pci layer may report wrong iomem resources data to drivers
lo,
aic7xxx driver mmio / dma on x86_64 linux broken here.
i need some comments and further investigation advice on this:
(resend, mozilla misconfig )
Quoted 105 lines
Quoted 26 lines · thomas schorpp
Quoted 6 lines · James Bottomley
Quoted 5 lines · thomas schorpp
Quoted 5 lines
i agree for this to be a 32bit dma busmaster chip, since
pci_resource_flagsand lspci say 64bit mem resource typeaic7xxx:
pci_resource_startfffff000*maddr 20000 mem64 4static int ahc_linux_pci_reserve_mem_region(struct
ahc_softc*ahc,u_long *bus_addr, uint8_t __iomem **maddr) { // u_long start; u_long len; int error; uint64_t start; ... printk(KERN_WARNING "aic7xxx: pci_resource_start 0x%llx mem64 0x%lx\n", start, pci_resource_flags(ahc->dev_softc, 1) & PCI_BASE_ADDRESS_MEM_TYPE_64 ); //schorpp return (error);aic7xxx:
pci_resource_start0xffffff000mem640x4
-----------------------------------------------^just to doublecheck the situation, posted lspci already.
Quoted 8 lines
will check next, if
len = pci_resource_len(ahc->dev_softc, 1); if (start != 0) { *bus_addr = start; // if (request_mem_region(start, 0x1000, "aic7xxx") == 0) if (request_mem_region(start, len, "aic7xxx") == 0)succeeds.
no. so the pci layer reports wrong start:
start = pci_resource_start(ahc->dev_softc, 1); len = pci_resource_len(ahc->dev_softc, 1); if (start != 0) { *bus_addr = start; // if (request_mem_region(start, 0x1000, "aic7xxx") == 0) if (request_mem_region(start, len, "aic7xxx") == 0) error = ENOMEM; printk(KERN_WARNING "aic7xxx: req_mem_region 0x%x memlen 0x%lx \n", error, len ); //schorpptom1:~# dmesg |grep aic aic7xxx: DMA_32BIT_MASK aic7xxx: req_mem_region 0x0 memlen 0x1000 aic7xxx: pci_resource_start 0xffffff000 *maddr 0x20000 mem64 0x4 aic7xxx: PCI Device 0:6:0 failed memory mapped test. Using PIO. aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBsQuoted 37 lines
Quoted 17 lines
Quoted 9 lines
Quoted 7 lines
we've a bug in the
x86_64linux pci config, BIOS is ok, the hardware worked fine in awinxp_x64test setup a few months ago.will ask LKML.
y
tomsorry, wrong according to http://download.adaptec.com/pdfs/aic7892.pdf.
Quoted 7 lines
"66 MHz, 64-bit, PCI interface that
supports zero wait-state memory;
also operates on 33 MHz, 32-bit
PCI busses"this chip is capable of 64bit addressing, as
pci_resource_nnnn(checking this) onx86_64platform and lspci onx86_64*and* AMDK7 configured kernels reports, even on PCI/32, right? or is it impossible to do multiplexed 64bit mem addressing on PCI/32?Quoted 7 lines
It can only do 37 bit addressing ... only the aic79xx can do the full 64 bits, so I suspect it should never get a 64 bit BAR, since it wouldn't be able to decode the full 32 bits. I can fix the mmio check not to hang, but the card won't actually work mmio until whatever's assigning the BAR above 32 bits is fixed (that could either be a kernel PCI bug or a BIOS bug).
ok, i trust in that. adaptor bios and mainboard bios *are* out,
winxp_x64driver handled all. so agree on kernel pci hal issue.
but what for constuint64_tmask_39bit=0x7FFFFFFFFFULL;
then?Quoted 6 lines
Quoted 2 lines
can adaptec.inc pls comment? since the aha19160 card is still in production state, i assume they want to have a linux
x86_64dma capable driver. so far it is not, or can other users having this card pls confirm my pci system broken?James
Quoted 8 lines
y
tom-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html