -42,6 +42,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/clocksource.h>
+#include <linux/clockchips.h>
 
 #include <asm/system.h>
 #include <asm/hardware.h>

@@ -102,15 +103,33 @@ static inline unsigned long omap_mpu_tim
 	return timer->read_tim;
 }
 
-static inline void omap_mpu_timer_start(int nr, unsigned long load_val)
+static inline void omap_mpu_set_autoreset(int nr)
 {
 	volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
 
+	timer->cntl = timer->cntl | MPU_TIMER_AR;
+}
+
+static inline void omap_mpu_remove_autoreset(int nr)
+{
+	volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
+
+	timer->cntl = timer->cntl & ~MPU_TIMER_AR;
+}
+
+static inline void omap_mpu_timer_start(int nr, unsigned long load_val,
+					int autoreset)
+{
+	volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
+	unsigned int timerflags = (MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_ST);
+
+	if (autoreset) timerflags |= MPU_TIMER_AR;
+
 	timer->cntl = MPU_TIMER_CLOCK_ENABLE;
 	udelay(1);
 	timer->load_tim = load_val;
         udelay(1);
-	timer->cntl = (MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_AR | MPU_TIMER_ST);
+	timer->cntl = timerflags;
 }
 
 /*

@@ -118,12 +137,42 @@ static inline void omap_mpu_timer_start(
  * MPU timer 1 ... count down to zero, interrupt, reload
  * ---------------------------------------------------------------------------
  */
+static int omap_mpu_set_next_event(unsigned long cycles,
+				    struct clock_event_device *evt)
+{
+	omap_mpu_timer_start(0, cycles, 0);
+	return 0;
+}
+
+static void omap_mpu_set_mode(enum clock_event_mode mode,
+			      struct clock_event_device *evt)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		omap_mpu_set_autoreset(0);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		omap_mpu_remove_autoreset(0);
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		break;
+	}
+}
+
+static struct clock_event_device clockevent_mpu_timer1 = {
+	.name		= "mpu_timer1",
+	.features	= CLOCK_EVT_FEAT_PERIODIC, CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 32,
+	.set_next_event	= omap_mpu_set_next_event,
+	.set_mode	= omap_mpu_set_mode,
+};
+
 static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
 {
-	write_seqlock(&xtime_lock);
-	/* NOTE:  no lost-tick detection/handling! */
-	timer_tick();
-	write_sequnlock(&xtime_lock);
+	struct clock_event_device *evt = &clockevent_mpu_timer1;
+
+	evt->event_handler(evt);
 
 	return IRQ_HANDLED;
 }

@@ -139,7 +188,17 @@ static __init void omap_init_mpu_timer(u
 	set_cyc2ns_scale(rate / 1000);
 
 	setup_irq(INT_TIMER1, &omap_mpu_timer1_irq);
-	omap_mpu_timer_start(0, (rate / HZ) - 1);
+	omap_mpu_timer_start(0, (rate / HZ) - 1, 1);
+
+	clockevent_mpu_timer1.mult = div_sc(rate, NSEC_PER_SEC,
+					    clockevent_mpu_timer1.shift);
+	clockevent_mpu_timer1.max_delta_ns =
+		clockevent_delta2ns(-1, &clockevent_mpu_timer1);
+	clockevent_mpu_timer1.min_delta_ns =
+		clockevent_delta2ns(1, &clockevent_mpu_timer1);
+
+	clockevent_mpu_timer1.cpumask = cpumask_of_cpu(0);
+	clockevents_register_device(&clockevent_mpu_timer1);
 }
 
 /*

@@ -173,7 +232,7 @@ static struct clocksource clocksource_mp
 	.read		= mpu_read,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.shift		= 24,
-	.is_continuous	= 1,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
 static void __init omap_init_clocksource(unsigned long rate)

@@ -185,7 +244,7 @@ static void __init omap_init_clocksource
 		= clocksource_khz2mult(rate/1000, clocksource_mpu.shift);
 
 	setup_irq(INT_TIMER2, &omap_mpu_timer2_irq);
-	omap_mpu_timer_start(1, ~0);
+	omap_mpu_timer_start(1, ~0, 1);
 
 	if (clocksource_register(&clocksource_mpu))
 		printk(err, clocksource_mpu.name);

