Skip to contentSkip to conversation

ata-piix ACPI errors

DISCUSSION Meelis Roos 4 participants 6 messages Feb 22, 2007

lore
Share & tools
lore
#0 lore raw

Testbooted 2.6.21-rc1+todays git on a PC with Intel 845 chipset and PATA HDD. Works fine but I now have these ACPI errors in dmesg, maybe someone is interested:

ata_piix 0000:00:1f.1: version 2.00ac7
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
scsi0 : ata_piix
ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c18edbf8), AE_AML_OPERAND_VALUE ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c18ed608), AE_AML_OPERAND_VALUE ata1.00: ATA-5: ST380021A, 3.19, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA
ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c18edbf8), AE_AML_OPERAND_VALUE ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c18ed608), AE_AML_OPERAND_VALUE ata1.00: configured for UDMA/100
scsi1 : ata_piix
ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c18edbf8), AE_AML_OPERAND_VALUE ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c18ed464), AE_AML_OPERAND_VALUE ata2.00: ATAPI, max UDMA/33
ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c18edbf8), AE_AML_OPERAND_VALUE ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c18ed464), AE_AML_OPERAND_VALUE ata2.00: configured for UDMA/33

scsi 0:0:0:0: Direct-Access     ATA      ST380021A        3.19 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM            _NEC     DV-5800B         G9H3 PQ: 0 ANSI: 5
Signature · 1 line
Meelis Roos ([email protected])
#1 lore raw
Quoted 3 lines · On Thu, 22 Feb 2007 15:29:42 +0200 (EET) Meelis Roos <[email protected]> wrote:

Testbooted 2.6.21-rc1+todays git on a PC with Intel 845 chipset and PATA HDD. Works fine but I now have these ACPI errors in dmesg, maybe someone is interested:

Not in those but again note that the cable detection is broken

Quoted 1 line

ata2.00: ATAPI, max UDMA/33

#2 lore raw
Quoted 3 lines

Not in those but again note that the cable detection is broken

Quoted 1 line

ata2.00: ATAPI, max UDMA/33

It shows UDMA/100 for HDD and UDMA/33 for DVD-ROM. Visual inspection confirms that this is correct - DVD-ROM has 40-pin cable and HDD has 80-pin one. So at least the result is not wrong.

ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15 ata1.00: ATA-5: ST380021A, 3.19, max UDMA/100
ata1.00: configured for UDMA/100
ata2.00: ATAPI, max UDMA/33
ata2.00: configured for UDMA/33

Should the ATAPI line contain UDMA/100 if 40-pin cable is present??

Signature · 1 line
Meelis Roos ([email protected])
#3 lore raw
Quoted 3 lines

It shows UDMA/100 for HDD and UDMA/33 for DVD-ROM. Visual inspection confirms that this is correct - DVD-ROM has 40-pin cable and HDD has 80-pin one. So at least the result is not wrong.

Ok sorry didn't realise this one had a genuine 40pin cable case, forgot the -mm message about limiting is only in -mm 8(

#4 lore raw
In reply to Meelis Roos
Quoted 7 lines · Meelis Roos
Quoted 3 lines

Not in those but again note that the cable detection is broken

Quoted 1 line

ata2.00: ATAPI, max UDMA/33

It shows UDMA/100 for HDD and UDMA/33 for DVD-ROM. Visual inspection confirms that this is correct - DVD-ROM has 40-pin cable and HDD has 80-pin one. So at least the result is not wrong.

But should not it do UDMA/66 then?

Jan

#5 lore raw
Quoted 7 lines · Jan Engelhardt
Quoted 4 lines · Meelis Roos
Quoted 3 lines

Not in those but again note that the cable detection is broken

Quoted 1 line

ata2.00: ATAPI, max UDMA/33

It shows UDMA/100 for HDD and UDMA/33 for DVD-ROM. Visual inspection confirms that this is correct - DVD-ROM has 40-pin cable and HDD has 80-pin one. So at least the result is not wrong.

But should not it do UDMA/66 then?

40-pin cable limits you to UDMA/33.

Jeff