RAID0 to RAID5 upgrade
I have three drives, with some various partitions, currently set up like this.
drive0 drive1 drive2
hdb1 hdi1 hdk1
\_________RAID1________/
hdb2 hdi2 hdk2
unused \___RAID0____/
200GB 100GB x 2
hdi3 hdk3
\___unused___/
100GB x 2What I want to have is 3 x 200 = 400GB RAID5.
I would like to avoid copying 200GB of data to another machine and back if I can do the conversion. Since mdadm does handle --level= with grow, I assume I have to create another RAID0 from hd[ik]3, copy the data there, delete the array using hd[ik]2, create a new RAID5 to use hd[bik]2, copy the data from the temporary array to the new RAID5 array, delete the hd[ik]3 partitions, grow the hd[bik]2 partitions, grow the array, and if I didn't miss a step be done :-(
Is there a better way? Copy over a network or restore are going to be very slow.
Signature · 3 lines
bill davidsen <[email protected]> CTO TMR Associates, Inc Doing interesting things with small computers since 1979
Quoted 12 lines · Bill Davidsen
I have three drives, with some various partitions, currently set up like this.
drive0 drive1 drive2
hdb1 hdi1 hdk1
\_________RAID1________/hdb2 hdi2 hdk2
unused \___RAID0____/
200GB 100GB x 2
Quoted 7 lines
hdi3 hdk3 \___unused___/ 100GB x 2What I want to have is 3 x 200 = 400GB RAID5.
I would like to avoid copying 200GB of data to another machine and back
Can't you do the following:
* copy the data from raid0 to hdb2 ( raid0 <= hdb2 you can even do a dd)
* degrade raid1 to only contain drive0
* since you have all your data on drive0, wipe drive1 and drive2 clean, create a degraded raid5
* copy stuff from drive0 to the new array (enw fs as well I presume)
* resync the raid5 with drive0
Quoted 22 lines · Peter Rabbitson
Quoted 11 lines · Bill Davidsen
I have three drives, with some various partitions, currently set up like this.
drive0 drive1 drive2
hdb1 hdi1 hdk1
\_________RAID1________/hdb2 hdi2 hdk2
unused \___RAID0____/
200GB 100GB x 2Quoted 8 lines
hdi3 hdk3 \___unused___/ 100GB x 2What I want to have is 3 x 200 = 400GB RAID5.
I would like to avoid copying 200GB of data to another machine and back
Quoted 7 lines
Can't you do the following:
* copy the data from raid0 to hdb2 ( raid0 <= hdb2 you can even do a dd)
* degrade raid1 to only contain drive0
* since you have all your data on drive0, wipe drive1 and drive2 clean, create a degraded raid5
* copy stuff from drive0 to the new array (enw fs as well I presume)
* resync the raid5 with drive0
The RAID1 is "most critical" data, and would never voluntarily be degraded. And since I only want to combine hd[ij][23] I would have no reason to do that. Other than that, it seems possible, assuming that mdadm will actually create the degraded RAID5 array with enough room for the data.
I'm testing that now.
Signature · 3 lines
bill davidsen <[email protected]> CTO TMR Associates, Inc Doing interesting things with small computers since 1979