Index: linux-osk/arch/arm/plat-omap/timer32k.c
===================================================================
@@ -43,6 +43,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/clocksource.h>
+#include <linux/clockchips.h>
 
 #include <asm/system.h>
 #include <asm/hardware.h>

@@ -210,23 +211,10 @@ unsigned long long sched_clock(void)
  */
 static inline irqreturn_t _omap_32k_timer_interrupt(int irq, void *dev_id)
 {
-	unsigned long now;
-
+	struct clock_event_device *evt = &clockevent_32k_timer;
 	omap_32k_timer_ack_irq();
-	now = omap_32k_sync_timer_read();
 
-	while ((signed long)(now - omap_32k_last_tick)
-						>= OMAP_32K_TICKS_PER_HZ) {
-		omap_32k_last_tick += OMAP_32K_TICKS_PER_HZ;
-		timer_tick();
-	}
-
-	/* Restart timer so we don't drift off due to modulo or dynamic tick.
-	 * By default we program the next timer to be continuous to avoid
-	 * latencies during high system load. During dynamic tick operation the
-	 * continuous timer can be overridden from pm_idle to be longer.
-	 */
-	omap_32k_timer_start(omap_32k_last_tick + OMAP_32K_TICKS_PER_HZ - now);
+	evt->event_handler(evt);
 
 	return IRQ_HANDLED;
 }

Index: linux-osk/arch/arm/plat-omap/common.c
===================================================================
@@ -212,7 +212,7 @@ static struct clocksource clocksource_32
 	.read		= omap_32k_read,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.shift		= 10,
-	.is_continuous	= 1,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
 static int __init omap_init_clocksource_32k(void)

Index: linux-osk/kernel/irq/manage.c
===================================================================
@@ -593,6 +593,7 @@ static void thread_simple_irq(irq_desc_t
 	unsigned int irq = desc - irq_desc;
 	irqreturn_t action_ret;
 
+	restart:
 	if (action && !desc->depth) {
 		spin_unlock(&desc->lock);
 		action_ret = handle_IRQ_event(irq, action);

@@ -601,6 +602,19 @@ static void thread_simple_irq(irq_desc_t
 		if (!noirqdebug)
 			note_interrupt(irq, desc, action_ret);
 	}
+
+	/*
+	 * Some boards will disable an interrupt when it
+	 * sets IRQ_PENDING . So we have to remove the flag
+	 * and re-enable to handle it.
+	 */
+	if (desc->status & IRQ_PENDING) {
+		desc->status &= ~IRQ_PENDING;
+		if (desc->chip)
+			desc->chip->enable(irq);
+		goto restart;
+	}
+
 	desc->status &= ~IRQ_INPROGRESS;
 }
 

Index: linux-osk/drivers/input/touchscreen/ads7846.c
===================================================================
@@ -454,7 +454,7 @@ static void ads7846_rx(void *ads)
 			ts->spi->dev.bus_id, ts->tc.ignore, Rt);
 #endif
 		hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD),
-			      HRTIMER_REL);
+			      HRTIMER_MODE_REL);
 		return;
 	}
 

@@ -473,7 +473,8 @@ static void ads7846_rx(void *ads)
 		ads7846_sync_events(ts);
 	}
 
-	hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD), HRTIMER_REL);
+	hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD),
+		      HRTIMER_MODE_REL);
 }
 
 static int ads7846_debounce(void *ads, int data_idx, int *val)

@@ -558,7 +559,7 @@ static void ads7846_rx_val(void *ads)
 				status);
 }
 
-static int ads7846_timer(struct hrtimer *handle)
+static enum hrtimer_restart ads7846_timer(struct hrtimer *handle)
 {
 	struct ads7846	*ts = container_of(handle, struct ads7846, timer);
 	int		status = 0;

@@ -609,7 +610,7 @@ static irqreturn_t ads7846_irq(int irq, 
 			disable_irq(ts->spi->irq);
 			ts->pending = 1;
 			hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY),
-					HRTIMER_REL);
+					HRTIMER_MODE_REL);
 		}
 	}
 	spin_unlock_irqrestore(&ts->lock, flags);

