Skip to contentSkip to conversation

i2c: fsl_i2c: Fix style violations

PATCH RESEND New Mario Six 2 participants 12 messages Jan 15, 2018 – Feb 6, 2018 I2C

lore
Share & tools
lore

Mario Six

author
#0 lore raw

PATCH RESEND v2 1/6 i2c: fsl_i2c: Fix style violations

Fix some style violations in the fsl_i2c I2C driver, and use shorter type names for variables in some cases.

---

v1 -> v2:
None

---
 drivers/i2c/fsl_i2c.c | 111 +++++++++++++++++++++++++-------------------------
 1 file changed, 56 insertions(+), 55 deletions(-)
drivers/i2c/fsl_i2c.c +56 -55
index ff3dc25927..d957cf6286 100644
@@ -116,10 +116,10 @@ static const struct {
  *
  * The return value is the actual bus speed that is set.
  */
-static unsigned int set_i2c_bus_speed(const struct fsl_i2c_base *base,
-	unsigned int i2c_clk, unsigned int speed)
+static uint set_i2c_bus_speed(const struct fsl_i2c_base *base,
+			      uint i2c_clk, uint speed)
 {
-	unsigned short divider = min(i2c_clk / speed, (unsigned int)USHRT_MAX);
+	ushort divider = min(i2c_clk / speed, (uint)USHRT_MAX);
 
 	/*
 	 * We want to choose an FDR/DFSR that generates an I2C bus speed that
@@ -130,8 +130,8 @@ static unsigned int set_i2c_bus_speed(const struct fsl_i2c_base *base,
 #ifdef __PPC__
 	u8 dfsr, fdr = 0x31; /* Default if no FDR found */
 	/* a, b and dfsr matches identifiers A,B and C respectively in AN2919 */
-	unsigned short a, b, ga, gb;
-	unsigned long c_div, est_div;
+	ushort a, b, ga, gb;
+	ulong c_div, est_div;
 
 #ifdef CONFIG_FSL_I2C_CUSTOM_DFSR
 	dfsr = CONFIG_FSL_I2C_CUSTOM_DFSR;
@@ -151,18 +151,21 @@ static unsigned int set_i2c_bus_speed(const struct fsl_i2c_base *base,
 	for (ga = 0x4, a = 10; a <= 30; ga++, a += 2) {
 		for (gb = 0; gb < 8; gb++) {
 			b = 16 << gb;
-			c_div = b * (a + ((3*dfsr)/b)*2);
-			if ((c_div > divider) && (c_div < est_div)) {
-				unsigned short bin_gb, bin_ga;
+			c_div = b * (a + ((3 * dfsr) / b) * 2);
+			if (c_div > divider && c_div < est_div) {
+				ushort bin_gb, bin_ga;
 
 				est_div = c_div;
 				bin_gb = gb << 2;
 				bin_ga = (ga & 0x3) | ((ga & 0x4) << 3);
 				fdr = bin_gb | bin_ga;
 				speed = i2c_clk / est_div;
-				debug("FDR:0x%.2x, div:%ld, ga:0x%x, gb:0x%x, "
-				      "a:%d, b:%d, speed:%d\n",
-				      fdr, est_div, ga, gb, a, b, speed);
+
+				debug("FDR: 0x%.2x, ", fdr);
+				debug("div: %ld, ", est_div);
+				debug("ga: 0x%x, gb: 0x%x, ", ga, gb);
+				debug("a: %d, b: %d, speed: %d\n", a, b, speed);
+
 				/* Condition 2 not accounted for */
 				debug("Tr <= %d ns\n",
 				      (b - 3 * dfsr) * 1000000 /
@@ -174,13 +177,13 @@ static unsigned int set_i2c_bus_speed(const struct fsl_i2c_base *base,
 		if (a == 24)
 			a += 4;
 	}
-	debug("divider:%d, est_div:%ld, DFSR:%d\n", divider, est_div, dfsr);
-	debug("FDR:0x%.2x, speed:%d\n", fdr, speed);
+	debug("divider: %d, est_div: %ld, DFSR: %d\n", divider, est_div, dfsr);
+	debug("FDR: 0x%.2x, speed: %d\n", fdr, speed);
 #endif
 	writeb(dfsr, &base->dfsrr);	/* set default filter */
 	writeb(fdr, &base->fdr);	/* set bus speed */
 #else
-	unsigned int i;
+	uint i;
 
 	for (i = 0; i < ARRAY_SIZE(fsl_i2c_speed_map); i++)
 		if (fsl_i2c_speed_map[i].divider >= divider) {
@@ -197,7 +200,7 @@ static unsigned int set_i2c_bus_speed(const struct fsl_i2c_base *base,
 }
 
