fix typo in drivers/block/Kconfig
PATCH 1/1 fix typo in drivers/block/Kconfig
Hello,
[ ... Fixed two minor typos. ...]
The following patch is against 2.6.21-rc4:
drivers/block/Kconfig +2 -2
@@ -383,7 +383,7 @@ default "16" depends on BLK_DEV_RAM help - The default value is 16 RAM disks. Change this if you know what + The default value is 16 RAM disks. Change this if you know what you are doing. If you boot from a filesystem that needs to be extracted in memory, you will need at least one RAM disk (e.g. root on cramfs).
@@ -393,7 +393,7 @@ default "4096" help The default value is 4096 kilobytes. Only change this if you know - what are you doing. If you are using IBM S/390, then set this to + what you are doing. If you are using IBM S/390, then set this to 8192. config BLK_DEV_RAM_BLOCKSIZE
---
regards,
Patrick
drivers/block/Kconfig +2 -2
@@ -383,7 +383,7 @@ default "16" depends on BLK_DEV_RAM help - The default value is 16 RAM disks. Change this if you know what + The default value is 16 RAM disks. Change this if you know what you are doing. If you boot from a filesystem that needs to be extracted in memory, you will need at least one RAM disk (e.g. root on cramfs).
@@ -393,7 +393,7 @@ default "4096" help The default value is 4096 kilobytes. Only change this if you know - what are you doing. If you are using IBM S/390, then set this to + what you are doing. If you are using IBM S/390, then set this to 8192. config BLK_DEV_RAM_BLOCKSIZE