@@ -747,7 +748,7 @@ static int __devinit ads7846_probe(struc
 	ts->input = input_dev;
 	ts->hwmon = hwmon;
 
-	hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_REL);
+	hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 	ts->timer.function = ads7846_timer;
 
 	spin_lock_init(&ts->lock);

Index: linux-osk/arch/arm/mach-omap1/time.c
===================================================================
@@ -42,6 +42,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/clocksource.h>
+#include <linux/clockchips.h>
 
 #include <asm/system.h>
 #include <asm/hardware.h>

@@ -102,15 +103,33 @@ static inline unsigned long omap_mpu_tim
 	return timer->read_tim;
 }
 
-static inline void omap_mpu_timer_start(int nr, unsigned long load_val)
+static inline void omap_mpu_set_autoreset(int nr)
 {
 	volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
 
+	timer->cntl = timer->cntl | MPU_TIMER_AR;
+}
+
+static inline void omap_mpu_remove_autoreset(int nr)
+{
+	volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
+
+	timer->cntl = timer->cntl & ~MPU_TIMER_AR;
+}
+
+static inline void omap_mpu_timer_start(int nr, unsigned long load_val,
+					int autoreset)
+{
+	volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
+	unsigned int timerflags = (MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_ST);
+
+	if (autoreset) timerflags |= MPU_TIMER_AR;
+
 	timer->cntl = MPU_TIMER_CLOCK_ENABLE;
 	udelay(1);
 	timer->load_tim = load_val;
         udelay(1);
-	timer->cntl = (MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_AR | MPU_TIMER_ST);
+	timer->cntl = timerflags;
 }
 
 /*

@@ -118,12 +137,42 @@ static inline void omap_mpu_timer_start(
  * MPU timer 1 ... count down to zero, interrupt, reload
  * ---------------------------------------------------------------------------
  */
+static int omap_mpu_set_next_event(unsigned long cycles,
+				    struct clock_event_device *evt)
+{
+	omap_mpu_timer_start(0, cycles, 0);
+	return 0;
+}
+
+static void omap_mpu_set_mode(enum clock_event_mode mode,
+			      struct clock_event_device *evt)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		omap_mpu_set_autoreset(0);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		omap_mpu_remove_autoreset(0);
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		break;
+	}
+}
+
+static struct clock_event_device clockevent_mpu_timer1 = {
+	.name		= "mpu_timer1",
+	.features	= CLOCK_EVT_FEAT_PERIODIC, CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 32,
+	.set_next_event	= omap_mpu_set_next_event,
+	.set_mode	= omap_mpu_set_mode,
+};
+
 static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
 {
-	write_seqlock(&xtime_lock);
-	/* NOTE:  no lost-tick detection/handling! */
-	timer_tick();
-	write_sequnlock(&xtime_lock);
+	struct clock_event_device *evt = &clockevent_mpu_timer1;
+
+	evt->event_handler(evt);
 
 	return IRQ_HANDLED;
 }

@@ -139,7 +188,17 @@ static __init void omap_init_mpu_timer(u
 	set_cyc2ns_scale(rate / 1000);
 
 	setup_irq(INT_TIMER1, &omap_mpu_timer1_irq);
-	omap_mpu_timer_start(0, (rate / HZ) - 1);
+	omap_mpu_timer_start(0, (rate / HZ) - 1, 1);
+
+	clockevent_mpu_timer1.mult = div_sc(rate, NSEC_PER_SEC,
+					    clockevent_mpu_timer1.shift);
+	clockevent_mpu_timer1.max_delta_ns =
+		clockevent_delta2ns(-1, &clockevent_mpu_timer1);
+	clockevent_mpu_timer1.min_delta_ns =
+		clockevent_delta2ns(1, &clockevent_mpu_timer1);
+
+	clockevent_mpu_timer1.cpumask = cpumask_of_cpu(0);
+	clockevents_register_device(&clockevent_mpu_timer1);
 }
 