 #ifndef CONFIG_DM_I2C
-static unsigned int get_i2c_clock(int bus)
+static uint get_i2c_clock(int bus)
 {
 	if (bus)
 		return gd->arch.i2c2_clk;	/* I2C2 clock */
@@ -211,10 +214,11 @@ static int fsl_i2c_fixup(const struct fsl_i2c_base *base)
 	const unsigned long long timeout = usec2ticks(CONFIG_I2C_MBB_TIMEOUT);
 	unsigned long long timeval = 0;
 	int ret = -1;
-	unsigned int flags = 0;
+	uint flags = 0;
 
 #ifdef CONFIG_SYS_FSL_ERRATUM_I2C_A004447
-	unsigned int svr = get_svr();
+	uint svr = get_svr();
+
 	if ((SVR_SOC_VER(svr) == SVR_8548 && IS_SVR_REV(svr, 3, 1)) ||
 	    (SVR_REV(svr) <= CONFIG_SYS_FSL_A004447_SVR_REV))
 		flags = I2C_CR_BIT6;
@@ -263,7 +267,7 @@ static void __i2c_init(const struct fsl_i2c_base *base, int speed, int
 	/* Call board specific i2c bus reset routine before accessing the
 	 * environment, which might be in a chip on that bus. For details
 	 * about this problem see doc/I2C_Edge_Conditions.
-	*/
+	 */
 	i2c_init_board();
 #endif
 	writeb(0, &base->cr);		/* stop I2C controller */
@@ -286,8 +290,7 @@ static void __i2c_init(const struct fsl_i2c_base *base, int speed, int
 	}
 }
 
-static int
-i2c_wait4bus(const struct fsl_i2c_base *base)
+static int i2c_wait4bus(const struct fsl_i2c_base *base)
 {
 	unsigned long long timeval = get_ticks();
 	const unsigned long long timeout = usec2ticks(CONFIG_I2C_MBB_TIMEOUT);
@@ -300,8 +303,7 @@ i2c_wait4bus(const struct fsl_i2c_base *base)
 	return 0;
 }
 
-static inline int
-i2c_wait(const struct fsl_i2c_base *base, int write)
+static inline int i2c_wait(const struct fsl_i2c_base *base, int write)
 {
 	u32 csr;
 	unsigned long long timeval = get_ticks();
@@ -317,29 +319,29 @@ i2c_wait(const struct fsl_i2c_base *base, int write)
 		writeb(0x0, &base->sr);
 
 		if (csr & I2C_SR_MAL) {
-			debug("i2c_wait: MAL\n");
+			debug("%s: MAL\n", __func__);
 			return -1;
 		}
 
 		if (!(csr & I2C_SR_MCF))	{
-			debug("i2c_wait: unfinished\n");
+			debug("%s: unfinished\n", __func__);
 			return -1;
 		}
 
 		if (write == I2C_WRITE_BIT && (csr & I2C_SR_RXAK)) {
-			debug("i2c_wait: No RXACK\n");
+			debug("%s: No RXACK\n", __func__);
 			return -1;
 		}
 
 		return 0;
 	} while ((get_ticks() - timeval) < timeout);
 
-	debug("i2c_wait: timed out\n");
+	debug("%s: timed out\n", __func__);
 	return -1;
 }
 
-static inline int
-i2c_write_addr(const struct fsl_i2c_base *base, u8 dev, u8 dir, int rsta)
+static inline int i2c_write_addr(const struct fsl_i2c_base *base, u8 dev,
+				 u8 dir, int rsta)
 {
 	writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX
 	       | (rsta ? I2C_CR_RSTA : 0),
@@ -353,8 +355,8 @@ i2c_write_addr(const struct fsl_i2c_base *base, u8 dev, u8 dir, int rsta)
 	return 1;
 }
 
-static inline int
-__i2c_write_data(const struct fsl_i2c_base *base, u8 *data, int length)
+static inline int __i2c_write_data(const struct fsl_i2c_base *base, u8 *data,
+				   int length)
 {
 	int i;
 
@@ -368,8 +370,8 @@ __i2c_write_data(const struct fsl_i2c_base *base, u8 *data, int length)
 	return i;
 }
 
