: pcmcia - spot slave decode flaws (for testing)
PATCH 1/1 : pcmcia - spot slave decode flaws (for testing)
If you've got a CF adapter or PCMCIA disc which shows up twice in libata pata_pcmcia can you try this patch on top of the updates posted. It tries to spot when the slave is a mirror of the master and to fix up problems that causes.
drivers/ata/pata_pcmcia.c +34 -0
@@ -54,6 +54,39 @@dev_node_t node; }; +/** +* pcmcia_set_mode - PCMCIA specific mode setup +* @ap: Port +* @r_failed_dev: Return pointer for failed device +* +* Perform the tuning and setup of the devices and timings, which +* for PCMCIA is the same as any other controller. We wrap it however +* as we need to spot hardware with incorrect or missing master/slave +* decode, which alas is embarrassingly common in the PC world +*/ + +static int pcmcia_set_mode (struct ata_port *ap,struct ata_device **r_failed_dev) +{ +struct ata_device *master = &ap->device[0 ]; +struct ata_device *slave = &ap->device[1 ]; + +if (!ata_dev_enabled (master) || !ata_dev_enabled (slave)) +return ata_do_set_mode (ap, r_failed_dev); + +if (memcmp (master->id +ATA_ID_FW_REV , slave->id +ATA_ID_FW_REV , +ATA_ID_FW_REV_LEN +ATA_ID_PROD_LEN ) ==0 ) + { +/* Suspicious match, but could be two cards from +the same vendor - check serial */ +if (memcmp (master->id +ATA_ID_SERNO , slave->id +ATA_ID_SERNO , +ATA_ID_SERNO_LEN ) ==0 && master->id[ATA_ID_SERNO ] >>8 ) { +ata_dev_printk (slave,KERN_WARNING ,"is a ghost device, ignoring.\n" ); +ata_dev_disable (slave); + } + } +return ata_do_set_mode (ap, r_failed_dev); +} +static struct scsi_host_template pcmcia_sht = { .module =THIS_MODULE , .name =DRV_NAME ,
@@ -73,6 +106,7 @@ };static struct ata_port_operations pcmcia_port_ops = { + .set_mode = pcmcia_set_mode, .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read,
Quoted 35 lines · Alan
If you've got a CF adapter or PCMCIA disc which shows up twice in libata
pata_pcmciacan you try this patch on top of the updates posted. It tries to spot when the slave is a mirror of the master and to fix up problems that causes.Signed-off-by Alan Cox <[email protected]>diff -u --new-file --recursive --exclude-from
/usr/src/excludelinux.vanilla-2.6.20-mm2/drivers/ata/pata_pcmcia.clinux-2.6.20-mm2/drivers/ata/pata_pcmcia.cdrivers/ata/pata_pcmcia.c +21
-0@@ -54,6 +54,39 @@dev_node_t node; }; +/** +* pcmcia_set_mode - PCMCIA specific mode setup +* @ap: Port +* @r_failed_dev: Return pointer for failed device +* +* Perform the tuning and setup of the devices and timings, which +* for PCMCIA is the same as any other controller. We wrap it however +* as we need to spot hardware with incorrect or missing master/slave +* decode, which alas is embarrassingly common in the PC world +*/ + +static int pcmcia_set_mode (struct ata_port *ap,struct ata_device **r_failed_dev) +{ +struct ata_device *master = &ap->device[0 ]; +struct ata_device *slave = &ap->device[1 ]; + +if (!ata_dev_enabled (master) || !ata_dev_enabled (slave)) +return ata_do_set_mode (ap, r_failed_dev); + +if (memcmp (master->id +ATA_ID_FW_REV , slave->id +ATA_ID_FW_REV , +ATA_ID_FW_REV_LEN +ATA_ID_PROD_LEN ) ==0 )
drivers/ata/pata_pcmcia.c line 87
Quoted 10 lines
drivers/ata/pata_pcmcia.c +10
-0+ { +/* Suspicious match, but could be two cards from +the same vendor - check serial */ +if (memcmp (master->id +ATA_ID_SERNO , slave->id +ATA_ID_SERNO , +ATA_ID_SERNO_LEN ) ==0 && master->id[ATA_ID_SERNO ] >>8 ) { +ata_dev_printk (slave,KERN_WARNING ,"is a ghost device, ignoring.\n" ); +ata_dev_disable (slave); + } + } +return ata_do_set_mode (ap, r_failed_dev);
Code looks OK. Not applied due to "for testing" note.
General comment: it might be nice to do this in the core, just as a sanity check for a variety of problems, past, present and future.
Quoted 4 lines
Code looks OK. Not applied due to "for testing" note.
General comment: it might be nice to do this in the core, just as a sanity check for a variety of problems, past, present and future.
We tried that with old IDE and all hell broke loose. Lots of virtual disk stuff and raid volumes have non-unique serial numbers. We even found a case of identically serial numbered Maxtor drives.
It needs to stay in pcmcia, which is the only place we've seen the duplication.
Alan
Quoted 11 lines · Alan
Quoted 4 lines
Code looks OK. Not applied due to "for testing" note.
General comment: it might be nice to do this in the core, just as a sanity check for a variety of problems, past, present and future.
We tried that with old IDE and all hell broke loose. Lots of virtual disk stuff and raid volumes have non-unique serial numbers. We even found a case of identically serial numbered Maxtor drives.
It needs to stay in pcmcia, which is the only place we've seen the duplication.
I don't think the maxtor drives actually had duplicate serial numbers. They were coming back as "M0000000000000000000" or something like that to the limit of the strlen. It looked more like buffer corruption or something, and only happened with one or two people...
--eric