 /*

@@ -173,7 +232,7 @@ static struct clocksource clocksource_mp
 	.read		= mpu_read,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.shift		= 24,
-	.is_continuous	= 1,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
 static void __init omap_init_clocksource(unsigned long rate)

@@ -185,7 +244,7 @@ static void __init omap_init_clocksource
 		= clocksource_khz2mult(rate/1000, clocksource_mpu.shift);
 
 	setup_irq(INT_TIMER2, &omap_mpu_timer2_irq);
-	omap_mpu_timer_start(1, ~0);
+	omap_mpu_timer_start(1, ~0, 1);
 
 	if (clocksource_register(&clocksource_mpu))
 		printk(err, clocksource_mpu.name);

Index: linux-osk/arch/arm/plat-omap/timer32k.c
===================================================================
@@ -43,6 +43,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/clocksource.h>
+#include <linux/clockchips.h>
 
 #include <asm/system.h>
 #include <asm/hardware.h>

@@ -210,23 +211,10 @@ unsigned long long sched_clock(void)
  */
 static inline irqreturn_t _omap_32k_timer_interrupt(int irq, void *dev_id)
 {
-	unsigned long now;
-
+	struct clock_event_device *evt = &clockevent_32k_timer;
 	omap_32k_timer_ack_irq();
-	now = omap_32k_sync_timer_read();
 
-	while ((signed long)(now - omap_32k_last_tick)
-						>= OMAP_32K_TICKS_PER_HZ) {
-		omap_32k_last_tick += OMAP_32K_TICKS_PER_HZ;
-		timer_tick();
-	}
-
-	/* Restart timer so we don't drift off due to modulo or dynamic tick.
-	 * By default we program the next timer to be continuous to avoid
-	 * latencies during high system load. During dynamic tick operation the
-	 * continuous timer can be overridden from pm_idle to be longer.
-	 */
-	omap_32k_timer_start(omap_32k_last_tick + OMAP_32K_TICKS_PER_HZ - now);
+	evt->event_handler(evt);
 
 	return IRQ_HANDLED;
 }

Index: linux-osk/arch/arm/plat-omap/common.c
===================================================================
@@ -212,7 +212,7 @@ static struct clocksource clocksource_32
 	.read		= omap_32k_read,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.shift		= 10,
-	.is_continuous	= 1,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
 static int __init omap_init_clocksource_32k(void)

Index: linux-osk/kernel/irq/manage.c
===================================================================
@@ -593,6 +593,7 @@ static void thread_simple_irq(irq_desc_t
 	unsigned int irq = desc - irq_desc;
 	irqreturn_t action_ret;
 
+	restart:
 	if (action && !desc->depth) {
 		spin_unlock(&desc->lock);
 		action_ret = handle_IRQ_event(irq, action);

@@ -601,6 +602,19 @@ static void thread_simple_irq(irq_desc_t
 		if (!noirqdebug)
 			note_interrupt(irq, desc, action_ret);
 	}
+
+	/*
+	 * Some boards will disable an interrupt when it
+	 * sets IRQ_PENDING . So we have to remove the flag
+	 * and re-enable to handle it.
+	 */
+	if (desc->status & IRQ_PENDING) {
+		desc->status &= ~IRQ_PENDING;
+		if (desc->chip)
+			desc->chip->enable(irq);
+		goto restart;
+	}
+
 	desc->status &= ~IRQ_INPROGRESS;
 }
 

Index: linux-osk/drivers/input/touchscreen/ads7846.c
===================================================================
@@ -454,7 +454,7 @@ static void ads7846_rx(void *ads)
 			ts->spi->dev.bus_id, ts->tc.ignore, Rt);
 #endif
 		hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD),
-			      HRTIMER_REL);
+			      HRTIMER_MODE_REL);
 		return;
 	}
 

@@ -473,7 +473,8 @@ static void ads7846_rx(void *ads)
 		ads7846_sync_events(ts);
 	}
 
-	hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD), HRTIMER_REL);
+	hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD),
+		      HRTIMER_MODE_REL);
 }
 
 static int ads7846_debounce(void *ads, int data_idx, int *val)