-static inline int
-__i2c_read_data(const struct fsl_i2c_base *base, u8 *data, int length)
+static inline int __i2c_read_data(const struct fsl_i2c_base *base, u8 *data,
+				  int length)
 {
 	int i;
 
@@ -399,9 +401,8 @@ __i2c_read_data(const struct fsl_i2c_base *base, u8 *data, int length)
 	return i;
 }
 
-static int
-__i2c_read(const struct fsl_i2c_base *base, u8 chip_addr, u8 *offset, int olen,
-	   u8 *data, int dlen)
+static int __i2c_read(const struct fsl_i2c_base *base, u8 chip_addr, u8 *offset,
+		      int olen, u8 *data, int dlen)
 {
 	int ret = -1; /* signal error */
 
@@ -447,9 +448,8 @@ __i2c_read(const struct fsl_i2c_base *base, u8 chip_addr, u8 *offset, int olen,
 	return -1;
 }
 
-static int
-__i2c_write(const struct fsl_i2c_base *base, u8 chip_addr, u8 *offset, int olen,
-	    u8 *data, int dlen)
+static int __i2c_write(const struct fsl_i2c_base *base, u8 chip_addr,
+		       u8 *offset, int olen, u8 *data, int dlen)
 {
 	int ret = -1; /* signal error */
 
@@ -471,10 +471,9 @@ __i2c_write(const struct fsl_i2c_base *base, u8 chip_addr, u8 *offset, int olen,
 	return -1;
 }
 
-static int
-__i2c_probe_chip(const struct fsl_i2c_base *base, uchar chip)
+static int __i2c_probe_chip(const struct fsl_i2c_base *base, uchar chip)
 {
-	/* For unknow reason the controller will ACK when
+	/* For unknown reason the controller will ACK when
 	 * probing for a slave with the same address, so skip
 	 * it.
 	 */
@@ -484,8 +483,8 @@ __i2c_probe_chip(const struct fsl_i2c_base *base, uchar chip)
 	return __i2c_read(base, chip, 0, 0, NULL, 0);
 }
 
-static unsigned int __i2c_set_bus_speed(const struct fsl_i2c_base *base,
-			unsigned int speed, int i2c_clk)
+static uint __i2c_set_bus_speed(const struct fsl_i2c_base *base,
+				uint speed, int i2c_clk)
 {
 	writeb(0, &base->cr);		/* stop controller */
 	set_i2c_bus_speed(base, i2c_clk, speed);
@@ -501,32 +500,30 @@ static void fsl_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd)
 		   get_i2c_clock(adap->hwadapnr), adap->hwadapnr);
 }
 
-static int
-fsl_i2c_probe_chip(struct i2c_adapter *adap, uchar chip)
+static int fsl_i2c_probe_chip(struct i2c_adapter *adap, uchar chip)
 {
 	return __i2c_probe_chip(i2c_base[adap->hwadapnr], chip);
 }
 
-static int
-fsl_i2c_read(struct i2c_adapter *adap, u8 chip_addr, uint offset, int olen,
-	     u8 *data, int dlen)
+static int fsl_i2c_read(struct i2c_adapter *adap, u8 chip_addr, uint offset,
+			int olen, u8 *data, int dlen)
 {
 	u8 *o = (u8 *)&offset;
+
 	return __i2c_read(i2c_base[adap->hwadapnr], chip_addr, &o[4 - olen],
 			  olen, data, dlen);
 }
 
-static int
-fsl_i2c_write(struct i2c_adapter *adap, u8 chip_addr, uint offset, int olen,
-	      u8 *data, int dlen)
+static int fsl_i2c_write(struct i2c_adapter *adap, u8 chip_addr, uint offset,
+			 int olen, u8 *data, int dlen)
 {
 	u8 *o = (u8 *)&offset;
+
 	return __i2c_write(i2c_base[adap->hwadapnr], chip_addr, &o[4 - olen],
 			   olen, data, dlen);
 }
 
-static unsigned int fsl_i2c_set_bus_speed(struct i2c_adapter *adap,
-					  unsigned int speed)
+static uint fsl_i2c_set_bus_speed(struct i2c_adapter *adap, uint speed)
 {
 	return __i2c_set_bus_speed(i2c_base[adap->hwadapnr], speed,
 				   get_i2c_clock(adap->hwadapnr));
@@ -562,12 +559,14 @@ static int fsl_i2c_probe_chip(struct udevice *bus, u32 chip_addr,
 			      u32 chip_flags)
 {
 	struct fsl_i2c_dev *dev = dev_get_priv(bus);
+
 	return __i2c_probe_chip(dev->base, chip_addr);
 }
 
