Skip to contentSkip to conversation

Problem with 2.6.20 and hostap_cs (Netgear MA401)

DISCUSSION David G Hamblen 1 participant 1 message Feb 14, 2007

lore
Share & tools
lore
#0 lore raw

I've got the ieee80211 and hostap code compiled as modules for my MA401 card, and the system locks up when I insert the card. No keyboard, no sysrq, no logs after reboot, no nothing. The same configuration works fine under 2.6.19.

If I first insert my old 3com 3c589 card, then eject it and rmmod the 3c589_cs module, the insertion of the MA401 works completely. Preloading the modules with insmod or modprobe doesn't help.

Was there a change in the pcmcia or networking initialization code between 2.6.19 and 2.6.20?

Here are the relevant modules.

#/sbin/lsmod

Module                  Size  Used by
ieee80211_crypt_wep     5248  0
hostap_cs              59220  3
hostap                110852  1 hostap_cs
ieee80211_crypt         5632  2 ieee80211_crypt_wep,hostap
...
pcmcia                 29280  1 hostap_cs
firmware_class          9664  1 pcmcia
yenta_socket           26892  4
...
rsrc_nonstatic         13248  1 yenta_socket
pcmcia_core            39056  4 \ hostap_cs,pcmcia,yenta_socket,rsrc_nonstatic