@@ -558,7 +559,7 @@ static void ads7846_rx_val(void *ads)
 				status);
 }
 
-static int ads7846_timer(struct hrtimer *handle)
+static enum hrtimer_restart ads7846_timer(struct hrtimer *handle)
 {
 	struct ads7846	*ts = container_of(handle, struct ads7846, timer);
 	int		status = 0;

@@ -609,7 +610,7 @@ static irqreturn_t ads7846_irq(int irq, 
 			disable_irq(ts->spi->irq);
 			ts->pending = 1;
 			hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY),
-					HRTIMER_REL);
+					HRTIMER_MODE_REL);
 		}
 	}
 	spin_unlock_irqrestore(&ts->lock, flags);

@@ -747,7 +748,7 @@ static int __devinit ads7846_probe(struc
 	ts->input = input_dev;
 	ts->hwmon = hwmon;
 
-	hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_REL);
+	hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 	ts->timer.function = ads7846_timer;
 
 	spin_lock_init(&ts->lock);

Index: linux-osk/include/asm-arm/arch-omap/omap-alsa.h
===================================================================
@@ -83,7 +83,7 @@ struct audio_stream {
 	int active:1;		/* we are using this stream for transfer now */
 	int period;		/* current transfer period */
 	int periods;		/* current count of periods registerd in the DMA engine */
-	spinlock_t dma_lock;	/* for locking in DMA operations */
+	raw_spinlock_t dma_lock;	/* for locking in DMA operations */
 	snd_pcm_substream_t *stream;	/* the pcm stream */
 	unsigned linked:1;	/* dma channels linked */
 	int offset;		/* store start position of the last period in the alsa buffer */

Index: dev/include/asm-arm/arch-omap/omap-alsa.h
===================================================================
@@ -83,7 +83,7 @@ struct audio_stream {
 	int active:1;		/* we are using this stream for transfer now */
 	int period;		/* current transfer period */
 	int periods;		/* current count of periods registerd in the DMA engine */
-	raw_spinlock_t dma_lock;	/* for locking in DMA operations */
+	spinlock_t dma_lock;	/* for locking in DMA operations */
 	snd_pcm_substream_t *stream;	/* the pcm stream */
 	unsigned linked:1;	/* dma channels linked */
 	int offset;		/* store start position of the last period in the alsa buffer */

Index: dev/sound/arm/omap/omap-alsa.c
===================================================================
@@ -167,7 +167,6 @@ static void audio_stop_dma(struct audio_
 	unsigned long flags;
 	ADEBUG();
 
-	spin_lock_irqsave(&s->dma_lock, flags);
 	s->active = 0;
 	s->period = 0;
 	s->periods = 0;

@@ -176,8 +175,6 @@ static void audio_stop_dma(struct audio_
 	omap_stop_alsa_sound_dma(s);
 
 	omap_clear_alsa_sound_dma(s);
-
-	spin_unlock_irqrestore(&s->dma_lock, flags);
 }
 
 /*

Index: linux-osk/arch/arm/mach-omap1/time.c
===================================================================
@@ -42,6 +42,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/clocksource.h>
+#include <linux/clockchips.h>
 
 #include <asm/system.h>
 #include <asm/hardware.h>

@@ -102,15 +103,33 @@ static inline unsigned long omap_mpu_tim
 	return timer->read_tim;
 }
 
-static inline void omap_mpu_timer_start(int nr, unsigned long load_val)
+static inline void omap_mpu_set_autoreset(int nr)
 {
 	volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
 
+	timer->cntl = timer->cntl | MPU_TIMER_AR;
+}
+
+static inline void omap_mpu_remove_autoreset(int nr)
+{
+	volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
+
+	timer->cntl = timer->cntl & ~MPU_TIMER_AR;
+}
+
+static inline void omap_mpu_timer_start(int nr, unsigned long load_val,
+					int autoreset)
+{
+	volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
+	unsigned int timerflags = (MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_ST);
+
+	if (autoreset) timerflags |= MPU_TIMER_AR;
+
 	timer->cntl = MPU_TIMER_CLOCK_ENABLE;
 	udelay(1);
 	timer->load_tim = load_val;
         udelay(1);
-	timer->cntl = (MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_AR | MPU_TIMER_ST);
+	timer->cntl = timerflags;
 }
 