-static int fsl_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
+static int fsl_i2c_set_bus_speed(struct udevice *bus, uint speed)
 {
 	struct fsl_i2c_dev *dev = dev_get_priv(bus);
+
 	return __i2c_set_bus_speed(dev->base, speed, dev->i2c_clk);
 }
 
@@ -600,6 +599,7 @@ static int fsl_i2c_ofdata_to_platdata(struct udevice *bus)
 static int fsl_i2c_probe(struct udevice *bus)
 {
 	struct fsl_i2c_dev *dev = dev_get_priv(bus);
+
 	__i2c_init(dev->base, dev->speed, dev->slaveadd, dev->i2c_clk,
 		   dev->index);
 	return 0;
@@ -613,7 +613,8 @@ static int fsl_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs)
 	memset(&dummy, 0, sizeof(struct i2c_msg));
 
 	/* We expect either two messages (one with an offset and one with the
-	 * actucal data) or one message (just data) */
+	 * actual data) or one message (just data)
+	 */
 	if (nmsgs > 2 || nmsgs == 0) {
 		debug("%s: Only one or two messages are supported.", __func__);
 		return -1;

--
2.11.0

author
#1 lore raw

PATCH RESEND v2 2/6 i2c: fsl_i2c: Remove inline declarations

Some functions in the fsl_i2c driver are declared as inline, even though they are quite large, which needlessly increases the size of the resulting binary.

This patch removes the inline declarations.

---

v1 -> v2:
None

---
 drivers/i2c/fsl_i2c.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/i2c/fsl_i2c.c +7 -7
index d957cf6286..a7f3ec472f 100644
@@ -303,7 +303,7 @@ static int i2c_wait4bus(const struct fsl_i2c_base *base)
 	return 0;
 }
 
-static inline int i2c_wait(const struct fsl_i2c_base *base, int write)
+static int i2c_wait(const struct fsl_i2c_base *base, int write)
 {
 	u32 csr;
 	unsigned long long timeval = get_ticks();
@@ -340,8 +340,8 @@ static inline int i2c_wait(const struct fsl_i2c_base *base, int write)
 	return -1;
 }
 
-static inline int i2c_write_addr(const struct fsl_i2c_base *base, u8 dev,
-				 u8 dir, int rsta)
+static int i2c_write_addr(const struct fsl_i2c_base *base, u8 dev,
+			  u8 dir, int rsta)
 {
 	writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX
 	       | (rsta ? I2C_CR_RSTA : 0),
@@ -355,8 +355,8 @@ static inline int i2c_write_addr(const struct fsl_i2c_base *base, u8 dev,
 	return 1;
 }
 
-static inline int __i2c_write_data(const struct fsl_i2c_base *base, u8 *data,
-				   int length)
+static int __i2c_write_data(const struct fsl_i2c_base *base, u8 *data,
+			    int length)
 {
 	int i;
 
@@ -370,8 +370,8 @@ static inline int __i2c_write_data(const struct fsl_i2c_base *base, u8 *data,
 	return i;
 }
 
-static inline int __i2c_read_data(const struct fsl_i2c_base *base, u8 *data,
-				  int length)
+static int __i2c_read_data(const struct fsl_i2c_base *base, u8 *data,
+			   int length)
 {
 	int i;
 

--
2.11.0

#2 lore raw

PATCH RESEND v2 2/6 i2c: fsl_i2c: Remove inline declarations

Hello Mario,

Am 15.01.2018 um 11:08 schrieb Mario Six:

Quoted 8 lines

Some functions in the fsl_i2c driver are declared as inline, even though they are quite large, which needlessly increases the size of the resulting binary.

This patch removes the inline declarations.

Quoted 8 lines

---

v1 -> v2:
None

---
  drivers/i2c/fsl_i2c.c | 14 +++++++-------
  1 file changed, 7 insertions(+), 7 deletions(-)

Applied to u-boot-i2c master

Thanks!

bye,
Heiko

Signature · 3 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs at denx.de
author
#3 lore raw

PATCH RESEND v2 3/6 i2c: fsl_i2c: Make live-tree compatible

In reply to Mario Six

Make the fsl_i2c driver compatible with a live device tree.

---

v1 -> v2:
None

---
 drivers/i2c/fsl_i2c.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)
drivers/i2c/fsl_i2c.c +6 -10
index a7f3ec472f..cb0f5ea233 100644
@@ -574,22 +574,18 @@ static int fsl_i2c_ofdata_to_platdata(struct udevice *bus)
 {
 	struct fsl_i2c_dev *dev = dev_get_priv(bus);
 	fdt_addr_t addr;
-	fdt_size_t size;
-	int node = dev_of_offset(bus);
 
-	addr = fdtdec_get_addr_size_auto_noparent(gd->fdt_blob, node, "reg", 0,
-						  &size, false);
+	addr = dev_read_u32_default(bus, "reg", -1);
 
-	dev->base = map_sysmem(CONFIG_SYS_IMMR + addr, size);
+	dev->base = map_sysmem(CONFIG_SYS_IMMR + addr, sizeof(struct fsl_i2c_base));
 
 	if (!dev->base)
 		return -ENOMEM;
 
-	dev->index = fdtdec_get_int(gd->fdt_blob, node, "cell-index", -1);
-	dev->slaveadd = fdtdec_get_int(gd->fdt_blob, node,
-				       "u-boot,i2c-slave-addr", 0x7f);
-	dev->speed = fdtdec_get_int(gd->fdt_blob, node, "clock-frequency",
-				    400000);
+	dev->index = dev_read_u32_default(bus, "cell-index", -1);
+	dev->slaveadd = dev_read_u32_default(bus, "u-boot,i2c-slave-addr",
+					     0x7f);
+	dev->speed = dev_read_u32_default(bus, "clock-frequency", 400000);
 
 	dev->i2c_clk = dev->index ? gd->arch.i2c2_clk : gd->arch.i2c1_clk;
 

--
2.11.0

#4 lore raw

PATCH RESEND v2 3/6 i2c: fsl_i2c: Make live-tree compatible

Hello Mario,

Am 15.01.2018 um 11:08 schrieb Mario Six:

Quoted 4 lines

Make the fsl_i2c driver compatible with a live device tree.

Quoted 8 lines

---

v1 -> v2:
None

---
  drivers/i2c/fsl_i2c.c | 16 ++++++----------
  1 file changed, 6 insertions(+), 10 deletions(-)

Applied to u-boot-i2c master

Thanks!

bye,
Heiko

Signature · 3 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs at denx.de
author
#5 lore raw

PATCH RESEND v2 4/6 i2c: ihs_i2c: Prepare DM conversion

In reply to Mario Six

Prepare the function interface of the ihs_i2c driver for DM conversion in a future patch.

While we're at it, fix some style violations, and make the code more readable.

---

v1 -> v2:
None

---
 drivers/i2c/ihs_i2c.c | 69 +++++++++++++++++++++++++++++----------------------
 1 file changed, 40 insertions(+), 29 deletions(-)
drivers/i2c/ihs_i2c.c +40 -29
index 29612e69fe..6fd016339c 100644
@@ -11,6 +11,7 @@
 #include <common.h>
 #include <i2c.h>
 #include <gdsys_fpga.h>
+#include <asm/unaligned.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -41,30 +42,38 @@ DECLARE_GLOBAL_DATA_PTR;
 #endif
 
 enum {
-	I2CINT_ERROR_EV = 1 << 13,
-	I2CINT_TRANSMIT_EV = 1 << 14,
-	I2CINT_RECEIVE_EV = 1 << 15,
+	I2CINT_ERROR_EV = BIT(13),
+	I2CINT_TRANSMIT_EV = BIT(14),
+	I2CINT_RECEIVE_EV = BIT(15),
 };
 
 enum {
+	I2CMB_READ = 0 << 10,
 	I2CMB_WRITE = 1 << 10,
+	I2CMB_1BYTE = 0 << 11,
 	I2CMB_2BYTE = 1 << 11,
+	I2CMB_DONT_HOLD_BUS = 0 << 13,
 	I2CMB_HOLD_BUS = 1 << 13,
 	I2CMB_NATIVE = 2 << 14,
 };
 
+enum {
+	I2COP_WRITE = 0,
+	I2COP_READ = 1,
+};
+
 static int wait_for_int(bool read)
 {
 	u16 val;
-	unsigned int ctr = 0;
+	uint ctr = 0;
 