 /*

@@ -118,12 +137,42 @@ static inline void omap_mpu_timer_start(
  * MPU timer 1 ... count down to zero, interrupt, reload
  * ---------------------------------------------------------------------------
  */
+static int omap_mpu_set_next_event(unsigned long cycles,
+				    struct clock_event_device *evt)
+{
+	omap_mpu_timer_start(0, cycles, 0);
+	return 0;
+}
+
+static void omap_mpu_set_mode(enum clock_event_mode mode,
+			      struct clock_event_device *evt)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		omap_mpu_set_autoreset(0);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		omap_mpu_remove_autoreset(0);
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		break;
+	}
+}
+
+static struct clock_event_device clockevent_mpu_timer1 = {
+	.name		= "mpu_timer1",
+	.features	= CLOCK_EVT_FEAT_PERIODIC, CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 32,
+	.set_next_event	= omap_mpu_set_next_event,
+	.set_mode	= omap_mpu_set_mode,
+};
+
 static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
 {
-	write_seqlock(&xtime_lock);
-	/* NOTE:  no lost-tick detection/handling! */
-	timer_tick();
-	write_sequnlock(&xtime_lock);
+	struct clock_event_device *evt = &clockevent_mpu_timer1;
+
+	evt->event_handler(evt);
 
 	return IRQ_HANDLED;
 }

@@ -139,7 +188,17 @@ static __init void omap_init_mpu_timer(u
 	set_cyc2ns_scale(rate / 1000);
 
 	setup_irq(INT_TIMER1, &omap_mpu_timer1_irq);
-	omap_mpu_timer_start(0, (rate / HZ) - 1);
+	omap_mpu_timer_start(0, (rate / HZ) - 1, 1);
+
+	clockevent_mpu_timer1.mult = div_sc(rate, NSEC_PER_SEC,
+					    clockevent_mpu_timer1.shift);
+	clockevent_mpu_timer1.max_delta_ns =
+		clockevent_delta2ns(-1, &clockevent_mpu_timer1);
+	clockevent_mpu_timer1.min_delta_ns =
+		clockevent_delta2ns(1, &clockevent_mpu_timer1);
+
+	clockevent_mpu_timer1.cpumask = cpumask_of_cpu(0);
+	clockevents_register_device(&clockevent_mpu_timer1);
 }
 
 /*

@@ -173,7 +232,7 @@ static struct clocksource clocksource_mp
 	.read		= mpu_read,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.shift		= 24,
-	.is_continuous	= 1,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
 static void __init omap_init_clocksource(unsigned long rate)

@@ -185,7 +244,7 @@ static void __init omap_init_clocksource
 		= clocksource_khz2mult(rate/1000, clocksource_mpu.shift);
 
 	setup_irq(INT_TIMER2, &omap_mpu_timer2_irq);
-	omap_mpu_timer_start(1, ~0);
+	omap_mpu_timer_start(1, ~0, 1);
 
 	if (clocksource_register(&clocksource_mpu))
 		printk(err, clocksource_mpu.name);

Index: linux-osk/arch/arm/plat-omap/timer32k.c
===================================================================
@@ -43,6 +43,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/clocksource.h>
+#include <linux/clockchips.h>
 
 #include <asm/system.h>
 #include <asm/hardware.h>

@@ -210,23 +211,10 @@ unsigned long long sched_clock(void)
  */
 static inline irqreturn_t _omap_32k_timer_interrupt(int irq, void *dev_id)
 {
-	unsigned long now;
-
+	struct clock_event_device *evt = &clockevent_32k_timer;
 	omap_32k_timer_ack_irq();
-	now = omap_32k_sync_timer_read();
 