 	I2C_GET_REG(interrupt_status, &val);
+	/* Wait until error or receive/transmit interrupt was raised */
 	while (!(val & (I2CINT_ERROR_EV
 	       | (read ? I2CINT_RECEIVE_EV : I2CINT_TRANSMIT_EV)))) {
 		udelay(10);
-		if (ctr++ > 5000) {
+		if (ctr++ > 5000)
 			return 1;
-		}
 		I2C_GET_REG(interrupt_status, &val);
 	}
 
@@ -76,10 +85,12 @@ static int ihs_i2c_transfer(uchar chip, uchar *buffer, int len, bool read,
 {
 	u16 val;
 
+	/* Clear interrupt status */
 	I2C_SET_REG(interrupt_status, I2CINT_ERROR_EV
 		     | I2CINT_RECEIVE_EV | I2CINT_TRANSMIT_EV);
 	I2C_GET_REG(interrupt_status, &val);
 
+	/* If we want to write and have data, write the bytes to the mailbox */
 	if (!read && len) {
 		val = buffer[0];
 
@@ -98,6 +109,7 @@ static int ihs_i2c_transfer(uchar chip, uchar *buffer, int len, bool read,
 	if (wait_for_int(read))
 		return 1;
 
+	/* If we want to read, get the bytes from the mailbox */
 	if (read) {
 		I2C_GET_REG(read_mailbox_ext, &val);
 		buffer[0] = val & 0xff;
@@ -108,55 +120,44 @@ static int ihs_i2c_transfer(uchar chip, uchar *buffer, int len, bool read,
 	return 0;
 }
 
-static int ihs_i2c_address(uchar chip, uint addr, int alen, bool hold_bus)
+static int ihs_i2c_address(uchar chip, u8 *addr, int alen, bool hold_bus)
 {
-	int shift = (alen-1) * 8;
-
 	while (alen) {
 		int transfer = min(alen, 2);
-		uchar buf[2];
 		bool is_last = alen <= transfer;
 
-		buf[0] = addr >> shift;
-		if (alen > 1)
-			buf[1] = addr >> (shift - 8);
-
-		if (ihs_i2c_transfer(chip, buf, transfer, false,
+		if (ihs_i2c_transfer(chip, addr, transfer, I2COP_WRITE,
 				     hold_bus ? false : is_last))
 			return 1;
 
-		shift -= 16;
 		alen -= transfer;
 	}
 
 	return 0;
 }
 
-static int ihs_i2c_access(struct i2c_adapter *adap, uchar chip, uint addr,
-			  int alen, uchar *buffer, int len, bool read)
+static int ihs_i2c_access(struct i2c_adapter *adap, uchar chip, u8 *addr,
+			  int alen, uchar *buffer, int len, int read)
 {
-	if (len <= 0)
-		return 1;
-
-	if (ihs_i2c_address(chip, addr, alen, len))
+	/* Don't hold the bus if length of data to send/receive is zero */
+	if (len <= 0 || ihs_i2c_address(chip, addr, alen, len))
 		return 1;
 
 	while (len) {
 		int transfer = min(len, 2);
+		bool is_last = len <= transfer;
 
 		if (ihs_i2c_transfer(chip, buffer, transfer, read,
-				     len <= transfer))
-			return 1;
+				     is_last))
+			return 2;
 
 		buffer += transfer;
-		addr += transfer;
 		len -= transfer;
 	}
 
 	return 0;
 }
 
-
 static void ihs_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
 {
 #ifdef CONFIG_SYS_I2C_INIT_BOARD
@@ -173,7 +174,7 @@ static int ihs_i2c_probe(struct i2c_adapter *adap, uchar chip)
 {
 	uchar buffer[2];
 
-	if (ihs_i2c_transfer(chip, buffer, 0, true, true))
+	if (ihs_i2c_transfer(chip, buffer, 0, I2COP_READ, true))
 		return 1;
 
 	return 0;
@@ -182,13 +183,23 @@ static int ihs_i2c_probe(struct i2c_adapter *adap, uchar chip)
 static int ihs_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
 			int alen, uchar *buffer, int len)
 {
-	return ihs_i2c_access(adap, chip, addr, alen, buffer, len, true);
+	u8 addr_bytes[4];
+
+	put_unaligned_le32(addr, addr_bytes);
+
+	return ihs_i2c_access(adap, chip, addr_bytes, alen, buffer, len,
+			      I2COP_READ);
 }
 
 static int ihs_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
 			 int alen, uchar *buffer, int len)
 {
-	return ihs_i2c_access(adap, chip, addr, alen, buffer, len, false);
+	u8 addr_bytes[4];
+
+	put_unaligned_le32(addr, addr_bytes);
+
+	return ihs_i2c_access(adap, chip, addr_bytes, alen, buffer, len,
+			      I2COP_WRITE);
 }
 
 static unsigned int ihs_i2c_set_bus_speed(struct i2c_adapter *adap,

--
2.11.0

#6 lore raw

PATCH RESEND v2 4/6 i2c: ihs_i2c: Prepare DM conversion

Hello Mario,

Am 15.01.2018 um 11:08 schrieb Mario Six:

Quoted 6 lines

Prepare the function interface of the ihs_i2c driver for DM conversion in a future patch.

While we're at it, fix some style violations, and make the code more readable.

Quoted 8 lines

---

v1 -> v2:
None

---
  drivers/i2c/ihs_i2c.c | 69 +++++++++++++++++++++++++++++----------------------
  1 file changed, 40 insertions(+), 29 deletions(-)

Applied to u-boot-i2c master

Thanks!

bye,
Heiko

Signature · 3 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs at denx.de
author
#7 lore raw

PATCH RESEND v2 5/6 i2c: ihs_i2c: Make DM compatible

In reply to Mario Six

Make the ihs_i2c driver DM-compatible; for legacy boards, the old functions are retained within #ifdefs.

No board uses the new DM driver yet; this patch only lays the foundation for future support.

---

v1 -> v2:
* Use put_unaligned_le32 instead of manual buffer copying
* Make driver live-tree compatible
* Accomodated for FPGA handle changes in gdsys_soc driver
* Re-added accidentially deleted IHS Kconfig entry
* Accomodated for IHS FPGA conversion to fpgamap

---
 drivers/i2c/Kconfig   |   6 ++
 drivers/i2c/ihs_i2c.c | 196 +++++++++++++++++++++++++++++++++++++++++++++++++-
 2 files changed, 199 insertions(+), 3 deletions(-)
drivers/i2c/Kconfig +6 -0
index 0630712e4a..d18bd077af 100644
@@ -254,6 +254,12 @@ config SYS_I2C_BUS_MAX
 	help
 	  Define the maximum number of available I2C buses.
 
+config SYS_I2C_IHS
+        bool "gdsys IHS I2C driver"
+        depends on DM_I2C
+        help
+          Support for gdsys IHS I2C driver on FPGA bus.
+
 source "drivers/i2c/muxes/Kconfig"
 
 endmenu
drivers/i2c/ihs_i2c.c +193 -3

317 lines not on this page · raw message

--
2.11.0

#8 lore raw

PATCH RESEND v2 5/6 i2c: ihs_i2c: Make DM compatible

Hello Mario,

Am 15.01.2018 um 11:08 schrieb Mario Six:

Quoted 16 lines

Make the ihs_i2c driver DM-compatible; for legacy boards, the old functions are retained within #ifdefs.

No board uses the new DM driver yet; this patch only lays the foundation for future support.

---

v1 -> v2:
* Use put_unaligned_le32 instead of manual buffer copying
* Make driver live-tree compatible
* Accomodated for FPGA handle changes in gdsys_soc driver
* Re-added accidentially deleted IHS Kconfig entry
* Accomodated for IHS FPGA conversion to fpgamap

Quoted 4 lines
---
  drivers/i2c/Kconfig   |   6 ++
  drivers/i2c/ihs_i2c.c | 196 +++++++++++++++++++++++++++++++++++++++++++++++++-
  2 files changed, 199 insertions(+), 3 deletions(-)

Applied to u-boot-i2c master

Thanks!

bye,
Heiko

Signature · 3 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs at denx.de
author
#9 lore raw

PATCH RESEND v2 6/6 i2c: ihs_i2c: Factor out send_buffer method

In reply to Mario Six

Simplify the driver logic by extracting a common send_buffer method.