-	while ((signed long)(now - omap_32k_last_tick)
-						>= OMAP_32K_TICKS_PER_HZ) {
-		omap_32k_last_tick += OMAP_32K_TICKS_PER_HZ;
-		timer_tick();
-	}
-
-	/* Restart timer so we don't drift off due to modulo or dynamic tick.
-	 * By default we program the next timer to be continuous to avoid
-	 * latencies during high system load. During dynamic tick operation the
-	 * continuous timer can be overridden from pm_idle to be longer.
-	 */
-	omap_32k_timer_start(omap_32k_last_tick + OMAP_32K_TICKS_PER_HZ - now);
+	evt->event_handler(evt);
 
 	return IRQ_HANDLED;
 }

Index: linux-osk/arch/arm/plat-omap/common.c
===================================================================
@@ -212,7 +212,7 @@ static struct clocksource clocksource_32
 	.read		= omap_32k_read,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.shift		= 10,
-	.is_continuous	= 1,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
 static int __init omap_init_clocksource_32k(void)

Index: linux-osk/kernel/irq/manage.c
===================================================================
@@ -593,6 +593,7 @@ static void thread_simple_irq(irq_desc_t
 	unsigned int irq = desc - irq_desc;
 	irqreturn_t action_ret;
 
+	restart:
 	if (action && !desc->depth) {
 		spin_unlock(&desc->lock);
 		action_ret = handle_IRQ_event(irq, action);

@@ -601,6 +602,19 @@ static void thread_simple_irq(irq_desc_t
 		if (!noirqdebug)
 			note_interrupt(irq, desc, action_ret);
 	}
+
+	/*
+	 * Some boards will disable an interrupt when it
+	 * sets IRQ_PENDING . So we have to remove the flag
+	 * and re-enable to handle it.
+	 */
+	if (desc->status & IRQ_PENDING) {
+		desc->status &= ~IRQ_PENDING;
+		if (desc->chip)
+			desc->chip->enable(irq);
+		goto restart;
+	}
+
 	desc->status &= ~IRQ_INPROGRESS;
 }
 

Index: linux-osk/drivers/input/touchscreen/ads7846.c
===================================================================
@@ -454,7 +454,7 @@ static void ads7846_rx(void *ads)
 			ts->spi->dev.bus_id, ts->tc.ignore, Rt);
 #endif
 		hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD),
-			      HRTIMER_REL);
+			      HRTIMER_MODE_REL);
 		return;
 	}
 

@@ -473,7 +473,8 @@ static void ads7846_rx(void *ads)
 		ads7846_sync_events(ts);
 	}
 
-	hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD), HRTIMER_REL);
+	hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD),
+		      HRTIMER_MODE_REL);
 }
 
 static int ads7846_debounce(void *ads, int data_idx, int *val)

@@ -558,7 +559,7 @@ static void ads7846_rx_val(void *ads)
 				status);
 }
 
-static int ads7846_timer(struct hrtimer *handle)
+static enum hrtimer_restart ads7846_timer(struct hrtimer *handle)
 {
 	struct ads7846	*ts = container_of(handle, struct ads7846, timer);
 	int		status = 0;

@@ -609,7 +610,7 @@ static irqreturn_t ads7846_irq(int irq, 
 			disable_irq(ts->spi->irq);
 			ts->pending = 1;
 			hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY),
-					HRTIMER_REL);
+					HRTIMER_MODE_REL);
 		}
 	}
 	spin_unlock_irqrestore(&ts->lock, flags);

@@ -747,7 +748,7 @@ static int __devinit ads7846_probe(struc
 	ts->input = input_dev;
 	ts->hwmon = hwmon;
 
-	hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_REL);
+	hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 	ts->timer.function = ads7846_timer;
 
 	spin_lock_init(&ts->lock);

Index: linux-osk/sound/arm/omap/omap-alsa.c
===================================================================
@@ -167,7 +167,6 @@ static void audio_stop_dma(struct audio_
 	unsigned long flags;
 	ADEBUG();
 
-	spin_lock_irqsave(&s->dma_lock, flags);
 	s->active = 0;
 	s->period = 0;
 	s->periods = 0;

@@ -176,8 +175,6 @@ static void audio_stop_dma(struct audio_
 	omap_stop_alsa_sound_dma(s);
 
 	omap_clear_alsa_sound_dma(s);
-
-	spin_unlock_irqrestore(&s->dma_lock, flags);
 }
 
 /*