---

v1 -> v2:
None

---
 drivers/i2c/ihs_i2c.c | 50 ++++++++++++++++++++++++++------------------------
 1 file changed, 26 insertions(+), 24 deletions(-)
drivers/i2c/ihs_i2c.c +26 -24
index b24afa472b..ee96cd50d5 100644
@@ -198,32 +198,48 @@ static int ihs_i2c_transfer(uchar chip, uchar *buffer, int len, bool read,
 }
 
 #ifdef CONFIG_DM_I2C
-static int ihs_i2c_address(struct udevice *dev, uchar chip, u8 *addr, int alen, bool hold_bus)
+static int ihs_i2c_send_buffer(struct udevice *dev, uchar chip, u8 *data, int len, bool hold_bus, int read)
 #else
-static int ihs_i2c_address(uchar chip, u8 *addr, int alen, bool hold_bus)
+static int ihs_i2c_send_buffer(uchar chip, u8 *data, int len, bool hold_bus,
+			       int read)
 #endif
 {
-	while (alen) {
-		int transfer = min(alen, 2);
-		bool is_last = alen <= transfer;
+	while (len) {
+		int transfer = min(len, 2);
+		bool is_last = len <= transfer;
 
 #ifdef CONFIG_DM_I2C
-		if (ihs_i2c_transfer(dev, chip, addr, transfer, I2COP_WRITE,
+		if (ihs_i2c_transfer(dev, chip, data, transfer, read,
 				     hold_bus ? false : is_last))
 			return 1;
 #else
-		if (ihs_i2c_transfer(chip, addr, transfer, I2COP_WRITE,
+		if (ihs_i2c_transfer(chip, data, transfer, read,
 				     hold_bus ? false : is_last))
 			return 1;
 #endif
 
-		alen -= transfer;
+		data += transfer;
+		len -= transfer;
 	}
 
 	return 0;
 }
 
 #ifdef CONFIG_DM_I2C
+static int ihs_i2c_address(struct udevice *dev, uchar chip, u8 *addr, int alen,
+			   bool hold_bus)
+#else
+static int ihs_i2c_address(uchar chip, u8 *addr, int alen, bool hold_bus)
+#endif
+{
+#ifdef CONFIG_DM_I2C
+	return ihs_i2c_send_buffer(dev, chip, addr, alen, hold_bus, I2COP_WRITE);
+#else
+	return ihs_i2c_send_buffer(chip, addr, alen, hold_bus, I2COP_WRITE);
+#endif
+}
+
+#ifdef CONFIG_DM_I2C
 static int ihs_i2c_access(struct udevice *dev, uchar chip, u8 *addr,
 			  int alen, uchar *buffer, int len, int read)
 #else
@@ -240,25 +256,11 @@ static int ihs_i2c_access(struct i2c_adapter *adap, uchar chip, u8 *addr,
 		return 1;
 #endif
 
-	while (len) {
-		int transfer = min(len, 2);
-		bool is_last = len <= transfer;
-
 #ifdef CONFIG_DM_I2C
-		if (ihs_i2c_transfer(dev, chip, buffer, transfer, read,
-				     is_last))
-			return 2;
+	return ihs_i2c_send_buffer(dev, chip, buffer, len, false, read);
 #else
-		if (ihs_i2c_transfer(chip, buffer, transfer, read,
-				     is_last))
-			return 2;
+	return ihs_i2c_send_buffer(chip, buffer, len, false, read);
 #endif
-
-		buffer += transfer;
-		len -= transfer;
-	}
-
-	return 0;
 }
 
 #ifdef CONFIG_DM_I2C

--
2.11.0

#10 lore raw

PATCH RESEND v2 6/6 i2c: ihs_i2c: Factor out send_buffer method

Hello Mario,

Am 15.01.2018 um 11:08 schrieb Mario Six:

Quoted 11 lines

Simplify the driver logic by extracting a common send_buffer method.

---

v1 -> v2:
None

---
  drivers/i2c/ihs_i2c.c | 50 ++++++++++++++++++++++++++------------------------
  1 file changed, 26 insertions(+), 24 deletions(-)

Applied to u-boot-i2c master

Thanks!

bye,
Heiko

Signature · 3 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs at denx.de
#11 lore raw

PATCH RESEND v2 1/6 i2c: fsl_i2c: Fix style violations

In reply to Mario Six

Hello Mario,

Am 15.01.2018 um 11:08 schrieb Mario Six:

Quoted 5 lines

Fix some style violations in the fsl_i2c I2C driver, and use shorter type names for variables in some cases.

Quoted 8 lines

---

v1 -> v2:
None

---
  drivers/i2c/fsl_i2c.c | 111 +++++++++++++++++++++++++-------------------------
  1 file changed, 56 insertions(+), 55 deletions(-)

Applied to u-boot-i2c master

Thanks!

bye,
Heiko

Signature · 3 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs at denx.de